Re: [PATCH V2] SKL intel_pstate update MSR values when changing governors

[Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>]

On Tue, 2015-11-17 at 17:58 -0800, Alexandra Yates wrote:
> From: root <root@skl-s-fedora22.jf.intel.com>
You need to fix the git config ...
The change itself is OK.

Thanks,
Srinivas
> 
> When changing from powersave to performance governors
> Intel_pstate fails to update the MSR values that reflect the
> max_perf_pct to 100%. For instance in SKL reading rdmsr 0x774:
> 
> Governor 	MSR			max_perf_pct
> =========	========		============
> Powersave 	80002808		100%
> Powersave	80002008		80%
> Performance	80002028 [error]	100%
> Performance	80002828 [expected]	100%
> 
> The line label [error] shows the culprit. At this point the MSR
> should reflect the max_perf_pct that is 100%, that corresponds
> to MSR 80002828 as shown on the next line of the example. Which
> is the maximum performance for the Performance governor.
> Instead it holds back the MSR value previously set by the
> Powersave, in this case 80002028.
> 
> This patch allows the system to print the correct MSR value
> 80002828 that corresponds to the 100% max_perf_pct when changing
> from powersave to performance governors.
> 
> For more information on the MSR values for SKL please visit
> ISDM under Managing HWP.
> 
> Signed-off-by: root <root@skl-s-fedora22.jf.intel.com>
> ---
>  drivers/cpufreq/intel_pstate.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
> index 2e31d09..0eeb7da 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -1242,6 +1242,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
>  	    policy->max >= policy->cpuinfo.max_freq) {
>  		pr_debug("intel_pstate: set performance\n");
>  		limits = &performance_limits;
> +		if (hwp_active)
> +			intel_pstate_hwp_set();
>  		return 0;
>  	}
>