* [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices
@ 2015-07-17 14:55 Sjoerd Simons
2015-07-30 11:45 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Sjoerd Simons @ 2015-07-17 14:55 UTC (permalink / raw)
To: Marcel Holtmann, Gustavo Padovan
Cc: linux-bluetooth, linux-kernel, Daniel Drake, Larry Finger
Recognize Realtek devices which share wifi and bluetooth such as the
rtl8723AU by vendor and interface.
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=0724 Rev= 2.00
S: Manufacturer=Realtek
S: Product=802.11n WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723au
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 93339a4..3324c91 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -149,6 +149,10 @@ static const struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x8087, 0x0a5a),
.driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
+ /* Realtek devices sharing Bluetooth and Wifi*/
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
+ .driver_info = BTUSB_REALTEK },
+
{ } /* Terminating entry */
};
--
2.1.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices
2015-07-17 14:55 [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices Sjoerd Simons
@ 2015-07-30 11:45 ` Marcel Holtmann
2015-07-30 12:12 ` Sjoerd Simons
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2015-07-30 11:45 UTC (permalink / raw)
To: Sjoerd Simons
Cc: Gustavo F. Padovan, linux-bluetooth, linux-kernel, Daniel Drake,
Larry Finger
Hi Sjoerd,
> Recognize Realtek devices which share wifi and bluetooth such as the
> rtl8723AU by vendor and interface.
>
> T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=0724 Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=802.11n WLAN Adapter
> S: SerialNumber=00e04c000001
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723au
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us
>
> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 93339a4..3324c91 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -149,6 +149,10 @@ static const struct usb_device_id btusb_table[] = {
> { USB_DEVICE(0x8087, 0x0a5a),
> .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
>
> + /* Realtek devices sharing Bluetooth and Wifi*/
> + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
> + .driver_info = BTUSB_REALTEK },
> +
is this still needed after I applied the generic USB_INTERFACE_INFO patch?
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices
2015-07-30 11:45 ` Marcel Holtmann
@ 2015-07-30 12:12 ` Sjoerd Simons
0 siblings, 0 replies; 3+ messages in thread
From: Sjoerd Simons @ 2015-07-30 12:12 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Gustavo F. Padovan, linux-bluetooth, linux-kernel, Daniel Drake,
Larry Finger
On Thu, 2015-07-30 at 13:45 +0200, Marcel Holtmann wrote:
> Hi Sjoerd,
>
> > Recognize Realtek devices which share wifi and bluetooth such as
> > the
> > rtl8723AU by vendor and interface.
> >
> > T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=0bda ProdID=0724 Rev= 2.00
> > S: Manufacturer=Realtek
> > S: Product=802.11n WLAN Adapter
> > S: SerialNumber=00e04c000001
> > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
> > A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=rtl8723au
> > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us
> >
> > Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
> > ---
> > drivers/bluetooth/btusb.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 93339a4..3324c91 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -149,6 +149,10 @@ static const struct usb_device_id
> > btusb_table[] = {
> > { USB_DEVICE(0x8087, 0x0a5a),
> > .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
> >
> > + /* Realtek devices sharing Bluetooth and Wifi*/
> > + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
> > + .driver_info = BTUSB_REALTEK },
> > +
>
> is this still needed after I applied the generic USB_INTERFACE_INFO
> patch?
Noe as Daniel Drake mentioned in his submission, this patch is obsolete
now that the USB_INTERFACE_INFO change has landed.
--
Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Collabora Ltd.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-07-30 12:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-17 14:55 [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices Sjoerd Simons
2015-07-30 11:45 ` Marcel Holtmann
2015-07-30 12:12 ` Sjoerd Simons
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®