* [PATCH 1/4] ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
2015-10-22 18:13 [PATCH 0/4] Sony Xperia Z dts Bjorn Andersson
@ 2015-10-22 18:13 ` Bjorn Andersson
2015-10-22 18:13 ` [PATCH 2/4] ARM: dts: qcom: apq8064: Declare all pm8921 regulators Bjorn Andersson
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2015-10-22 18:13 UTC (permalink / raw)
To: Andy Gross
Cc: Srinivas Kandagatla, John Stultz, devicetree, linux-arm-kernel,
linux-arm-msm, linux-kernel
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762b53ea..1b64723bd8a0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -11,6 +11,17 @@
compatible = "qcom,apq8064";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@80000000 {
+ reg = <0x80000000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -80,6 +91,19 @@
interrupts = <1 10 0x304>;
};
+ sfpb_mutex: hwmutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+
+ hwlocks = <&sfpb_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -156,6 +180,11 @@
};
};
+ sfpb_wrapper_mutex: syscon@1200000 {
+ compatible = "syscon";
+ reg = <0x01200000 0x8000>;
+ };
+
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
2.4.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 2/4] ARM: dts: qcom: apq8064: Declare all pm8921 regulators
2015-10-22 18:13 [PATCH 0/4] Sony Xperia Z dts Bjorn Andersson
2015-10-22 18:13 ` [PATCH 1/4] ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes Bjorn Andersson
@ 2015-10-22 18:13 ` Bjorn Andersson
2015-10-22 18:13 ` [PATCH 3/4] ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node Bjorn Andersson
2015-10-22 18:13 ` [PATCH 4/4] ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2015-10-22 18:13 UTC (permalink / raw)
To: Andy Gross
Cc: Srinivas Kandagatla, John Stultz, devicetree, linux-arm-kernel,
linux-arm-msm, linux-kernel
Consolidate all labeling of regulators into the core 8064 dtsi file to
make them available from all other dts files.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++-----
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 20 ++++++-------
arch/arm/boot/dts/qcom-apq8064.dtsi | 46 +++++++++++++++++++++++++++++
3 files changed, 64 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 03784f1366e5..21095dad7741 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -54,7 +54,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -62,43 +62,43 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608b6d50..f40e93f09673 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -64,7 +64,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -72,55 +72,55 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l6: l6 {
+ l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- pm8921_lvs1: lvs1 {
+ lvs1 {
bias-pull-down;
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1b64723bd8a0..1bc6c4039dea 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -473,9 +473,55 @@
regulators {
compatible = "qcom,rpm-pm8921-regulators";
+ pm8921_s1: s1 {};
+ pm8921_s2: s2 {};
+ pm8921_s3: s3 {};
+ pm8921_s4: s4 {};
+ pm8921_s7: s7 {};
+ pm8921_s8: s8 {};
+
+ pm8921_l1: l1 {};
+ pm8921_l2: l2 {};
+ pm8921_l3: l3 {};
+ pm8921_l4: l4 {};
+ pm8921_l5: l5 {};
+ pm8921_l6: l6 {};
+ pm8921_l7: l7 {};
+ pm8921_l8: l8 {};
+ pm8921_l9: l9 {};
+ pm8921_l10: l10 {};
+ pm8921_l11: l11 {};
+ pm8921_l12: l12 {};
+ pm8921_l14: l14 {};
+ pm8921_l15: l15 {};
+ pm8921_l16: l16 {};
+ pm8921_l17: l17 {};
+ pm8921_l18: l18 {};
+ pm8921_l21: l21 {};
+ pm8921_l22: l22 {};
+ pm8921_l23: l23 {};
+ pm8921_l24: l24 {};
+ pm8921_l25: l25 {};
+ pm8921_l26: l26 {};
+ pm8921_l27: l27 {};
+ pm8921_l28: l28 {};
+ pm8921_l29: l29 {};
+
+ pm8921_lvs1: lvs1 {};
+ pm8921_lvs2: lvs2 {};
+ pm8921_lvs3: lvs3 {};
+ pm8921_lvs4: lvs4 {};
+ pm8921_lvs5: lvs5 {};
+ pm8921_lvs6: lvs6 {};
+ pm8921_lvs7: lvs7 {};
+
+ pm8921_usb_switch: usb-switch {};
+
pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
+
+ pm8921_ncp: ncp {};
};
};
--
2.4.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 3/4] ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
2015-10-22 18:13 [PATCH 0/4] Sony Xperia Z dts Bjorn Andersson
2015-10-22 18:13 ` [PATCH 1/4] ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes Bjorn Andersson
2015-10-22 18:13 ` [PATCH 2/4] ARM: dts: qcom: apq8064: Declare all pm8921 regulators Bjorn Andersson
@ 2015-10-22 18:13 ` Bjorn Andersson
2015-10-22 18:13 ` [PATCH 4/4] ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2015-10-22 18:13 UTC (permalink / raw)
To: Andy Gross
Cc: Srinivas Kandagatla, John Stultz, devicetree, linux-arm-kernel,
linux-arm-msm, linux-kernel
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1bc6c4039dea..fa3053c14532 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -320,6 +320,28 @@
};
};
+ gsbi5: gsbi@1a200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x1a200000 0x03>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi5_serial: serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x100>,
+ <0x1a200000 0x03>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
gsbi6: gsbi@16500000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
--
2.4.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 4/4] ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts
2015-10-22 18:13 [PATCH 0/4] Sony Xperia Z dts Bjorn Andersson
` (2 preceding siblings ...)
2015-10-22 18:13 ` [PATCH 3/4] ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node Bjorn Andersson
@ 2015-10-22 18:13 ` Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2015-10-22 18:13 UTC (permalink / raw)
To: Andy Gross
Cc: Srinivas Kandagatla, John Stultz, devicetree, linux-arm-kernel,
linux-arm-msm, linux-kernel
This introduces initial support for the Sony Xperia Z smartphone, including
support for UART, MMC, USB gadget and physical buttons.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 436 +++++++++++++++++++++
2 files changed, 437 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7d3e495c0897..42a9370d4ad1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -500,6 +500,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
+ qcom-apq8064-sony-xperia-yuga.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000000..06b3c76c3e41
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z";
+ compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ soc {
+ pinctrl@800000 {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+ rx {
+ pins = "gpio52";
+ function = "gsbi5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio51";
+ function = "gsbi5";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdcc1_pin_a: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_pin_a: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ pins = "gpio26";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+
+ rpm@108000 {
+ regulators {
+ vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vin_lvs_1_3_6-supply = <&pm8921_s4>;
+ vin_lvs_4_5_7-supply = <&pm8921_s4>;
+ vin_ncp-supply = <&pm8921_l6>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_l24-supply = <&pm8921_s1>;
+ vin_l25-supply = <&pm8921_s1>;
+ vin_l27-supply = <&pm8921_s7>;
+ vin_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ s8 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+
+ /* PMOS LDO */
+ l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ bias-pull-down;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ bias-pull-down;
+ };
+
+ l11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l22 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+
+ l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ l27 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l29 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ lvs1 {
+ bias-pull-down;
+ };
+
+ lvs2 {
+ bias-pull-down;
+ };
+
+ lvs3 {
+ bias-pull-down;
+ };
+
+ lvs4 {
+ bias-pull-down;
+ };
+
+ lvs5 {
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+
+ lvs7 {
+ bias-pull-down;
+ };
+
+ usb-switch {};
+
+ hdmi-switch {};
+
+ ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ gpio_keys_pin_a: gpio-keys-pin-active {
+ pins = "gpio3", "gpio4", "gpio29", "gpio35";
+ function = "normal";
+
+ bias-pull-up;
+ drive-push-pull;
+ input-enable;
+ power-source = <2>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <0>;
+ };
+ };
+ };
+ };
+
+ phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ gsbi@1a200000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@1a240000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_pin_a>;
+ };
+ };
+
+ amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pin_a>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l6>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ };
+ };
+ };
+};
--
2.4.2
^ permalink raw reply [flat|nested] 5+ messages in thread