[PATCH v3 4/4] serial: samsung: Fix UART status handling in DMA mode

[Robert Baldyga <r.baldyga@samsung.com>]

So far, when interrupt occured in DMA mode, it was handled by terminating
DMA transfer and draining data remaining in RX FIFO. It worked well
until interrupt was caused by timeout, but the same interrupt can be
alse caused by special condition (eg. 'break'), which requires special
handling. In such case handling mechanism was the same - DMA transaction
was terminated and FIFO was drained, but any special conditions were
ingnored. Because of this in DMA mode there was no ability to use,
for example, Magic SysRq.

This patch fixes this problem by using s3c24xx_serial_rx_drain_fifo()
function instead of uart_rx_drain_fifo(), which does the same thing
(drains RX FIFO) plus checks UART status to detect special conditions
(such as 'break'). Thanks to this we have exactly the same UART status
handling in both DMA and PIO mode.

This change additionally simplifies RX handling code, as we no longer
need uart_rx_drain_fifo() function, so we can remove it.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/tty/serial/samsung.c | 30 +++---------------------------
 1 file changed, 3 insertions(+), 27 deletions(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 1d7dd86..d72cd73 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -385,32 +385,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
 	}
 }
 
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
-				     unsigned long ufstat);
-
-static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
-{
-	struct uart_port *port = &ourport->port;
-	struct tty_port *tty = &port->state->port;
-	unsigned int ch, ufstat;
-	unsigned int count;
-
-	ufstat = rd_regl(port, S3C2410_UFSTAT);
-	count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
-
-	if (!count)
-		return;
-
-	while (count-- > 0) {
-		ch = rd_regb(port, S3C2410_URXH);
-
-		ourport->port.icount.rx++;
-		tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	}
-
-	tty_flip_buffer_push(tty);
-}
-
 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -573,6 +547,8 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
 	ourport->rx_mode = S3C24XX_RX_PIO;
 }
 
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
+
 static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
 {
 	unsigned int utrstat, ufstat, received;
@@ -606,7 +582,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
 		enable_rx_pio(ourport);
 	}
 
-	uart_rx_drain_fifo(ourport);
+	s3c24xx_serial_rx_drain_fifo(ourport);
 
 	if (tty) {
 		tty_flip_buffer_push(t);
-- 
1.9.1