From: Chris Metcalf <cmetcalf@ezchip.com>
To: Gilad Ben Yossef <giladb@ezchip.com>,
Steven Rostedt <rostedt@goodmis.org>,
Ingo Molnar <mingo@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Andrew Morton <akpm@linux-foundation.org>,
"Rik van Riel" <riel@redhat.com>, Tejun Heo <tj@kernel.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
Christoph Lameter <cl@linux.com>,
Viresh Kumar <viresh.kumar@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Andy Lutomirski <luto@amacapital.net>,
<linux-kernel@vger.kernel.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Subject: [PATCH v9 12/13] arch/tile: enable task isolation functionality
Date: Mon, 4 Jan 2016 14:34:50 -0500 [thread overview]
Message-ID: <1451936091-29247-13-git-send-email-cmetcalf@ezchip.com> (raw)
In-Reply-To: <1451936091-29247-1-git-send-email-cmetcalf@ezchip.com>
We add the necessary call to task_isolation_enter() in the
prepare_exit_to_usermode() routine. We already unconditionally
call into this routine if TIF_NOHZ is set, since that's where
we do the user_enter() call.
We add calls to task_isolation_check_exception() in places
where exceptions may not generate signals to the application.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
---
arch/tile/kernel/process.c | 6 +++++-
arch/tile/kernel/ptrace.c | 6 ++++++
arch/tile/kernel/single_step.c | 5 +++++
arch/tile/kernel/smp.c | 26 ++++++++++++++------------
arch/tile/kernel/unaligned.c | 3 +++
arch/tile/mm/fault.c | 3 +++
arch/tile/mm/homecache.c | 2 ++
7 files changed, 38 insertions(+), 13 deletions(-)
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index b5f30d376ce1..832febfd65df 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -29,6 +29,7 @@
#include <linux/signal.h>
#include <linux/delay.h>
#include <linux/context_tracking.h>
+#include <linux/isolation.h>
#include <asm/stack.h>
#include <asm/switch_to.h>
#include <asm/homecache.h>
@@ -495,10 +496,13 @@ void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags)
tracehook_notify_resume(regs);
}
+ task_isolation_enter();
+
local_irq_disable();
thread_info_flags = READ_ONCE(current_thread_info()->flags);
- } while (thread_info_flags & _TIF_WORK_MASK);
+ } while ((thread_info_flags & _TIF_WORK_MASK) ||
+ !task_isolation_ready());
if (thread_info_flags & _TIF_SINGLESTEP) {
single_step_once(regs);
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
index 54e7b723db99..f76f2d8b8923 100644
--- a/arch/tile/kernel/ptrace.c
+++ b/arch/tile/kernel/ptrace.c
@@ -23,6 +23,7 @@
#include <linux/elf.h>
#include <linux/tracehook.h>
#include <linux/context_tracking.h>
+#include <linux/isolation.h>
#include <asm/traps.h>
#include <arch/chip.h>
@@ -255,6 +256,11 @@ int do_syscall_trace_enter(struct pt_regs *regs)
{
u32 work = ACCESS_ONCE(current_thread_info()->flags);
+ if (work & _TIF_NOHZ) {
+ if (task_isolation_check_syscall(regs->regs[TREG_SYSCALL_NR]))
+ return -1;
+ }
+
if (secure_computing() == -1)
return -1;
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 862973074bf9..ba01eacde7a3 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -23,6 +23,7 @@
#include <linux/types.h>
#include <linux/err.h>
#include <linux/prctl.h>
+#include <linux/isolation.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
@@ -320,6 +321,8 @@ void single_step_once(struct pt_regs *regs)
int size = 0, sign_ext = 0; /* happy compiler */
int align_ctl;
+ task_isolation_check_exception("single step at %#lx", regs->pc);
+
align_ctl = unaligned_fixup;
switch (task_thread_info(current)->align_ctl) {
case PR_UNALIGN_NOPRINT:
