From: Yinghai Lu <yinghai@kernel.org>
To: Kees Cook <keescook@chromium.org>,
"H. Peter Anvin" <hpa@zytor.com>, Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 18/42] x86, kaslr: Remove useless codes
Date: Tue, 7 Jul 2015 13:20:04 -0700 [thread overview]
Message-ID: <1436300428-21163-19-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1436300428-21163-1-git-send-email-yinghai@kernel.org>
From: Baoquan He <bhe@redhat.com>
Several auxiliary functions and slots[] are not needed any more since
struct slot_area is used to store the slot info of kaslr now. Hence
remove them in this patch.
Signed-off-by: Baoquan He <bhe@redhat.com>
---
arch/x86/boot/compressed/aslr.c | 24 ------------------------
1 file changed, 24 deletions(-)
diff --git a/arch/x86/boot/compressed/aslr.c b/arch/x86/boot/compressed/aslr.c
index 9158882..7c0e1da 100644
--- a/arch/x86/boot/compressed/aslr.c
+++ b/arch/x86/boot/compressed/aslr.c
@@ -112,17 +112,6 @@ struct mem_vector {
#define MEM_AVOID_MAX 4
static struct mem_vector mem_avoid[MEM_AVOID_MAX];
-static bool mem_contains(struct mem_vector *region, struct mem_vector *item)
-{
- /* Item at least partially before region. */
- if (item->start < region->start)
- return false;
- /* Item at least partially after region. */
- if (item->start + item->size > region->start + region->size)
- return false;
- return true;
-}
-
static bool mem_overlaps(struct mem_vector *one, struct mem_vector *two)
{
/* Item one is entirely before item two. */
@@ -248,9 +237,6 @@ mem_min_overlap(struct mem_vector *img, struct mem_vector *out)
return min;
}
-static unsigned long slots[CONFIG_RANDOMIZE_BASE_MAX_OFFSET /
- CONFIG_PHYSICAL_ALIGN];
-
struct slot_area {
unsigned long addr;
int num;
@@ -281,16 +267,6 @@ static void store_slot_info(struct mem_vector *region, unsigned long image_size)
}
}
-static void slots_append(unsigned long addr)
-{
- /* Overflowing the slots list should be impossible. */
- if (slot_max >= CONFIG_RANDOMIZE_BASE_MAX_OFFSET /
- CONFIG_PHYSICAL_ALIGN)
- return;
-
- slots[slot_max++] = addr;
-}
-
static unsigned long slots_fetch_random(void)
{
unsigned long random;
--
1.8.4.5
next prev parent reply other threads:[~2015-07-07 20:26 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-07 20:19 [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Yinghai Lu
2015-07-07 20:19 ` [PATCH 01/42] x86, kasl: Remove not needed parameter for choose_kernel_location Yinghai Lu
2015-07-07 20:57 ` Kees Cook
2015-07-07 20:19 ` [PATCH 02/42] x86, boot: Move compressed kernel to end of buffer before decompressing Yinghai Lu
2015-07-07 21:22 ` Kees Cook
2015-07-07 20:19 ` [PATCH 03/42] x86, boot: Fix run_size calculation Yinghai Lu
2015-07-07 22:15 ` Kees Cook
2015-07-07 20:19 ` [PATCH 04/42] x86, kaslr: Kill not needed and wrong run_size calculation code Yinghai Lu
2015-07-07 22:18 ` Kees Cook
2015-07-07 20:19 ` [PATCH 05/42] x86, kaslr: rename output_size to output_run_size Yinghai Lu
2015-07-07 20:19 ` [PATCH 06/42] x86, kaslr: Consolidate mem_avoid array filling Yinghai Lu
2015-07-07 22:36 ` Kees Cook
2015-07-07 20:19 ` [PATCH 07/42] x86, boot: Move z_extract_offset calculation to header.S Yinghai Lu
2015-07-07 20:19 ` [PATCH 08/42] x86, kaslr: Get correct max_addr for relocs pointer Yinghai Lu
2015-07-07 22:40 ` Kees Cook
2015-07-07 20:19 ` [PATCH 09/42] x86, boot: Split kernel_ident_mapping_init to another file Yinghai Lu
2015-07-07 20:19 ` [PATCH 10/42] x86, 64bit: Set ident_mapping for kaslr Yinghai Lu
2015-07-07 20:19 ` [PATCH 11/42] x86, boot: Add checking for memcpy Yinghai Lu
2015-07-07 20:19 ` [PATCH 12/42] x86, kaslr: Fix a bug that relocation can not be handled when kernel is loaded above 2G Yinghai Lu
2015-07-07 22:42 ` Kees Cook
2015-07-07 20:19 ` [PATCH 13/42] x86, kaslr: Introduce struct slot_area to manage randomization slot info Yinghai Lu
2015-07-07 20:20 ` [PATCH 14/42] x86, kaslr: Add two functions which will be used later Yinghai Lu
2015-07-07 20:20 ` [PATCH 15/42] x86, kaslr: Introduce fetch_random_virt_offset to randomize the kernel text mapping address Yinghai Lu
2015-07-07 20:20 ` [PATCH 16/42] x86, kaslr: Randomize physical and virtual address of kernel separately Yinghai Lu
2015-07-07 20:20 ` [PATCH 17/42] x86, kaslr: Add support of kernel physical address randomization above 4G Yinghai Lu
2015-07-07 20:20 ` Yinghai Lu [this message]
2015-07-07 20:20 ` [PATCH 19/42] x86, kaslr: Allow random address could be below loaded address Yinghai Lu
2015-07-07 20:20 ` [PATCH 20/42] x86, boot: Add printf support for early console in compressed/misc.c Yinghai Lu
2015-07-07 20:20 ` [PATCH 21/42] x86, boot: Add more debug printout " Yinghai Lu
2015-07-07 20:20 ` [PATCH 22/42] x86, setup: Check early serial console per string instead of one char Yinghai Lu
2015-07-07 22:59 ` Kees Cook
2015-07-07 20:20 ` [PATCH 23/42] x86, setup: Use puts() instead of printf() in edd code Yinghai Lu
2015-07-07 20:20 ` [PATCH 24/42] x86: Setup early console as early as possible in x86_start_kernel() Yinghai Lu
2015-07-07 20:20 ` [PATCH 25/42] x86, boot: print compression suffix in decompress stage Yinghai Lu
2015-07-07 23:13 ` Kees Cook
2015-07-07 20:20 ` [PATCH 26/42] x86: remove not needed clear_page calling Yinghai Lu
2015-07-07 23:14 ` Kees Cook
2015-07-07 20:20 ` [PATCH 27/42] x86: restore end_of_ram to E820_RAM Yinghai Lu
2015-07-08 17:44 ` Matt Fleming
2015-07-09 1:41 ` Dan Williams
2015-07-09 7:45 ` Christoph Hellwig
2015-07-09 11:17 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 28/42] x86, boot: Allow 64bit EFI kernel to be loaded above 4G Yinghai Lu
2015-07-07 23:12 ` Kees Cook
2015-07-08 18:00 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 29/42] x86: Find correct 64 bit ramdisk address for microcode early update Yinghai Lu
2015-07-07 23:08 ` Kees Cook
2015-07-07 20:20 ` [PATCH 30/42] x86: Kill E820_RESERVED_KERN Yinghai Lu
2015-07-07 20:20 ` [PATCH 31/42] x86, efi: Copy SETUP_EFI data and access directly Yinghai Lu
2015-07-22 10:58 ` Matt Fleming
2015-07-24 2:07 ` Dave Young
2015-07-07 20:20 ` [PATCH 32/42] x86, of: Let add_dtb reserve setup_data locally Yinghai Lu
2015-07-07 20:20 ` [PATCH 33/42] x86, boot: Add add_pci handler for SETUP_PCI Yinghai Lu
2015-07-14 22:30 ` Bjorn Helgaas
2015-07-07 20:20 ` [PATCH 34/42] x86: Kill not used setup_data handling code Yinghai Lu
2015-07-07 20:20 ` [PATCH 35/42] x86, boot, PCI: Convert SETUP_PCI data to list Yinghai Lu
2015-07-14 22:35 ` Bjorn Helgaas
2015-07-15 1:57 ` Yinghai Lu
2015-07-07 20:20 ` [PATCH 36/42] x86, boot, PCI: Copy SETUP_PCI rom to kernel space Yinghai Lu
2015-07-07 20:20 ` [PATCH 37/42] x86, boot, PCI: Export SETUP_PCI data via sysfs Yinghai Lu
2015-07-07 20:20 ` [PATCH 38/42] x86: Fix typo in mark_rodata_ro Yinghai Lu
2015-07-07 23:05 ` Kees Cook
2015-07-07 20:20 ` [PATCH 39/42] x86, 64bit: add pfn_range_is_highmapped() Yinghai Lu
2015-07-07 20:20 ` [PATCH 40/42] x86, 64bit: remove highmap for not needed ranges Yinghai Lu
2015-07-07 23:17 ` Kees Cook
2015-07-07 20:20 ` [PATCH 41/42] x86, 64bit: Add __pa_high/__va_high Yinghai Lu
2015-07-07 20:20 ` [PATCH 42/42] x86: fix msr print again Yinghai Lu
2015-07-07 23:21 ` [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Kees Cook
2015-10-02 20:16 ` Kees Cook
2016-02-06 11:50 ` Baoquan He
2016-02-09 4:31 ` Kees Cook
2016-02-15 7:29 ` Baoquan He
2016-02-16 23:50 ` Kees Cook
2015-07-08 10:51 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436300428-21163-19-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhe@redhat.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome