[PATCH 00/20] mpt3sas: driver update

[Sreekanth Reddy <sreekanth.reddy@avagotech.com>]

This patch set contains all the features and defect fixes from Phase4 to Phase8.

Except below patch, all other patches have Reviewed-by signature from either
Martin K. Petersen, Johannes Thumshirn, Tomas Henzl and Joe Lawrence. Thanks for
reviewing these patches.
[PATCH v2 16/20] [SCSI] mpt3sas: Added support for customer specific branding

I am posting this patch set once again by promoting all the patches to v2,
so that it will be easy to pick up this patch set for next kernel release.

Thanks,
Sreekanth

Sreekanth Reddy (20):
  [SCSI] mpt3sas: Added Combined Reply Queue feature to extend
    up-to 96 MSIX vector support
  [SCSI] mpt3sas: Get IOC_FACTS information using  handshake
    protocol only after HBA card gets into READY or Operational
    state.
  [SCSI] mpt3sas: Don't block the drive when drive addition under
    the control of SML
  [SCSI] mpt3sas: Remove redundancy code while freeing the
    controller resources.
  [SCSI] mpt3sas: MPI 2.5 Rev I (2.5.4) specifications.
  [SCSI] mpt3sas: Provides the physical location of sas  drives
  [SCSI] mpt3sas: Bump mpt3sas Driver version to v5.100.00.00
  [SCSI] mpt3sas: Update MPI2 strings to MPI2.5
  [SCSI] mpt3sas: MPI 2.5 Rev J (2.5.5) specification and  2.00.34
    header files
  [SCSI] mpt3sas: Add branding string support for OEM's HBA
  [SCSI] mpt3sas: Add branding string support for OEM custom HBA
  [SCSI] mpt3sas: Bump mpt3sas driver version to v6.100.00.00
  [SCSI] mpt3sas: MPI 2.5 Rev K (2.5.6) specifications
  [SCSI] mpt3sas: Complete the SCSI command with DID_RESET status
    for log_info value 0x0x32010081
  [SCSI] mpt3sas: Return host busy error status to SML when DMA
    mapping of scatter gather list fails for a SCSI command
  [SCSI] mpt3sas: Added support for customer specific branding
  [SCSI] mpt3sas: Use alloc_ordered_workqueue() API instead of
    create_singlethread_workqueue() API
  [SCSI] mpt3sas: Call dma_mapping_error() API after  mapping an
    address with dma_map_single() API
  [SCSI] mpt3sas: When device is blocked followed by unblock fails,
    unfreeze the I/Os
  [SCSI] mpt3sas : Bump mpt3sas driver version to 9.100.00.00

 drivers/scsi/mpt3sas/mpi/mpi2.h          |   8 +-
 drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h     |  52 ++++-
 drivers/scsi/mpt3sas/mpi/mpi2_ioc.h      |   4 +-
 drivers/scsi/mpt3sas/mpi/mpi2_tool.h     |   4 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c      | 310 +++++++++++++++++++++++++---
 drivers/scsi/mpt3sas/mpt3sas_base.h      |  57 ++++-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 343 ++++++++++++++++++++++++++-----
 drivers/scsi/mpt3sas/mpt3sas_transport.c |  22 +-
 8 files changed, 694 insertions(+), 106 deletions(-)

-- 
2.0.2