From: Josh Wu <josh.wu@atmel.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Josh Wu <josh.wu@atmel.com>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 5/5] media: atmel-isi: support RGB565 output when sensor output YUV formats
Date: Tue, 3 Nov 2015 13:45:12 +0800 [thread overview]
Message-ID: <1446529512-19109-6-git-send-email-josh.wu@atmel.com> (raw)
In-Reply-To: <1446529512-19109-1-git-send-email-josh.wu@atmel.com>
This patch enable Atmel ISI preview path to convert the YUV to RGB format.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
Changes in v2:
- According to Guennadi's suggestion, remove the is_output_rgb() function
which only used once. Also move the code into the for loop.
drivers/media/platform/soc_camera/atmel-isi.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 826d04e..8abeeeb 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -146,6 +146,10 @@ static void configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, const struct soc_camera_format_xlate *xlate)
{
u32 cfg2, psize;
+ u32 fourcc = xlate->host_fmt->fourcc;
+
+ isi->enable_preview_path = (fourcc == V4L2_PIX_FMT_RGB565 ||
+ fourcc == V4L2_PIX_FMT_RGB32);
/* According to sensor's output format to set cfg2 */
switch (xlate->code) {
@@ -195,8 +199,9 @@ static bool is_supported(struct soc_camera_device *icd,
case V4L2_PIX_FMT_UYVY:
case V4L2_PIX_FMT_YVYU:
case V4L2_PIX_FMT_VYUY:
+ /* RGB */
+ case V4L2_PIX_FMT_RGB565:
return true;
- /* RGB, TODO */
default:
return false;
}
@@ -682,6 +687,14 @@ static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
.order = SOC_MBUS_ORDER_LE,
.layout = SOC_MBUS_LAYOUT_PACKED,
},
+ {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .name = "RGB565",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_LE,
+ .layout = SOC_MBUS_LAYOUT_PACKED,
+ },
};
/* This will be corrected as we get more formats */
@@ -738,7 +751,7 @@ static int isi_camera_get_formats(struct soc_camera_device *icd,
struct soc_camera_format_xlate *xlate)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int formats = 0, ret;
+ int formats = 0, ret, i, n;
/* sensor format */
struct v4l2_subdev_mbus_code_enum code = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
@@ -772,11 +785,11 @@ static int isi_camera_get_formats(struct soc_camera_device *icd,
case MEDIA_BUS_FMT_VYUY8_2X8:
case MEDIA_BUS_FMT_YUYV8_2X8:
case MEDIA_BUS_FMT_YVYU8_2X8:
- formats++;
- if (xlate) {
- xlate->host_fmt = &isi_camera_formats[0];
+ n = ARRAY_SIZE(isi_camera_formats);
+ formats += n;
+ for (i = 0; xlate && i < n; i++, xlate++) {
+ xlate->host_fmt = &isi_camera_formats[i];
xlate->code = code.code;
- xlate++;
dev_dbg(icd->parent, "Providing format %s using code %d\n",
isi_camera_formats[0].name, code.code);
}
--
1.9.1
prev parent reply other threads:[~2015-11-03 5:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 5:45 [PATCH v2 0/5] media: atmel-isi: enable preview path to output RGB565 format Josh Wu
2015-11-03 5:45 ` [PATCH v2 1/5] media: atmel-isi: correct yuv swap according to different sensor outputs Josh Wu
2015-11-03 5:45 ` [PATCH v2 2/5] media: atmel-isi: prepare for the support of preview path Josh Wu
2015-11-03 5:45 ` [PATCH v2 3/5] media: atmel-isi: add code to setup correct resolution for " Josh Wu
2015-11-03 5:45 ` [PATCH v2 4/5] media: atmel-isi: setup YCC_SWAP correctly when using " Josh Wu
2015-11-03 5:45 ` Josh Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446529512-19109-6-git-send-email-josh.wu@atmel.com \
--to=josh.wu@atmel.com \
--cc=g.liakhovetski@gmx.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®