From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Aaron Sierra <asierra@xes-inc.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Peter Tyser <ptyser@xes-inc.com>,
Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Matt Fleming <matt.fleming@intel.com>
Subject: Re: [PATCH] mfd: lpc_ich: Separate device cells for clarity
Date: Tue, 22 Sep 2015 14:36:54 +0300 [thread overview]
Message-ID: <1442921814.8361.131.camel@linux.intel.com> (raw)
In-Reply-To: <20150919101329.GM3218@x1>
On Sat, 2015-09-19 at 11:13 +0100, Lee Jones wrote:
> On Thu, 17 Sep 2015, Andy Shevchenko wrote:
>
> > On Thu, 2015-09-03 at 14:14 -0500, Aaron Sierra wrote:
> > > The lpc_ich_cells array gives the wrong impression about the
> > > relationship between the watchdog and GPIO devices. They are
> > > completely distinct devices, so this patch separates the
> > > array into distinct mfd_cell structs per device.
> > >
> > > A side effect of removing the array, is that the lpc_cells enum
> > > is no longer needed.
> > >
> >
> > Looks good for me.
>
> Is that an Ack? If so, can you formally provide one please?
Sorry, might be late. Was too busy by some hw quirks yesterday.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> > > Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
> > > ---
> > > drivers/mfd/lpc_ich.c | 42 ++++++++++++++++++-------------------
> > > ----
> > > -
> > > 1 file changed, 18 insertions(+), 24 deletions(-)
> > >
> > > diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
> > > index 8de3439..7a01d430 100644
> > > --- a/drivers/mfd/lpc_ich.c
> > > +++ b/drivers/mfd/lpc_ich.c
> > > @@ -131,24 +131,18 @@ static struct resource gpio_ich_res[] = {
> > > },
> > > };
> > >
> > > -enum lpc_cells {
> > > - LPC_WDT = 0,
> > > - LPC_GPIO,
> > > +static struct mfd_cell lpc_ich_wdt_cell = {
> > > + .name = "iTCO_wdt",
> > > + .num_resources = ARRAY_SIZE(wdt_ich_res),
> > > + .resources = wdt_ich_res,
> > > + .ignore_resource_conflicts = true,
> > > };
> > >
> > > -static struct mfd_cell lpc_ich_cells[] = {
> > > - [LPC_WDT] = {
> > > - .name = "iTCO_wdt",
> > > - .num_resources = ARRAY_SIZE(wdt_ich_res),
> > > - .resources = wdt_ich_res,
> > > - .ignore_resource_conflicts = true,
> > > - },
> > > - [LPC_GPIO] = {
> > > - .name = "gpio_ich",
> > > - .num_resources = ARRAY_SIZE(gpio_ich_res),
> > > - .resources = gpio_ich_res,
> > > - .ignore_resource_conflicts = true,
> > > - },
> > > +static struct mfd_cell lpc_ich_gpio_cell = {
> > > + .name = "gpio_ich",
> > > + .num_resources = ARRAY_SIZE(gpio_ich_res),
> > > + .resources = gpio_ich_res,
> > > + .ignore_resource_conflicts = true,
> > > };
> > >
> > > /* chipset related info */
> > > @@ -881,7 +875,7 @@ static int lpc_ich_init_gpio(struct pci_dev
> > > *dev)
> > > base_addr = base_addr_cfg & 0x0000ff80;
> > > if (!base_addr) {
> > > dev_notice(&dev->dev, "I/O space for ACPI
> > > uninitialized\n");
> > > - lpc_ich_cells[LPC_GPIO].num_resources--;
> > > + lpc_ich_gpio_cell.num_resources--;
> > > goto gpe0_done;
> > > }
> > >
> > > @@ -895,7 +889,7 @@ static int lpc_ich_init_gpio(struct pci_dev
> > > *dev)
> > > * the platform_device subsystem doesn't see
> > > this
> > > resource
> > > * or it will register an invalid region.
> > > */
> > > - lpc_ich_cells[LPC_GPIO].num_resources--;
> > > + lpc_ich_gpio_cell.num_resources--;
> > > acpi_conflict = true;
> > > } else {
> > > lpc_ich_enable_acpi_space(dev);
> > > @@ -933,14 +927,14 @@ gpe0_done:
> > > lpc_chipset_info[priv->chipset].use_gpio = ret;
> > > lpc_ich_enable_gpio_space(dev);
> > >
> > > - lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]);
> > > + lpc_ich_finalize_cell(dev, &lpc_ich_gpio_cell);
> > > ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > - &lpc_ich_cells[LPC_GPIO], 1, NULL,
> > > 0,
> > > NULL);
> > > + &lpc_ich_gpio_cell, 1, NULL, 0,
> > > NULL);
> > >
> > > gpio_done:
> > > if (acpi_conflict)
> > > pr_warn("Resource conflict(s) found affecting
> > > %s\n",
> > > - lpc_ich_cells[LPC_GPIO].name);
> > > + lpc_ich_gpio_cell.name);
> > > return ret;
> > > }
> > >
> > > @@ -984,7 +978,7 @@ static int lpc_ich_init_wdt(struct pci_dev
> > > *dev)
> > > */
> > > if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
> > > /* Don't register iomem for TCO ver 1 */
> > > - lpc_ich_cells[LPC_WDT].num_resources--;
> > > + lpc_ich_wdt_cell.num_resources--;
> > > } else if (lpc_chipset_info[priv->chipset].iTCO_version
> > > ==
> > > 2) {
> > > pci_read_config_dword(dev, RCBABASE,
> > > &base_addr_cfg);
> > > base_addr = base_addr_cfg & 0xffffc000;
> > > @@ -1007,9 +1001,9 @@ static int lpc_ich_init_wdt(struct pci_dev
> > > *dev)
> > > res->end = base_addr + ACPIBASE_PMC_END;
> > > }
> > >
> > > - lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
> > > + lpc_ich_finalize_cell(dev, &lpc_ich_wdt_cell);
> > > ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > - &lpc_ich_cells[LPC_WDT], 1, NULL,
> > > 0,
> > > NULL);
> > > + &lpc_ich_wdt_cell, 1, NULL, 0,
> > > NULL);
> > >
> > > wdt_done:
> > > return ret;
> >
>
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2015-09-22 11:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <665163563.75615.1441306612262.JavaMail.zimbra@xes-inc.com>
2015-09-03 19:14 ` Aaron Sierra
2015-09-17 16:17 ` Andy Shevchenko
2015-09-19 10:13 ` Lee Jones
2015-09-22 11:36 ` Andy Shevchenko [this message]
2015-09-19 10:16 ` Lee Jones
2015-09-21 17:37 ` Aaron Sierra
2015-09-21 23:13 ` Lee Jones
2015-09-22 22:41 ` Lee Jones
2015-09-23 0:04 ` [PATCH v2] " Aaron Sierra
2015-09-23 0:31 ` Lee Jones
2015-09-23 14:13 ` Aaron Sierra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442921814.8361.131.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=asierra@xes-inc.com \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=matt.fleming@intel.com \
--cc=mika.westerberg@linux.intel.com \
--cc=ptyser@xes-inc.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome