From: Andre Przywara <andre.przywara@arm.com>
To: rob.herring@linaro.org, Pawel Moll <pawel.moll@arm.com>,
ijc+devicetree@hellion.org.uk, marc.zyngier@arm.com
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v2 3/4] arm64: dts: split Foundation model dts to put the GIC separately
Date: Tue, 15 Dec 2015 13:36:37 +0000 [thread overview]
Message-ID: <1450186598-24504-4-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1450186598-24504-1-git-send-email-andre.przywara@arm.com>
The ARMv8 Foundation model can be run with a GICv2 or a GICv3.
To prepare for the GICv3 version of the .dts without code duplication,
move most of the nodes of the existing DT (except the GIC) into an
include file and just keep that include statement and the GIC node in
the current foundation-v8.dts.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/boot/dts/arm/foundation-v8.dts | 223 +--------------------
.../arm/{foundation-v8.dts => foundation-v8.dtsi} | 12 --
2 files changed, 2 insertions(+), 233 deletions(-)
copy arch/arm64/boot/dts/arm/{foundation-v8.dts => foundation-v8.dtsi} (93%)
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 57ad9fe..7116807 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -1,77 +1,12 @@
/*
* ARM Ltd.
*
- * ARMv8 Foundation model DTS
+ * ARMv8 Foundation model DTS (GICv2 configuration)
*/
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
+#include "foundation-v8.dtsi"
/ {
- model = "Foundation-v8A";
- compatible = "arm,foundation-aarch64", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -83,158 +18,4 @@
<0x0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- arm,v2m-memory-map = "rs1";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
-
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 0 0 4>,
- <0 0 1 &gic 0 0 0 1 4>,
- <0 0 2 &gic 0 0 0 2 4>,
- <0 0 3 &gic 0 0 0 3 4>,
- <0 0 4 &gic 0 0 0 4 4>,
- <0 0 5 &gic 0 0 0 5 4>,
- <0 0 6 &gic 0 0 0 6 4>,
- <0 0 7 &gic 0 0 0 7 4>,
- <0 0 8 &gic 0 0 0 8 4>,
- <0 0 9 &gic 0 0 0 9 4>,
- <0 0 10 &gic 0 0 0 10 4>,
- <0 0 11 &gic 0 0 0 11 4>,
- <0 0 12 &gic 0 0 0 12 4>,
- <0 0 13 &gic 0 0 0 13 4>,
- <0 0 14 &gic 0 0 0 14 4>,
- <0 0 15 &gic 0 0 0 15 4>,
- <0 0 16 &gic 0 0 0 16 4>,
- <0 0 17 &gic 0 0 0 17 4>,
- <0 0 18 &gic 0 0 0 18 4>,
- <0 0 19 &gic 0 0 0 19 4>,
- <0 0 20 &gic 0 0 0 20 4>,
- <0 0 21 &gic 0 0 0 21 4>,
- <0 0 22 &gic 0 0 0 22 4>,
- <0 0 23 &gic 0 0 0 23 4>,
- <0 0 24 &gic 0 0 0 24 4>,
- <0 0 25 &gic 0 0 0 25 4>,
- <0 0 26 &gic 0 0 0 26 4>,
- <0 0 27 &gic 0 0 0 27 4>,
- <0 0 28 &gic 0 0 0 28 4>,
- <0 0 29 &gic 0 0 0 29 4>,
- <0 0 30 &gic 0 0 0 30 4>,
- <0 0 31 &gic 0 0 0 31 4>,
- <0 0 32 &gic 0 0 0 32 4>,
- <0 0 33 &gic 0 0 0 33 4>,
- <0 0 34 &gic 0 0 0 34 4>,
- <0 0 35 &gic 0 0 0 35 4>,
- <0 0 36 &gic 0 0 0 36 4>,
- <0 0 37 &gic 0 0 0 37 4>,
- <0 0 38 &gic 0 0 0 38 4>,
- <0 0 39 &gic 0 0 0 39 4>,
- <0 0 40 &gic 0 0 0 40 4>,
- <0 0 41 &gic 0 0 0 41 4>,
- <0 0 42 &gic 0 0 0 42 4>;
-
- ethernet@2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga@3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg@010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- };
-
- v2m_serial0: uart@090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart@0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart@0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart@0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- virtio_block@0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
- };
};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
similarity index 93%
copy from arch/arm64/boot/dts/arm/foundation-v8.dts
copy to arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 57ad9fe..9314f39 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -72,18 +72,6 @@
<0x00000008 0x80000000 0 0x80000000>;
};
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x2000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf08>,
--
2.5.1
next prev parent reply other threads:[~2015-12-15 13:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 13:36 [PATCH v2 0/4] add support for GICv3 on the Foundation model Andre Przywara
2015-12-15 13:36 ` [PATCH v2 1/4] arm64: dts: prepare foundation-v8.dts to cope with GICv3 Andre Przywara
2015-12-15 13:36 ` [PATCH v2 2/4] arm64: dts: Foundation model: increase GICC region to allow EOImode=1 Andre Przywara
2015-12-15 15:52 ` Marc Zyngier
2015-12-15 13:36 ` Andre Przywara [this message]
2015-12-15 13:36 ` [PATCH v2 4/4] arm64: dts: add .dts for GICv3 Foundation model Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450186598-24504-4-git-send-email-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome