From: Ma Jun <majun258@huawei.com>
To: <Catalin.Marinas@arm.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <Will.Deacon@arm.com>,
<mark.rutland@arm.com>, <marc.zyngier@arm.com>,
<jason@lakedaemon.net>, <tglx@linutronix.de>,
<lizefan@huawei.com>, <huxinwei@huawei.com>,
<dingtianhong@huawei.com>, <zhaojunhua@hisilicon.com>,
<liguozhu@hisilicon.com>, <xuwei5@hisilicon.com>,
<wei.chenwei@hisilicon.com>, <guohanjun@huawei.com>,
<wuyun.wu@huawei.com>, <guodong.xu@linaro.org>,
<haojian.zhuang@linaro.org>, <zhangfei.gao@linaro.org>,
<usman.ahmad@linaro.org>
Subject: [PATCH v3 3/3] dt-binding:Documents the mbigen bindings
Date: Mon, 6 Jul 2015 15:09:08 +0800 [thread overview]
Message-ID: <1436166548-34920-4-git-send-email-majun258@huawei.com> (raw)
In-Reply-To: <1436166548-34920-1-git-send-email-majun258@huawei.com>
Add the mbigen msi interrupt controller bindings document
Change in v3:
---Change the compatible string
---Change the interrupt cells definition.
Signed-off-by: Ma Jun <majun258@huawei.com>
---
Documentation/devicetree/bindings/arm/mbigen.txt | 65 ++++++++++++++++++++++
1 files changed, 65 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mbigen.txt
diff --git a/Documentation/devicetree/bindings/arm/mbigen.txt b/Documentation/devicetree/bindings/arm/mbigen.txt
new file mode 100644
index 0000000..cf92ef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mbigen.txt
@@ -0,0 +1,65 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and gnerate the inteerrupt
+by wirtting ITS register.
+
+The mbigen and devices connect to mbigen have the following properties:
+
+
+Mbigen required properties:
+-------------------------------------------
+-compatible: Should be "hisilicon,mbigen-v2"
+-msi-parent: should specified the ITS mbigen connected
+-interrupt controller: Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value is 5 now.
+
+ The 1st cell is the device id.
+ The 2nd cell is the totall interrupt number of this device
+ The 3rd cell is the hardware pin number of the interrupt.
+ This value depends on the Soc design.
+ The 4th cell is the mbigen node number. This value should refer to the
+ vendor soc specification.
+ The 5th cell is the interrupt trigger type, encoded as follows:
+ 1 = edge triggered
+ 4 = level triggered
+
+- reg: Specifies the base physical address and size of the ITS
+ registers.
+
+Examples:
+
+ mbigen_dsa: interrupt-controller@c0080000 {
+ compatible = "hisilicon,mbigen-v2";
+ msi-parent = <&its_dsa>;
+ interrupt-controller;
+ #interrupt-cells = <5>;
+ reg = <0xc0080000 0x10000>;
+ };
+
+Device connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen node which device connected.
+-interrupts:specifies the interrupt source.The first cell is hwirq num, the
+ second number is trigger type.
+
+Examples:
+ smmu_dsa {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0xc0040000 0x0 0x20000>;
+ interrupt-parent = <&mbigen_dsa>;
+ interrupts = <0x40b20 3 78 6 1>,
+ <0x40b20 3 79 6 1>,
+ <0x40b20 3 80 6 1>;
+ smmu-cb-memtype = <0x0 0x1>;
+ };
+
--
1.7.1
next prev parent reply other threads:[~2015-07-06 7:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 7:09 [PATCH v3 0/3] IRQ/Gic-V3:Support Mbigen interrupt controller Ma Jun
2015-07-06 7:09 ` [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen " Ma Jun
2015-07-06 12:33 ` Thomas Gleixner
2015-07-08 4:21 ` majun (F)
2015-07-08 10:44 ` Thomas Gleixner
2015-07-16 8:35 ` majun (F)
2015-07-08 15:16 ` Marc Zyngier
2015-07-16 8:35 ` majun (F)
2015-07-16 8:52 ` Marc Zyngier
2015-07-16 9:22 ` majun (F)
2015-07-16 9:30 ` Marc Zyngier
2015-07-16 12:26 ` majun (F)
2015-07-16 13:37 ` Marc Zyngier
2015-07-27 2:25 ` majun (F)
2015-07-08 15:30 ` Marc Zyngier
2015-07-16 8:35 ` majun (F)
2015-07-06 7:09 ` [PATCH v3 2/3] IRQ/Gic-V3: Change arm-gic-its to support the Mbigen interrupt Ma Jun
2015-07-06 7:09 ` Ma Jun [this message]
2015-07-08 13:40 ` [PATCH v3 3/3] dt-binding:Documents the mbigen bindings Mark Rutland
2015-07-08 14:01 ` Marc Zyngier
2015-07-16 8:35 ` majun (F)
2015-07-20 16:38 ` Mark Rutland
2015-07-25 3:03 ` majun (F)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436166548-34920-4-git-send-email-majun258@huawei.com \
--to=majun258@huawei.com \
--cc=Catalin.Marinas@arm.com \
--cc=Will.Deacon@arm.com \
--cc=dingtianhong@huawei.com \
--cc=guodong.xu@linaro.org \
--cc=guohanjun@huawei.com \
--cc=haojian.zhuang@linaro.org \
--cc=huxinwei@huawei.com \
--cc=jason@lakedaemon.net \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=tglx@linutronix.de \
--cc=usman.ahmad@linaro.org \
--cc=wei.chenwei@hisilicon.com \
--cc=wuyun.wu@huawei.com \
--cc=xuwei5@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhaojunhua@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®