From: Yinghai Lu <yinghai@kernel.org>
To: Kees Cook <keescook@chromium.org>,
"H. Peter Anvin" <hpa@zytor.com>, Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 41/42] x86, 64bit: Add __pa_high/__va_high
Date: Tue, 7 Jul 2015 13:20:27 -0700 [thread overview]
Message-ID: <1436300428-21163-42-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1436300428-21163-1-git-send-email-yinghai@kernel.org>
and use it to make the early page table setup code more readable,
as we are using kernel high mapping address.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/head64.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index a9f0299..cd0a820 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -37,6 +37,9 @@ extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD];
static unsigned int __initdata next_early_pgt = 2;
pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
+#define __va_high(x) ((void *)((unsigned long)(x) + __START_KERNEL_map - phys_base))
+#define __pa_high(x) ((unsigned long)(x) - __START_KERNEL_map + phys_base)
+
/* Wipe all early page tables except for the kernel symbol map */
static void __init reset_early_page_tables(void)
{
@@ -47,7 +50,7 @@ static void __init reset_early_page_tables(void)
next_early_pgt = 0;
- write_cr3(__pa_nodebug(early_level4_pgt));
+ write_cr3(__pa_high(early_level4_pgt));
}
/* Create a new PMD entry */
@@ -60,7 +63,7 @@ int __init early_make_pgtable(unsigned long address)
pmdval_t pmd, *pmd_p;
/* Invalid address or early pgt is done ? */
- if (physaddr >= MAXMEM || read_cr3() != __pa_nodebug(early_level4_pgt))
+ if (physaddr >= MAXMEM || read_cr3() != __pa_high(early_level4_pgt))
return -1;
again:
@@ -73,7 +76,7 @@ again:
* range and we might end up looping forever...
*/
if (pgd)
- pud_p = (pudval_t *)((pgd & PTE_PFN_MASK) + __START_KERNEL_map - phys_base);
+ pud_p = (pudval_t *)__va_high(pgd & PTE_PFN_MASK);
else {
if (next_early_pgt >= EARLY_DYNAMIC_PAGE_TABLES) {
reset_early_page_tables();
@@ -83,13 +86,13 @@ again:
pud_p = (pudval_t *)early_dynamic_pgts[next_early_pgt++];
for (i = 0; i < PTRS_PER_PUD; i++)
pud_p[i] = 0;
- *pgd_p = (pgdval_t)pud_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE;
+ *pgd_p = __pa_high(pud_p) + _KERNPG_TABLE;
}
pud_p += pud_index(address);
pud = *pud_p;
if (pud)
- pmd_p = (pmdval_t *)((pud & PTE_PFN_MASK) + __START_KERNEL_map - phys_base);
+ pmd_p = (pmdval_t *)__va_high(pud & PTE_PFN_MASK);
else {
if (next_early_pgt >= EARLY_DYNAMIC_PAGE_TABLES) {
reset_early_page_tables();
@@ -99,7 +102,7 @@ again:
pmd_p = (pmdval_t *)early_dynamic_pgts[next_early_pgt++];
for (i = 0; i < PTRS_PER_PMD; i++)
pmd_p[i] = 0;
- *pud_p = (pudval_t)pmd_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE;
+ *pud_p = __pa_high(pmd_p) + _KERNPG_TABLE;
}
pmd = (physaddr & PMD_MASK) + early_pmd_flags;
pmd_p[pmd_index(address)] = pmd;
--
1.8.4.5
next prev parent reply other threads:[~2015-07-07 20:23 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-07 20:19 [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Yinghai Lu
2015-07-07 20:19 ` [PATCH 01/42] x86, kasl: Remove not needed parameter for choose_kernel_location Yinghai Lu
2015-07-07 20:57 ` Kees Cook
2015-07-07 20:19 ` [PATCH 02/42] x86, boot: Move compressed kernel to end of buffer before decompressing Yinghai Lu
2015-07-07 21:22 ` Kees Cook
2015-07-07 20:19 ` [PATCH 03/42] x86, boot: Fix run_size calculation Yinghai Lu
2015-07-07 22:15 ` Kees Cook
2015-07-07 20:19 ` [PATCH 04/42] x86, kaslr: Kill not needed and wrong run_size calculation code Yinghai Lu
2015-07-07 22:18 ` Kees Cook
2015-07-07 20:19 ` [PATCH 05/42] x86, kaslr: rename output_size to output_run_size Yinghai Lu
2015-07-07 20:19 ` [PATCH 06/42] x86, kaslr: Consolidate mem_avoid array filling Yinghai Lu
2015-07-07 22:36 ` Kees Cook
2015-07-07 20:19 ` [PATCH 07/42] x86, boot: Move z_extract_offset calculation to header.S Yinghai Lu
2015-07-07 20:19 ` [PATCH 08/42] x86, kaslr: Get correct max_addr for relocs pointer Yinghai Lu
2015-07-07 22:40 ` Kees Cook
2015-07-07 20:19 ` [PATCH 09/42] x86, boot: Split kernel_ident_mapping_init to another file Yinghai Lu