@@ -767,6 +770,8 @@ void single_step_once(struct pt_regs *regs)
unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc);
unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K);
+ task_isolation_check_exception("single step at %#lx", regs->pc);
+
*ss_pc = regs->pc;
control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK;
control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK;
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 07e3ff5cc740..7298d68d4584 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/irq_work.h>
#include <linux/module.h>
+#include <linux/isolation.h>
#include <asm/cacheflush.h>
#include <asm/homecache.h>
@@ -181,10 +182,11 @@ void flush_icache_range(unsigned long start, unsigned long end)
struct ipi_flush flush = { start, end };
/* If invoked with irqs disabled, we can not issue IPIs. */
- if (irqs_disabled())
+ if (irqs_disabled()) {
+ task_isolation_debug_cpumask(&task_isolation_map);
flush_remote(0, HV_FLUSH_EVICT_L1I, NULL, 0, 0, 0,
NULL, NULL, 0);
- else {
+ } else {
preempt_disable();
on_each_cpu(ipi_flush_icache_range, &flush, 1);
preempt_enable();
@@ -258,10 +260,8 @@ void __init ipi_init(void)
#if CHIP_HAS_IPI()
-void smp_send_reschedule(int cpu)
+static void __smp_send_reschedule(int cpu)
{
- WARN_ON(cpu_is_offline(cpu));
-
/*
* We just want to do an MMIO store. The traditional writeq()
* functions aren't really correct here, since they're always
@@ -273,15 +273,17 @@ void smp_send_reschedule(int cpu)
#else
-void smp_send_reschedule(int cpu)
+static void __smp_send_reschedule(int cpu)
{
- HV_Coord coord;
-
- WARN_ON(cpu_is_offline(cpu));
-
- coord.y = cpu_y(cpu);
- coord.x = cpu_x(cpu);
+ HV_Coord coord = { .y = cpu_y(cpu), .x = cpu_x(cpu) };
hv_trigger_ipi(coord, IRQ_RESCHEDULE);
}
#endif /* CHIP_HAS_IPI() */
+
+void smp_send_reschedule(int cpu)
+{
+ WARN_ON(cpu_is_offline(cpu));
+ task_isolation_debug(cpu);
+ __smp_send_reschedule(cpu);
+}
diff --git a/arch/tile/kernel/unaligned.c b/arch/tile/kernel/unaligned.c
index 0db5f7c9d9e5..b1e229a1ff62 100644
--- a/arch/tile/kernel/unaligned.c
+++ b/arch/tile/kernel/unaligned.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/compat.h>
#include <linux/prctl.h>
+#include <linux/isolation.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
@@ -1545,6 +1546,8 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
return;
}
+ task_isolation_check_exception("unaligned JIT at %#lx", regs->pc);
+
if (!info->unalign_jit_base) {
void __user *user_page;
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 26734214818c..1dee18d3ffbd 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -35,6 +35,7 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
+#include <linux/isolation.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
@@ -844,6 +845,8 @@ static inline void __do_page_fault(struct pt_regs *regs, int fault_num,
void do_page_fault(struct pt_regs *regs, int fault_num,
unsigned long address, unsigned long write)
{
+ task_isolation_check_exception("page fault interrupt %d at %#lx (%#lx)",
+ fault_num, regs->pc, address);
__do_page_fault(regs, fault_num, address, write);
}
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index 40ca30a9fee3..e044e8dd8372 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -31,6 +31,7 @@
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/hugetlb.h>
+#include <linux/isolation.h>
#include <asm/page.h>
#include <asm/sections.h>
@@ -83,6 +84,7 @@ static void hv_flush_update(const struct cpumask *cache_cpumask,
* Don't bother to update atomically; losing a count
* here is not that critical.
*/
+ task_isolation_debug_cpumask(&mask);
for_each_cpu(cpu, &mask)
++per_cpu(irq_stat, cpu).irq_hv_flush_count;
}
--
2.1.2
next prev parent reply other threads:[~2016-01-04 19:36 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 19:34 [PATCH v9 00/13] support "task_isolation" mode for nohz_full Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 01/13] vmstat: provide a function to quiet down the diff processing Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 02/13] vmstat: add vmstat_idle function Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 03/13] lru_add_drain_all: factor out lru_add_drain_needed Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 04/13] task_isolation: add initial support Chris Metcalf
2016-01-19 15:42 ` Frederic Weisbecker
2016-01-19 20:45 ` Chris Metcalf
2016-01-28 0:28 ` Frederic Weisbecker
2016-01-29 18:18 ` Chris Metcalf
2016-01-30 21:11 ` Frederic Weisbecker
2016-02-11 19:24 ` Chris Metcalf
2016-03-04 12:56 ` Frederic Weisbecker
2016-03-09 19:39 ` Chris Metcalf
2016-04-08 13:56 ` Frederic Weisbecker
2016-04-08 16:34 ` Chris Metcalf
2016-04-12 18:41 ` Chris Metcalf
2016-04-22 13:16 ` Frederic Weisbecker
2016-04-25 20:36 ` Chris Metcalf
2016-05-26 1:07 ` Frederic Weisbecker
2016-06-03 19:32 ` Chris Metcalf
2016-06-29 15:18 ` Frederic Weisbecker
2016-07-01 20:59 ` Chris Metcalf
2016-07-05 14:41 ` Frederic Weisbecker
2016-07-05 17:47 ` Christoph Lameter
2016-01-04 19:34 ` [PATCH v9 05/13] task_isolation: support PR_TASK_ISOLATION_STRICT mode Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 06/13] task_isolation: add debug boot flag Chris Metcalf
2016-01-04 22:52 ` Steven Rostedt
2016-01-04 23:42 ` Chris Metcalf
2016-01-05 13:42 ` Steven Rostedt
2016-01-04 19:34 ` [PATCH v9 07/13] arch/x86: enable task isolation functionality Chris Metcalf
2016-01-04 21:02 ` [PATCH v9bis " Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 08/13] arch/arm64: adopt prepare_exit_to_usermode() model from x86 Chris Metcalf
2016-01-04 20:33 ` Mark Rutland
2016-01-04 21:01 ` Chris Metcalf
2016-01-05 17:21 ` Mark Rutland
2016-01-05 17:33 ` [PATCH 1/2] arm64: entry: remove pointless SPSR mode check Mark Rutland
2016-01-06 12:15 ` Catalin Marinas
2016-01-05 17:33 ` [PATCH 2/2] arm64: factor work_pending state machine to C Mark Rutland
2016-01-05 18:53 ` Chris Metcalf
2016-01-06 12:30 ` Catalin Marinas
2016-01-06 12:47 ` Mark Rutland
2016-01-06 13:43 ` Mark Rutland
2016-01-06 14:17 ` Catalin Marinas
2016-01-04 22:31 ` [PATCH v9 08/13] arch/arm64: adopt prepare_exit_to_usermode() model from x86 Andy Lutomirski
2016-01-05 18:01 ` Mark Rutland
2016-01-04 19:34 ` [PATCH v9 09/13] arch/arm64: enable task isolation functionality Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 10/13] arch/tile: adopt prepare_exit_to_usermode() model from x86 Chris Metcalf
2016-01-04 19:34 ` [PATCH v9 11/13] arch/tile: move user_exit() to early kernel entry sequence Chris Metcalf
2016-01-04 19:34 ` Chris Metcalf [this message]
2016-01-04 19:34 ` [PATCH v9 13/13] arm, tile: turn off timer tick for oneshot_stopped state Chris Metcalf
2016-01-11 21:15 ` [PATCH v9 00/13] support "task_isolation" mode for nohz_full Chris Metcalf
2016-01-12 10:07 ` Will Deacon
2016-01-12 17:49 ` Chris Metcalf
2016-01-13 10:44 ` Ingo Molnar
2016-01-13 21:19 ` Chris Metcalf
2016-01-20 13:27 ` Mark Rutland
2016-01-12 10:53 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451936091-29247-13-git-send-email-cmetcalf@ezchip.com \
--to=cmetcalf@ezchip.com \
--cc=akpm@linux-foundation.org \
--cc=catalin.marinas@arm.com \
--cc=cl@linux.com \
--cc=fweisbec@gmail.com \
--cc=giladb@ezchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=viresh.kumar@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®