Re: [PATCH V3 2/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings

[Philipp Zabel <p.zabel@pengutronix.de>]

Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
> Add DT bindings documentation for hi6220 SoC reset controller.
> 
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
>  .../bindings/reset/hisilicon,hi6220-reset.txt      | 97 ++++++++++++++++++++++
>  1 file changed, 97 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> new file mode 100644
> index 0000000..200dc8e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> @@ -0,0 +1,97 @@
> +Hisilicon System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +The reset controller node must be a sub-node of the chip controller
> +node on SoCs.
> +
> +Required properties:
> +- compatible: may be "hisilicon,hi6220_reset_ctl"

+- compatible: may be "hisilicon,hi6220-reset-ctl"

> +- reg: should be register base and length as documented in the
> +  datasheet
> +- #reset-cells: 1, see below
> +
> +Example:
>+
> +	reset_ctrl: reset_ctrl@f7030000 {
> +		compatible = "hisilicon,hi6220_reset_ctl";

+		compatible = "hisilicon,hi6220-reset-ctl";

regards
Philipp