From: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
To: jejb@kernel.org, hch@infradead.org
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
JBottomley@Parallels.com, Sathya.Prakash@avagotech.com,
linux-kernel@vger.kernel.org, jthumshirn@suse.de,
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Subject: [PATCH v2 09/20] [SCSI] mpt3sas: MPI 2.5 Rev J (2.5.5) specification and 2.00.34 header files
Date: Tue, 30 Jun 2015 12:24:55 +0530 [thread overview]
Message-ID: <1435647306-36956-10-git-send-email-Sreekanth.Reddy@avagotech.com> (raw)
In-Reply-To: <1435647306-36956-1-git-send-email-Sreekanth.Reddy@avagotech.com>
Following is the change set,
1. Added more defines for the BiosOptions field of MPI2_CONFIG_PAGE_BIOS_1.
2. Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC definition.
Changes in v2:
Patch version change only.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 5 +++--
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 14 ++++++++++++--
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 4 +++-
3 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index d730c5c..c2d127c 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.33
+ * mpi2.h Version: 02.00.34
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -90,6 +90,7 @@
* 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
* 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT
* --------------------------------------------------------------------------
*/
@@ -123,7 +124,7 @@
#define MPI2_VERSION_02_05 (0x0205)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x21)
+#define MPI2_HEADER_VERSION_UNIT (0x22)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 62dfbf6..cf2b6bf 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.27
+ * mpi2_cnfg.h Version: 02.00.28
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -175,6 +175,8 @@
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
* --------------------------------------------------------------------------
*/
@@ -1334,9 +1336,17 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
*PTR_MPI2_CONFIG_PAGE_BIOS_1,
Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
-#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
+#define MPI2_BIOSPAGE1_PAGEVERSION (0x06)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
+
#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 904910d..1629e5b 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.11
+ * mpi2_tool.h Version: 02.00.12
*
* Version History
* ---------------
@@ -33,6 +33,7 @@
* 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
* it uses MPI Chain SGE as well as MPI Simple SGE.
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
* --------------------------------------------------------------------------
*/
@@ -100,6 +101,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
--
2.0.2
next prev parent reply other threads:[~2015-06-30 6:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 6:54 [PATCH 00/20] mpt3sas: driver update Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 01/20] [SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 02/20] [SCSI] mpt3sas: Get IOC_FACTS information using handshake protocol only after HBA card gets into READY or Operational state Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 03/20] [SCSI] mpt3sas: Don't block the drive when drive addition under the control of SML Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 04/20] [SCSI] mpt3sas: Remove redundancy code while freeing the controller resources Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 05/20] [SCSI] mpt3sas: MPI 2.5 Rev I (2.5.4) specifications Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 06/20] [SCSI] mpt3sas: Provides the physical location of sas drives Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 07/20] [SCSI] mpt3sas: Bump mpt3sas Driver version to v5.100.00.00 Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 08/20] [SCSI] mpt3sas: Update MPI2 strings to MPI2.5 Sreekanth Reddy
2015-06-30 6:54 ` Sreekanth Reddy [this message]
2015-06-30 6:54 ` [PATCH v2 10/20] [SCSI] mpt3sas: Add branding string support for OEM's HBA Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 11/20] [SCSI] mpt3sas: Add branding string support for OEM custom HBA Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 12/20] [SCSI] mpt3sas: Bump mpt3sas driver version to v6.100.00.00 Sreekanth Reddy
2015-06-30 6:54 ` [PATCH v2 13/20] [SCSI] mpt3sas: MPI 2.5 Rev K (2.5.6) specifications Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 14/20] [SCSI] mpt3sas: Complete the SCSI command with DID_RESET status for log_info value 0x0x32010081 Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 15/20] [SCSI] mpt3sas: Return host busy error status to SML when DMA mapping of scatter gather list fails for a SCSI command Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 16/20] [SCSI] mpt3sas: Added support for customer specific branding Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 17/20] [SCSI] mpt3sas: Use alloc_ordered_workqueue() API instead of create_singlethread_workqueue() API Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 18/20] [SCSI] mpt3sas: Call dma_mapping_error() API after mapping an address with dma_map_single() API Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 19/20] [SCSI] mpt3sas: When device is blocked followed by unblock fails, unfreeze the I/Os Sreekanth Reddy
2015-06-30 6:55 ` [PATCH v2 20/20] [SCSI] mpt3sas : Bump mpt3sas driver version to 9.100.00.00 Sreekanth Reddy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435647306-36956-10-git-send-email-Sreekanth.Reddy@avagotech.com \
--to=sreekanth.reddy@avagotech.com \
--cc=JBottomley@Parallels.com \
--cc=Sathya.Prakash@avagotech.com \
--cc=hch@infradead.org \
--cc=jejb@kernel.org \
--cc=jthumshirn@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®