From: Andre Przywara <andre.przywara@arm.com>
To: rob.herring@linaro.org, Pawel Moll <pawel.moll@arm.com>,
ijc+devicetree@hellion.org.uk, marc.zyngier@arm.com
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v2 1/4] arm64: dts: prepare foundation-v8.dts to cope with GICv3
Date: Tue, 15 Dec 2015 13:36:35 +0000 [thread overview]
Message-ID: <1450186598-24504-2-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1450186598-24504-1-git-send-email-andre.przywara@arm.com>
To prepare the ARM foundation model to support GICv3, we adjust
the #address-cells property of the current GICv2 node to be
compatible with the two cells required for GICv3 later.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/boot/dts/arm/foundation-v8.dts | 88 +++++++++++++++----------------
1 file changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 4eac8dc..3c5595d 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -75,7 +75,7 @@
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
+ #address-cells = <2>;
interrupt-controller;
reg = <0x0 0x2c001000 0 0x1000>,
<0x0 0x2c002000 0 0x1000>,
@@ -116,49 +116,49 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
+ interrupt-map = <0 0 0 &gic 0 0 0 0 4>,
+ <0 0 1 &gic 0 0 0 1 4>,
+ <0 0 2 &gic 0 0 0 2 4>,
+ <0 0 3 &gic 0 0 0 3 4>,
+ <0 0 4 &gic 0 0 0 4 4>,
+ <0 0 5 &gic 0 0 0 5 4>,
+ <0 0 6 &gic 0 0 0 6 4>,
+ <0 0 7 &gic 0 0 0 7 4>,
+ <0 0 8 &gic 0 0 0 8 4>,
+ <0 0 9 &gic 0 0 0 9 4>,
+ <0 0 10 &gic 0 0 0 10 4>,
+ <0 0 11 &gic 0 0 0 11 4>,
+ <0 0 12 &gic 0 0 0 12 4>,
+ <0 0 13 &gic 0 0 0 13 4>,
+ <0 0 14 &gic 0 0 0 14 4>,
+ <0 0 15 &gic 0 0 0 15 4>,
+ <0 0 16 &gic 0 0 0 16 4>,
+ <0 0 17 &gic 0 0 0 17 4>,
+ <0 0 18 &gic 0 0 0 18 4>,
+ <0 0 19 &gic 0 0 0 19 4>,
+ <0 0 20 &gic 0 0 0 20 4>,
+ <0 0 21 &gic 0 0 0 21 4>,
+ <0 0 22 &gic 0 0 0 22 4>,
+ <0 0 23 &gic 0 0 0 23 4>,
+ <0 0 24 &gic 0 0 0 24 4>,
+ <0 0 25 &gic 0 0 0 25 4>,
+ <0 0 26 &gic 0 0 0 26 4>,
+ <0 0 27 &gic 0 0 0 27 4>,
+ <0 0 28 &gic 0 0 0 28 4>,
+ <0 0 29 &gic 0 0 0 29 4>,
+ <0 0 30 &gic 0 0 0 30 4>,
+ <0 0 31 &gic 0 0 0 31 4>,
+ <0 0 32 &gic 0 0 0 32 4>,
+ <0 0 33 &gic 0 0 0 33 4>,
+ <0 0 34 &gic 0 0 0 34 4>,
+ <0 0 35 &gic 0 0 0 35 4>,
+ <0 0 36 &gic 0 0 0 36 4>,
+ <0 0 37 &gic 0 0 0 37 4>,
+ <0 0 38 &gic 0 0 0 38 4>,
+ <0 0 39 &gic 0 0 0 39 4>,
+ <0 0 40 &gic 0 0 0 40 4>,
+ <0 0 41 &gic 0 0 0 41 4>,
+ <0 0 42 &gic 0 0 0 42 4>;
ethernet@2,02000000 {
compatible = "smsc,lan91c111";
--
2.5.1
next prev parent reply other threads:[~2015-12-15 13:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 13:36 [PATCH v2 0/4] add support for GICv3 on the Foundation model Andre Przywara
2015-12-15 13:36 ` Andre Przywara [this message]
2015-12-15 13:36 ` [PATCH v2 2/4] arm64: dts: Foundation model: increase GICC region to allow EOImode=1 Andre Przywara
2015-12-15 15:52 ` Marc Zyngier
2015-12-15 13:36 ` [PATCH v2 3/4] arm64: dts: split Foundation model dts to put the GIC separately Andre Przywara
2015-12-15 13:36 ` [PATCH v2 4/4] arm64: dts: add .dts for GICv3 Foundation model Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450186598-24504-2-git-send-email-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome