mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: Lidza Louina <lidza.louina@gmail.com>,
	Mark Hounschell <markh@compro.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
	driverdev-devel@linuxdriverproject.org,
	devel@driverdev.osuosl.org,
	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH RESEND 5/6] staging: dgnc: alignment style
Date: Sun,  4 Oct 2015 19:50:14 +0530	[thread overview]
Message-ID: <1443968415-7397-6-git-send-email-sudipm.mukherjee@gmail.com> (raw)
In-Reply-To: <1443968415-7397-1-git-send-email-sudipm.mukherjee@gmail.com>

checkpatch was warning us that the alignment should match the open
parenthesis.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
---
 drivers/staging/dgnc/dgnc_cls.c    | 14 +++++++-------
 drivers/staging/dgnc/dgnc_driver.c |  2 +-
 drivers/staging/dgnc/dgnc_neo.c    |  2 +-
 drivers/staging/dgnc/dgnc_tty.c    | 26 +++++++++++++-------------
 4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 50fe22b..75040da 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -518,7 +518,7 @@ static void cls_param(struct tty_struct *tty)
 		 * unit is NOT open
 		 */
 		if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
-					 (un->un_type == DGNC_PRINT))
+		    (un->un_type == DGNC_PRINT))
 			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
 		else
 			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
@@ -532,7 +532,7 @@ static void cls_param(struct tty_struct *tty)
 		jindex = baud;
 
 		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) &&
-								(jindex < 16)) {
+		    (jindex < 16)) {
 			baud = bauds[iindex][jindex];
 		} else {
 			baud = 0;
@@ -641,7 +641,7 @@ static void cls_param(struct tty_struct *tty)
 		 * disable flow control
 		 */
 		if ((ch->ch_startc == _POSIX_VDISABLE) ||
-					 (ch->ch_stopc == _POSIX_VDISABLE))
+		    (ch->ch_stopc == _POSIX_VDISABLE))
 			cls_set_no_output_flow_control(ch);
 		else
 			cls_set_ixon_flow_control(ch);
@@ -657,7 +657,7 @@ static void cls_param(struct tty_struct *tty)
 		 * flow control
 		 */
 		if ((ch->ch_startc == _POSIX_VDISABLE) ||
-				(ch->ch_stopc == _POSIX_VDISABLE))
+		    (ch->ch_stopc == _POSIX_VDISABLE))
 			cls_set_no_input_flow_control(ch);
 		else
 			cls_set_ixoff_flow_control(ch);
@@ -933,7 +933,7 @@ static void cls_flush_uart_write(struct channel_t *ch)
 		return;
 
 	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
-						&ch->ch_cls_uart->isr_fcr);
+	       &ch->ch_cls_uart->isr_fcr);
 	udelay(10);
 
 	ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
@@ -979,7 +979,7 @@ static void cls_copy_data_from_queue_to_uart(struct channel_t *ch)
 
 	/* If port is "stopped", don't send any data to the UART */
 	if ((ch->ch_flags & CH_FORCED_STOP) ||
-				 (ch->ch_flags & CH_BREAK_SENDING))
+	    (ch->ch_flags & CH_BREAK_SENDING))
 		goto exit_unlock;
 
 	if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
@@ -1169,7 +1169,7 @@ static void cls_uart_init(struct channel_t *ch)
 	readb(&ch->ch_cls_uart->txrx);
 
 	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
-						 &ch->ch_cls_uart->isr_fcr);
+	       &ch->ch_cls_uart->isr_fcr);
 	udelay(10);
 
 	ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c
index 0336666..619baa9 100644
--- a/drivers/staging/dgnc/dgnc_driver.c
+++ b/drivers/staging/dgnc/dgnc_driver.c
@@ -237,7 +237,7 @@ static int dgnc_start(void)
 	}
 
 	dev = device_create(dgnc_class, NULL,
-			MKDEV(dgnc_Major, 0),
+			    MKDEV(dgnc_Major, 0),
 			NULL, "dgnc_mgmt");
 	if (IS_ERR(dev)) {
 		rc = PTR_ERR(dev);
diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 0d7ba53..99287bb 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -1390,7 +1390,7 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 
 	/* If port is "stopped", don't send any data to the UART */
 	if ((ch->ch_flags & CH_FORCED_STOP) ||
-		 (ch->ch_flags & CH_BREAK_SENDING))
+	    (ch->ch_flags & CH_BREAK_SENDING))
 		goto exit_unlock;
 
 	/*
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index 6c71a2f..18f0dae 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -365,12 +365,12 @@ int dgnc_tty_init(struct dgnc_board *brd)
 			struct device *classp;
 
 			classp = tty_register_device(&brd->SerialDriver, i,
-				&(ch->ch_bd->pdev->dev));
+						     &(ch->ch_bd->pdev->dev));
 			ch->ch_tun.un_sysfs = classp;
 			dgnc_create_tty_sysfs(&ch->ch_tun, classp);
 
 			classp = tty_register_device(&brd->PrintDriver, i,
-				&(ch->ch_bd->pdev->dev));
+						     &(ch->ch_bd->pdev->dev));
 			ch->ch_pun.un_sysfs = classp;
 			dgnc_create_tty_sysfs(&ch->ch_pun, classp);
 		}
@@ -934,7 +934,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
 
 	if (ch->ch_tun.un_flags & UN_ISOPEN) {
 		if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-			ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
+		    ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
 			spin_unlock_irqrestore(&ch->ch_lock, flags);
 			(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
 			spin_lock_irqsave(&ch->ch_lock, flags);
@@ -948,7 +948,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
 		 */
 		if (ch->ch_tun.un_flags & UN_EMPTY) {
 			if ((qlen == 0) &&
-			   (ch->ch_bd->bd_ops->get_uart_bytes_left(ch) == 0)) {
+			    (ch->ch_bd->bd_ops->get_uart_bytes_left(ch) == 0)) {
 				ch->ch_tun.un_flags &= ~(UN_EMPTY);
 
 				/*
@@ -976,7 +976,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
 
 	if (ch->ch_pun.un_flags & UN_ISOPEN) {
 		if ((ch->ch_pun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-			ch->ch_pun.un_tty->ldisc->ops->write_wakeup) {
+		    ch->ch_pun.un_tty->ldisc->ops->write_wakeup) {
 			spin_unlock_irqrestore(&ch->ch_lock, flags);
 			(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
 			spin_lock_irqsave(&ch->ch_lock, flags);
@@ -1038,7 +1038,7 @@ static int dgnc_tty_open(struct tty_struct *tty, struct file *file)
 	 * sleep waiting for it to happen or they cancel the open.
 	 */
 	rc = wait_event_interruptible(brd->state_wait,
-		(brd->state & BOARD_READY));
+				      (brd->state & BOARD_READY));
 
 	if (rc)
 		return rc;
@@ -1440,7 +1440,7 @@ static void dgnc_tty_close(struct tty_struct *tty, struct file *file)
 		 */
 		if ((un->un_type == DGNC_PRINT) && (ch->ch_flags & CH_PRON)) {
 			dgnc_wmove(ch, ch->ch_digi.digi_offstr,
-				(int)ch->ch_digi.digi_offlen);
+				   (int)ch->ch_digi.digi_offlen);
 			ch->ch_flags &= ~CH_PRON;
 		}
 
@@ -1487,7 +1487,7 @@ static void dgnc_tty_close(struct tty_struct *tty, struct file *file)
 		 */
 		if ((un->un_type == DGNC_PRINT) && (ch->ch_flags & CH_PRON)) {
 			dgnc_wmove(ch, ch->ch_digi.digi_offstr,
-				(int)ch->ch_digi.digi_offlen);
+				   (int)ch->ch_digi.digi_offlen);
 			ch->ch_flags &= ~CH_PRON;
 		}
 	}
@@ -1690,7 +1690,7 @@ static int dgnc_tty_put_char(struct tty_struct *tty, unsigned char c)
  * In here exists all the Transparent Print magic as well.
  */
 static int dgnc_tty_write(struct tty_struct *tty,
-		const unsigned char *buf, int count)
+			  const unsigned char *buf, int count)
 {
 	struct channel_t *ch = NULL;
 	struct un_t *un = NULL;
@@ -1756,7 +1756,7 @@ static int dgnc_tty_write(struct tty_struct *tty,
 	 */
 	if ((un->un_type == DGNC_PRINT) && !(ch->ch_flags & CH_PRON)) {
 		dgnc_wmove(ch, ch->ch_digi.digi_onstr,
-		    (int)ch->ch_digi.digi_onlen);
+			   (int)ch->ch_digi.digi_onlen);
 		head = (ch->ch_w_head) & tmask;
 		ch->ch_flags |= CH_PRON;
 	}
@@ -1767,7 +1767,7 @@ static int dgnc_tty_write(struct tty_struct *tty,
 	 */
 	if ((un->un_type != DGNC_PRINT) && (ch->ch_flags & CH_PRON)) {
 		dgnc_wmove(ch, ch->ch_digi.digi_offstr,
-			(int)ch->ch_digi.digi_offlen);
+			   (int)ch->ch_digi.digi_offlen);
 		head = (ch->ch_w_head) & tmask;
 		ch->ch_flags &= ~CH_PRON;
 	}
@@ -1880,7 +1880,7 @@ static int dgnc_tty_tiocmget(struct tty_struct *tty)
  */
 
 static int dgnc_tty_tiocmset(struct tty_struct *tty,
-		unsigned int set, unsigned int clear)
+			     unsigned int set, unsigned int clear)
 {
 	struct dgnc_board *bd;
 	struct channel_t *ch;
@@ -2547,7 +2547,7 @@ static void dgnc_tty_flush_buffer(struct tty_struct *tty)
  * The usual assortment of ioctl's
  */
 static int dgnc_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
-		unsigned long arg)
+			  unsigned long arg)
 {
 	struct dgnc_board *bd;
 	struct channel_t *ch;
-- 
1.9.1


  parent reply	other threads:[~2015-10-04 14:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-04 14:20 [PATCH RESEND 0/6] staging: dgnc: checkpatch cleanups Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 1/6] staging: dgnc: remove multiple blank lines Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 2/6] staging: dgnc: remove blankline before brace Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 3/6] staging: dgnc: remove blankline after brace Sudip Mukherjee
2015-10-04 14:20 ` [PATCH RESEND 4/6] staging: dgnc: remove space after cast Sudip Mukherjee
2015-10-04 14:20 ` Sudip Mukherjee [this message]
2015-10-04 14:20 ` [PATCH RESEND 6/6] staging: dgnc: remove parenthesis Sudip Mukherjee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443968415-7397-6-git-send-email-sudipm.mukherjee@gmail.com \
    --to=sudipm.mukherjee@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lidza.louina@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markh@compro.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®