From: Kyeongdon Kim <kyeongdon.kim@lge.com>
To: <minchan@kernel.org>, <ngupta@vflare.org>,
<sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org, Kyeongdon Kim <kyeongdon.kim@lge.com>
Subject: [PATCH v3] zram: try vmalloc() after kmalloc()
Date: Mon, 23 Nov 2015 15:21:15 +0900 [thread overview]
Message-ID: <1448259675-29888-1-git-send-email-kyeongdon.kim@lge.com> (raw)
When we're using LZ4 multi compression streams for zram swap,
we found out page allocation failure message in system running test.
That was not only once, but a few(2 - 5 times per test).
Also, some failure cases were continually occurring to try allocation
order 3.
In order to make parallel compression private data, we should call
kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order
2/3 size memory to allocate in that time, page allocation fails.
This patch makes to use vmalloc() as fallback of kmalloc(), this
prevents page alloc failure warning.
After using this, we never found warning message in running test, also
It could reduce process startup latency about 60-120ms in each case.
For reference a call trace :
Binder_1: page allocation failure: order:3, mode:0x10c0d0
CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20
Call trace:
[<ffffffc0002069c8>] dump_backtrace+0x0/0x270
[<ffffffc000206c48>] show_stack+0x10/0x1c
[<ffffffc000cb51c8>] dump_stack+0x1c/0x28
[<ffffffc0002bbfc8>] warn_alloc_failed+0xfc/0x11c
[<ffffffc0002bf518>] __alloc_pages_nodemask+0x724/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0002ed6a4>] kmalloc_order_trace+0x38/0xd8
[<ffffffc0005d9738>] zcomp_lz4_create+0x2c/0x38
[<ffffffc0005d78f0>] zcomp_strm_alloc+0x34/0x78
[<ffffffc0005d7a58>] zcomp_strm_multi_find+0x124/0x1ec
[<ffffffc0005d7c14>] zcomp_strm_find+0xc/0x18
[<ffffffc0005d8fa0>] zram_bvec_rw+0x2fc/0x780
[<ffffffc0005d9680>] zram_make_request+0x25c/0x2d4
[<ffffffc00040f8ac>] generic_make_request+0x80/0xbc
[<ffffffc00040f98c>] submit_bio+0xa4/0x15c
[<ffffffc0002e8bb0>] __swap_writepage+0x218/0x230
[<ffffffc0002e8c04>] swap_writepage+0x3c/0x4c
[<ffffffc0002c7384>] shrink_page_list+0x51c/0x8d0
[<ffffffc0002c7e88>] shrink_inactive_list+0x3f8/0x60c
[<ffffffc0002c86c8>] shrink_lruvec+0x33c/0x4cc
[<ffffffc0002c8894>] shrink_zone+0x3c/0x100
[<ffffffc0002c8c10>] try_to_free_pages+0x2b8/0x54c
[<ffffffc0002bf308>] __alloc_pages_nodemask+0x514/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0003446cc>] proc_info_read+0x50/0xe4
[<ffffffc0002f5204>] vfs_read+0xa0/0x12c
[<ffffffc0002f59c8>] SyS_read+0x44/0x74
DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB
0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
---
drivers/block/zram/zcomp_lz4.c | 12 ++++++++++--
drivers/block/zram/zcomp_lzo.c | 12 ++++++++++--
2 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/block/zram/zcomp_lz4.c b/drivers/block/zram/zcomp_lz4.c
index f2afb7e..0cc4799 100644
--- a/drivers/block/zram/zcomp_lz4.c
+++ b/drivers/block/zram/zcomp_lz4.c
@@ -10,17 +10,25 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/lz4.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include "zcomp_lz4.h"
static void *zcomp_lz4_create(void)
{
- return kzalloc(LZ4_MEM_COMPRESS, GFP_KERNEL);
+ void *ret;
+
+ ret = kzalloc(LZ4_MEM_COMPRESS,
+ __GFP_NORETRY|__GFP_NOWARN|__GFP_NOMEMALLOC);
+ if (!ret)
+ ret = vzalloc(LZ4_MEM_COMPRESS);
+ return ret;
}
static void zcomp_lz4_destroy(void *private)
{
- kfree(private);
+ kvfree(private);
}
static int zcomp_lz4_compress(const unsigned char *src, unsigned char *dst,
diff --git a/drivers/block/zram/zcomp_lzo.c b/drivers/block/zram/zcomp_lzo.c
index da1bc47..59b8aa4 100644
--- a/drivers/block/zram/zcomp_lzo.c
+++ b/drivers/block/zram/zcomp_lzo.c
@@ -10,17 +10,25 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/lzo.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include "zcomp_lzo.h"
static void *lzo_create(void)
{
- return kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
+ void *ret;
+
+ ret = kzalloc(LZO1X_MEM_COMPRESS,
+ __GFP_NORETRY|__GFP_NOWARN|__GFP_NOMEMALLOC);
+ if (!ret)
+ ret = vzalloc(LZO1X_MEM_COMPRESS);
+ return ret;
}
static void lzo_destroy(void *private)
{
- kfree(private);
+ kvfree(private);
}
static int lzo_compress(const unsigned char *src, unsigned char *dst,
--
1.8.2
next reply other threads:[~2015-11-23 6:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-23 6:21 Kyeongdon Kim [this message]
2015-11-23 6:35 ` Minchan Kim
2015-11-23 7:26 ` Sergey Senozhatsky
2015-11-23 22:52 ` Andrew Morton
2015-11-23 23:28 ` Minchan Kim
2015-11-23 23:40 ` Andrew Morton
2015-11-24 0:35 ` Minchan Kim
2015-11-24 1:06 ` Sergey Senozhatsky
2015-11-24 3:56 ` Minchan Kim
2015-11-24 8:09 ` Kyeongdon Kim
2015-11-24 8:15 ` Minchan Kim
2015-11-24 7:56 ` Kyeongdon Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448259675-29888-1-git-send-email-kyeongdon.kim@lge.com \
--to=kyeongdon.kim@lge.com \
--cc=linux-kernel@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
--cc=sergey.senozhatsky.work@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®