From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: Lidza Louina <lidza.louina@gmail.com>,
Mark Hounschell <markh@compro.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
driverdev-devel@linuxdriverproject.org,
devel@driverdev.osuosl.org,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH RESEND 2/6] staging: dgnc: remove blankline before brace
Date: Sun, 4 Oct 2015 19:50:11 +0530 [thread overview]
Message-ID: <1443968415-7397-3-git-send-email-sudipm.mukherjee@gmail.com> (raw)
In-Reply-To: <1443968415-7397-1-git-send-email-sudipm.mukherjee@gmail.com>
Blank lines are not needed before closing braces. checkpatch was giving
warning about this.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
---
drivers/staging/dgnc/dgnc_cls.c | 7 -------
drivers/staging/dgnc/dgnc_driver.c | 2 --
drivers/staging/dgnc/dgnc_mgmt.c | 1 -
drivers/staging/dgnc/dgnc_neo.c | 1 -
drivers/staging/dgnc/dgnc_sysfs.c | 1 -
drivers/staging/dgnc/dgnc_tty.c | 4 ----
6 files changed, 16 deletions(-)
diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 944982a..e7c946e 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -115,7 +115,6 @@ static inline void cls_set_cts_flow_control(struct channel_t *ch)
&ch->ch_cls_uart->isr_fcr);
ch->ch_t_tlevel = 16;
-
}
static inline void cls_set_ixon_flow_control(struct channel_t *ch)
@@ -161,7 +160,6 @@ static inline void cls_set_ixon_flow_control(struct channel_t *ch)
writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
&ch->ch_cls_uart->isr_fcr);
-
}
static inline void cls_set_no_output_flow_control(struct channel_t *ch)
@@ -205,7 +203,6 @@ static inline void cls_set_no_output_flow_control(struct channel_t *ch)
ch->ch_r_watermark = 0;
ch->ch_t_tlevel = 16;
ch->ch_r_tlevel = 16;
-
}
static inline void cls_set_rts_flow_control(struct channel_t *ch)
@@ -244,7 +241,6 @@ static inline void cls_set_rts_flow_control(struct channel_t *ch)
ch->ch_r_watermark = 4;
ch->ch_r_tlevel = 8;
-
}
static inline void cls_set_ixoff_flow_control(struct channel_t *ch)
@@ -286,7 +282,6 @@ static inline void cls_set_ixoff_flow_control(struct channel_t *ch)
writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
&ch->ch_cls_uart->isr_fcr);
-
}
static inline void cls_set_no_input_flow_control(struct channel_t *ch)
@@ -325,7 +320,6 @@ static inline void cls_set_no_input_flow_control(struct channel_t *ch)
ch->ch_t_tlevel = 16;
ch->ch_r_tlevel = 16;
-
}
/*
@@ -746,7 +740,6 @@ static void cls_tasklet(unsigned long data)
}
spin_unlock_irqrestore(&bd->bd_intr_lock, flags);
-
}
/*
diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c
index 926808b..4bb3e6f 100644
--- a/drivers/staging/dgnc/dgnc_driver.c
+++ b/drivers/staging/dgnc/dgnc_driver.c
@@ -529,7 +529,6 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
dev_err(&brd->pdev->dev,
"Didn't find any compatible Neo/Classic PCI boards.\n");
return -ENXIO;
-
}
/*
@@ -581,7 +580,6 @@ failed:
brd->dpastatus = BD_NOFEP;
return -ENXIO;
-
}
static int dgnc_finalize_board_init(struct dgnc_board *brd)
diff --git a/drivers/staging/dgnc/dgnc_mgmt.c b/drivers/staging/dgnc/dgnc_mgmt.c
index 81f0da2..e8aaf35 100644
--- a/drivers/staging/dgnc/dgnc_mgmt.c
+++ b/drivers/staging/dgnc/dgnc_mgmt.c
@@ -251,7 +251,6 @@ long dgnc_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
break;
}
-
}
return 0;
diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 09d3de7..fb95282 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -901,7 +901,6 @@ static void neo_tasklet(unsigned long data)
/* Allow interrupt routine to access the interrupt register again */
spin_unlock_irqrestore(&bd->bd_intr_lock, flags);
-
}
/*
diff --git a/drivers/staging/dgnc/dgnc_sysfs.c b/drivers/staging/dgnc/dgnc_sysfs.c
index c8a6c28..dffb4af 100644
--- a/drivers/staging/dgnc/dgnc_sysfs.c
+++ b/drivers/staging/dgnc/dgnc_sysfs.c
@@ -695,7 +695,6 @@ void dgnc_create_tty_sysfs(struct un_t *un, struct device *c)
}
dev_set_drvdata(c, un);
-
}
void dgnc_remove_tty_sysfs(struct device *c)
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index 497e1f4..ddf0e41 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -374,7 +374,6 @@ int dgnc_tty_init(struct dgnc_board *brd)
ch->ch_pun.un_sysfs = classp;
dgnc_create_tty_sysfs(&ch->ch_pun, classp);
}
-
}
return 0;
@@ -1368,7 +1367,6 @@ static void dgnc_tty_hangup(struct tty_struct *tty)
/* flush the transmit queues */
dgnc_tty_flush_buffer(tty);
-
}
/*
@@ -1981,7 +1979,6 @@ static int dgnc_tty_send_break(struct tty_struct *tty, int msec)
spin_unlock_irqrestore(&ch->ch_lock, flags);
return 0;
-
}
/*
@@ -2744,7 +2741,6 @@ static int dgnc_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
~(UN_LOW|UN_EMPTY);
wake_up_interruptible(&ch->ch_pun.un_flags_wait);
}
-
}
}
--
1.9.1
next prev parent reply other threads:[~2015-10-04 14:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-04 14:20 [PATCH RESEND 0/6] staging: dgnc: checkpatch cleanups Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 1/6] staging: dgnc: remove multiple blank lines Sudip Mukherjee
2015-10-04 14:20 ` Sudip Mukherjee [this message]
2015-10-04 14:20 ` [PATCH RESEND 3/6] staging: dgnc: remove blankline after brace Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 4/6] staging: dgnc: remove space after cast Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 5/6] staging: dgnc: alignment style Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 6/6] staging: dgnc: remove parenthesis Sudip Mukherjee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443968415-7397-3-git-send-email-sudipm.mukherjee@gmail.com \
--to=sudipm.mukherjee@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=lidza.louina@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®