2015-07-07 20:19 ` [PATCH 10/42] x86, 64bit: Set ident_mapping for kaslr Yinghai Lu
2015-07-07 20:19 ` [PATCH 11/42] x86, boot: Add checking for memcpy Yinghai Lu
2015-07-07 20:19 ` [PATCH 12/42] x86, kaslr: Fix a bug that relocation can not be handled when kernel is loaded above 2G Yinghai Lu
2015-07-07 22:42 ` Kees Cook
2015-07-07 20:19 ` [PATCH 13/42] x86, kaslr: Introduce struct slot_area to manage randomization slot info Yinghai Lu
2015-07-07 20:20 ` [PATCH 14/42] x86, kaslr: Add two functions which will be used later Yinghai Lu
2015-07-07 20:20 ` [PATCH 15/42] x86, kaslr: Introduce fetch_random_virt_offset to randomize the kernel text mapping address Yinghai Lu
2015-07-07 20:20 ` [PATCH 16/42] x86, kaslr: Randomize physical and virtual address of kernel separately Yinghai Lu
2015-07-07 20:20 ` [PATCH 17/42] x86, kaslr: Add support of kernel physical address randomization above 4G Yinghai Lu
2015-07-07 20:20 ` [PATCH 18/42] x86, kaslr: Remove useless codes Yinghai Lu
2015-07-07 20:20 ` [PATCH 19/42] x86, kaslr: Allow random address could be below loaded address Yinghai Lu
2015-07-07 20:20 ` [PATCH 20/42] x86, boot: Add printf support for early console in compressed/misc.c Yinghai Lu
2015-07-07 20:20 ` [PATCH 21/42] x86, boot: Add more debug printout " Yinghai Lu
2015-07-07 20:20 ` [PATCH 22/42] x86, setup: Check early serial console per string instead of one char Yinghai Lu
2015-07-07 22:59 ` Kees Cook
2015-07-07 20:20 ` [PATCH 23/42] x86, setup: Use puts() instead of printf() in edd code Yinghai Lu
2015-07-07 20:20 ` [PATCH 24/42] x86: Setup early console as early as possible in x86_start_kernel() Yinghai Lu
2015-07-07 20:20 ` [PATCH 25/42] x86, boot: print compression suffix in decompress stage Yinghai Lu
2015-07-07 23:13 ` Kees Cook
2015-07-07 20:20 ` [PATCH 26/42] x86: remove not needed clear_page calling Yinghai Lu
2015-07-07 23:14 ` Kees Cook
2015-07-07 20:20 ` [PATCH 27/42] x86: restore end_of_ram to E820_RAM Yinghai Lu
2015-07-08 17:44 ` Matt Fleming
2015-07-09 1:41 ` Dan Williams
2015-07-09 7:45 ` Christoph Hellwig
2015-07-09 11:17 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 28/42] x86, boot: Allow 64bit EFI kernel to be loaded above 4G Yinghai Lu
2015-07-07 23:12 ` Kees Cook
2015-07-08 18:00 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 29/42] x86: Find correct 64 bit ramdisk address for microcode early update Yinghai Lu
2015-07-07 23:08 ` Kees Cook
2015-07-07 20:20 ` [PATCH 30/42] x86: Kill E820_RESERVED_KERN Yinghai Lu
2015-07-07 20:20 ` [PATCH 31/42] x86, efi: Copy SETUP_EFI data and access directly Yinghai Lu
2015-07-22 10:58 ` Matt Fleming
2015-07-24 2:07 ` Dave Young
2015-07-07 20:20 ` [PATCH 32/42] x86, of: Let add_dtb reserve setup_data locally Yinghai Lu
2015-07-07 20:20 ` [PATCH 33/42] x86, boot: Add add_pci handler for SETUP_PCI Yinghai Lu
2015-07-14 22:30 ` Bjorn Helgaas
2015-07-07 20:20 ` [PATCH 34/42] x86: Kill not used setup_data handling code Yinghai Lu
2015-07-07 20:20 ` [PATCH 35/42] x86, boot, PCI: Convert SETUP_PCI data to list Yinghai Lu
2015-07-14 22:35 ` Bjorn Helgaas
2015-07-15 1:57 ` Yinghai Lu
2015-07-07 20:20 ` [PATCH 36/42] x86, boot, PCI: Copy SETUP_PCI rom to kernel space Yinghai Lu
2015-07-07 20:20 ` [PATCH 37/42] x86, boot, PCI: Export SETUP_PCI data via sysfs Yinghai Lu
2015-07-07 20:20 ` [PATCH 38/42] x86: Fix typo in mark_rodata_ro Yinghai Lu
2015-07-07 23:05 ` Kees Cook
2015-07-07 20:20 ` [PATCH 39/42] x86, 64bit: add pfn_range_is_highmapped() Yinghai Lu
2015-07-07 20:20 ` [PATCH 40/42] x86, 64bit: remove highmap for not needed ranges Yinghai Lu
2015-07-07 23:17 ` Kees Cook
2015-07-07 20:20 ` Yinghai Lu [this message]
2015-07-07 20:20 ` [PATCH 42/42] x86: fix msr print again Yinghai Lu
2015-07-07 23:21 ` [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Kees Cook
2015-10-02 20:16 ` Kees Cook
2016-02-06 11:50 ` Baoquan He
2016-02-09 4:31 ` Kees Cook
2016-02-15 7:29 ` Baoquan He
2016-02-16 23:50 ` Kees Cook
2015-07-08 10:51 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436300428-21163-42-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhe@redhat.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome