From: Chen Feng <puck.chen@hisilicon.com>
To: <lee.jones@linaro.org>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <linux-kernel@vger.kernel.org>,
<puck.chen@hisilicon.com>, <yudongbin@hisilicon.com>,
<saberlily.xia@hisilicon.com>, <suzhuangluan@hisilicon.com>,
<kong.kongxinwei@hisilicon.com>, <xuyiping@hisilicon.com>,
<z.liuxinliang@hisilicon.com>, <puck.chenfeng@gmail.com>,
<weidong2@hisilicon.com>, <w.f@huawei.com>
Cc: <qijiwen@hisilicon.com>, <peter.panshilin@hisilicon.com>,
<dan.zhao@hisilicon.com>, <linuxarm@huawei.com>,
<liguozhu@hisilicon.com>, <shimingxing@hisilicon.com>,
<albert.lubing@hisilicon.com>, <oliver.fu@hisilicon.com>,
<haojian.zhuang@linaro.org>
Subject: [PATCH v4 5/5] hisilicon/dts: Add hi655x pmic dts node
Date: Mon, 4 Jan 2016 20:27:52 +0800 [thread overview]
Message-ID: <1451910472-126417-6-git-send-email-puck.chen@hisilicon.com> (raw)
In-Reply-To: <1451910472-126417-1-git-send-email-puck.chen@hisilicon.com>
Add the mfd hi655x dts node and regulator support
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 5 ++
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 99 ++++++++++++++++++++++++++
2 files changed, 104 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 8d43a0f..f714ac7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -31,4 +31,9 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
+
+};
+
+&pmic {
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 82d2488..48966a5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -208,5 +208,104 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ pmic: pmic@f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ reg = <0x0 0xf8000000 0x0 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ pmic-gpios = <&gpio1 2 0>;
+ status = "disabled";
+
+ ldo2: ldo2@a21 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-valid-modes-mask = <0x02>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo7: ldo7@a26 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-valid-modes-mask = <0x0a>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo10: ldo10@a29 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-valid-modes-mask = <0x0a>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo13: ldo13@a32 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo13";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo14: ldo14@a33 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo14";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo15: ldo15@a34 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo17: ldo17@a36 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo19: ldo19@a38 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo21: ldo21@a40 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo21";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-valid-modes-mask = <0x02>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo22: ldo22@a41 {
+ compatible = "hisilicon,hi655x-regulator";
+ regulator-name = "ldo22";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-valid-modes-mask = <0x02>;
+ regulator-enable-ramp-delay = <120>;
+ };
+ };
};
};
--
1.9.1
prev parent reply other threads:[~2016-01-04 12:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 12:27 [PATCH v4 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng
2016-01-04 12:27 ` [PATCH v4 1/5] doc: bindings: Add document for mfd hi665x PMIC Chen Feng
2016-01-04 12:27 ` [PATCH v4 2/5] doc: bindings: Document for hi655x regulator driver Chen Feng
2016-01-05 15:47 ` Mark Brown
2016-01-07 3:36 ` chenfeng
2016-01-04 12:27 ` [PATCH v4 3/5] mfd: hi655x: Add hi665x pmic driver Chen Feng
2016-01-04 18:45 ` kbuild test robot
2016-01-04 20:02 ` kbuild test robot
2016-01-11 5:49 ` Lee Jones
2016-01-04 12:27 ` [PATCH v4 4/5] regulator: add regulator driver of hi655x pmic Chen Feng
2016-01-05 15:44 ` Mark Brown
2016-01-07 3:35 ` chenfeng
2016-01-04 12:27 ` Chen Feng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451910472-126417-6-git-send-email-puck.chen@hisilicon.com \
--to=puck.chen@hisilicon.com \
--cc=albert.lubing@hisilicon.com \
--cc=broonie@kernel.org \
--cc=dan.zhao@hisilicon.com \
--cc=haojian.zhuang@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=oliver.fu@hisilicon.com \
--cc=peter.panshilin@hisilicon.com \
--cc=puck.chenfeng@gmail.com \
--cc=qijiwen@hisilicon.com \
--cc=saberlily.xia@hisilicon.com \
--cc=shimingxing@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=w.f@huawei.com \
--cc=weidong2@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=yudongbin@hisilicon.com \
--cc=z.liuxinliang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®