mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Li Ming <ming.li@zohomail.com>
To: Alison Schofield <alison.schofield@intel.com>, dave.jiang@intel.com
Cc: dave@stgolabs.net, jonathan.cameron@huawei.com,
	vishal.l.verma@intel.com, ira.weiny@intel.com,
	dan.j.williams@intel.com, linux-cxl@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] cxl/acpi: Fix using extra xormaps for address translation
Date: Fri, 16 Jan 2026 17:54:13 +0800	[thread overview]
Message-ID: <1442ea88-ae86-4ffa-9c79-13879d729bd8@zohomail.com> (raw)
In-Reply-To: <aWkqVFud7UA5CRie@aschofie-mobl2.lan>


在 2026/1/16 01:56, Alison Schofield 写道:
> On Thu, Jan 15, 2026 at 09:16:48PM +0800, Li Ming wrote:
>> CXL r3.1 Table 9-22 defines a fixed number of XOR maps for interleave
>> arithmetic based on the number of interleave ways, as reflected by
>> hbiw_to_nr_maps[].
>>
>> The current implementation applies all XOR maps during address
>> translation, but it should use the spec-defined number of XOR maps
>> derived from the number of interleave ways.
>>
>> Fixes: 3b2fedcd75e3 ("cxl: Restore XOR'd position bits during address translation")
>> Signed-off-by: Li Ming <ming.li@zohomail.com>
> Ming,
>
> I previously sent similar patch and then recalled it for the reason
> described in this thread.
> https://lore.kernel.org/linux-cxl/26c7ca6f-eb5f-4f20-8dba-e62e43e3e1b5@intel.com
>
> The above was all before
> 	"4fe516d2ad1a6 cxl/acpi: Make the XOR calculations available for testing"
> where I added input param checking and introduced nr_maps_to_apply.
>
> I don't think it is necessary to use nr_maps_to_apply in the
> for loop once the params have been validated. So maybe this patch
> is a cleanup on commit 4fe516d2ad1a6 rather than a fix.
>
> Please take a look again and let me know if I'm wrong again ;)
>
> --Alison

Hi Alison,


Thanks for pointing it out, you are right, it is not a bug. After 
reviewing cxl_parse_cxims(), the cxmisd->xormaps stores the correct 
number of xor maps based on the interleave ways. In fact, 
nr_maps_to_apply is equal to cximsd->nr_maps in cxl_do_xormap_calc(), So 
it is not needed to change it.


Hi Alison and Dave,


Please ignore this patch, apologies for the noise.


Thanks

Ming

>
>> ---
>>   drivers/cxl/acpi.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
>> index 77ac940e3013..5f84d01e7d39 100644
>> --- a/drivers/cxl/acpi.c
>> +++ b/drivers/cxl/acpi.c
>> @@ -61,7 +61,7 @@ u64 cxl_do_xormap_calc(struct cxl_cxims_data *cximsd, u64 addr, int hbiw)
>>   	 * bits results in val==0, if odd the XOR result is val==1.
>>   	 */
>>   
>> -	for (int i = 0; i < cximsd->nr_maps; i++) {
>> +	for (int i = 0; i < nr_maps_to_apply; i++) {
>>   		if (!cximsd->xormaps[i])
>>   			continue;
>>   		pos = __ffs(cximsd->xormaps[i]);
>> -- 
>> 2.34.1
>>

      reply	other threads:[~2026-01-16  9:54 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-15 13:16 Li Ming
2026-01-15 16:12 ` Dave Jiang
2026-01-15 17:56 ` Alison Schofield
2026-01-16  9:54   ` Li Ming [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442ea88-ae86-4ffa-9c79-13879d729bd8@zohomail.com \
    --to=ming.li@zohomail.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®