mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Josh Wu <josh.wu@atmel.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Josh Wu <josh.wu@atmel.com>,
	Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/5] media: atmel-isi: add code to setup correct resolution for preview path
Date: Tue, 3 Nov 2015 13:45:10 +0800	[thread overview]
Message-ID: <1446529512-19109-4-git-send-email-josh.wu@atmel.com> (raw)
In-Reply-To: <1446529512-19109-1-git-send-email-josh.wu@atmel.com>

Not like codec path, preview path can do downsampling, so we should setup
a extra preview width, height for it.

This patch add preview resolution setup without down sampling. So currently
preview path will output same size as sensor output size.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

Changes in v2: None

 drivers/media/platform/soc_camera/atmel-isi.c | 12 +++++++++++-
 drivers/media/platform/soc_camera/atmel-isi.h | 10 ++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 24501a4..ae82068 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -131,7 +131,7 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
 static void configure_geometry(struct atmel_isi *isi, u32 width,
 		u32 height, const struct soc_camera_format_xlate *xlate)
 {
-	u32 cfg2;
+	u32 cfg2, psize;
 
 	/* According to sensor's output format to set cfg2 */
 	switch (xlate->code) {
@@ -159,6 +159,16 @@ static void configure_geometry(struct atmel_isi *isi, u32 width,
 	cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
 			& ISI_CFG2_IM_VSIZE_MASK;
 	isi_writel(isi, ISI_CFG2, cfg2);
+
+	/* No down sampling, preview size equal to sensor output size */
+	psize = ((width - 1) << ISI_PSIZE_PREV_HSIZE_OFFSET) &
+		ISI_PSIZE_PREV_HSIZE_MASK;
+	psize |= ((height - 1) << ISI_PSIZE_PREV_VSIZE_OFFSET) &
+		ISI_PSIZE_PREV_VSIZE_MASK;
+	isi_writel(isi, ISI_PSIZE, psize);
+	isi_writel(isi, ISI_PDECF, ISI_PDECF_NO_SAMPLING);
+
+	return;
 }
 
 static bool is_supported(struct soc_camera_device *icd,
diff --git a/drivers/media/platform/soc_camera/atmel-isi.h b/drivers/media/platform/soc_camera/atmel-isi.h
index 5acc771..0acb32a 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.h
+++ b/drivers/media/platform/soc_camera/atmel-isi.h
@@ -79,6 +79,16 @@
 #define ISI_CFG2_IM_VSIZE_MASK		(0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
 #define ISI_CFG2_IM_HSIZE_MASK		(0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
 
+/* Bitfields in PSIZE */
+#define ISI_PSIZE_PREV_VSIZE_OFFSET	0
+#define ISI_PSIZE_PREV_HSIZE_OFFSET	16
+#define ISI_PSIZE_PREV_VSIZE_MASK	(0x3FF << ISI_PSIZE_PREV_VSIZE_OFFSET)
+#define ISI_PSIZE_PREV_HSIZE_MASK	(0x3FF << ISI_PSIZE_PREV_HSIZE_OFFSET)
+
+/* Bitfields in PDECF */
+#define ISI_PDECF_DEC_FACTOR_MASK	(0xFF << 0)
+#define	ISI_PDECF_NO_SAMPLING		(16)
+
 /* Bitfields in CTRL */
 /* Also using in SR(ISI_V2) */
 #define ISI_CTRL_EN				(1 << 0)
-- 
1.9.1


  parent reply	other threads:[~2015-11-03  5:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-03  5:45 [PATCH v2 0/5] media: atmel-isi: enable preview path to output RGB565 format Josh Wu
2015-11-03  5:45 ` [PATCH v2 1/5] media: atmel-isi: correct yuv swap according to different sensor outputs Josh Wu
2015-11-03  5:45 ` [PATCH v2 2/5] media: atmel-isi: prepare for the support of preview path Josh Wu
2015-11-03  5:45 ` Josh Wu [this message]
2015-11-03  5:45 ` [PATCH v2 4/5] media: atmel-isi: setup YCC_SWAP correctly when using " Josh Wu
2015-11-03  5:45 ` [PATCH v2 5/5] media: atmel-isi: support RGB565 output when sensor output YUV formats Josh Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446529512-19109-4-git-send-email-josh.wu@atmel.com \
    --to=josh.wu@atmel.com \
    --cc=g.liakhovetski@gmx.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@osg.samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®