[PATCH v3 0/2] Add Mediatek watchdog suspend resume and shutdown

[PATCH v3 0/2] Add Mediatek watchdog suspend resume and shutdown

[Eddie Huang]

This series add Mediatek watchdog suspend, resume and shutdown support.
These patches are based on v4.2-rc1

Change in v3:
Add mtk_wdt in subject line

Change in v2:
Use watchdog_active() to check whether watchdog been active.
Change to register suspend,resume function to dev_pm_ops

[PATCH v3 1/2] watchdog: mtk_wdt: add suspend/resume support

[Eddie Huang]

From: Greta Zhang <greta.zhang@mediatek.com>

add mediatek watchdog driver suspend/resume support

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/mtk_wdt.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 938b987..056412c 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -221,17 +221,47 @@ static int mtk_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int mtk_wdt_suspend(struct device *dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev))
+		mtk_wdt_stop(&mtk_wdt->wdt_dev);
+
+	return 0;
+}
+
+static int mtk_wdt_resume(struct device *dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev)) {
+		mtk_wdt_start(&mtk_wdt->wdt_dev);
+		mtk_wdt_ping(&mtk_wdt->wdt_dev);
+	}
+
+	return 0;
+}
+#endif
+
 static const struct of_device_id mtk_wdt_dt_ids[] = {
 	{ .compatible = "mediatek,mt6589-wdt" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
 
+static const struct dev_pm_ops mtk_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mtk_wdt_suspend,
+				mtk_wdt_resume)
+};
+
 static struct platform_driver mtk_wdt_driver = {
 	.probe		= mtk_wdt_probe,
 	.remove		= mtk_wdt_remove,
 	.driver		= {
 		.name		= DRV_NAME,
+		.pm		= &mtk_wdt_pm_ops,
 		.of_match_table	= mtk_wdt_dt_ids,
 	},
 };
-- 
1.8.1.1.dirty

[PATCH v3 2/2] watchdog: mtk_wdt: add wdt shutdown callback to disable wdt if enabled

[Eddie Huang]

From: Greta Zhang <greta.zhang@mediatek.com>

Without .shutdown(), watchdog might reset the system during power off.
For example, if watchdog's timeout is set to 30s, then it is reset to
zero by mtk_wdt_ping(). During power off, no app will ping watchdog,
but watchdog is still running and may trigger reset.

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/mtk_wdt.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 056412c..6ad9df9 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -210,6 +210,14 @@ static int mtk_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static void mtk_wdt_shutdown(struct platform_device *pdev)
+{
+	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev))
+		mtk_wdt_stop(&mtk_wdt->wdt_dev);
+}
+
 static int mtk_wdt_remove(struct platform_device *pdev)
 {
 	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
@@ -259,6 +267,7 @@ static const struct dev_pm_ops mtk_wdt_pm_ops = {
 static struct platform_driver mtk_wdt_driver = {
 	.probe		= mtk_wdt_probe,
 	.remove		= mtk_wdt_remove,
+	.shutdown	= mtk_wdt_shutdown,
 	.driver		= {
 		.name		= DRV_NAME,
 		.pm		= &mtk_wdt_pm_ops,
-- 
1.8.1.1.dirty