mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 0/2] extcon: palmas: am57xx-beagle-x15: use palmas for VBUS/ID detection
@ 2015-07-13 13:01 Roger Quadros
  2015-07-13 13:01 ` [PATCH 1/2] extcon: palmas: Support GPIO based USB ID detection Roger Quadros
  2015-07-13 13:01 ` [PATCH 2/2] ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 Roger Quadros
  0 siblings, 2 replies; 3+ messages in thread
From: Roger Quadros @ 2015-07-13 13:01 UTC (permalink / raw)
  To: myungjoo.ham, cw00.choi, tony
  Cc: nm, balbi, linux-omap, linux-kernel, Roger Quadros

Hi,

am57xx-beagle-x15 uses a variant of the Palmas chip and has
USB1 port's VBUS and ID connected to it.

However this Palmas variant does not support OTG ID detection but
does have GPIO support on the pin where ID line is connected.

This series adds GPIO based ID detection to the Palmas extcon
driver and updates am57xx-beagle-x15.dts to use Palmas
for VBUS and ID detection for USB1 port.

cheers,
-roger

Roger Quadros (2):
  extcon: palmas: Support GPIO based USB ID detection
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2

 .../devicetree/bindings/extcon/extcon-palmas.txt   |   5 +-
 arch/arm/boot/dts/am57xx-beagle-x15.dts            |  25 +++--
 drivers/extcon/extcon-palmas.c                     | 116 ++++++++++++++++++---
 include/linux/mfd/palmas.h                         |   6 ++
 4 files changed, 129 insertions(+), 23 deletions(-)

-- 
2.1.4


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2015-07-13 13:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-13 13:01 [PATCH 0/2] extcon: palmas: am57xx-beagle-x15: use palmas for VBUS/ID detection Roger Quadros
2015-07-13 13:01 ` [PATCH 1/2] extcon: palmas: Support GPIO based USB ID detection Roger Quadros
2015-07-13 13:01 ` [PATCH 2/2] ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 Roger Quadros

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®