From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: Christoph Hellwig <hch@lst.de>
Cc: "Nicholas A. Bellinger" <nab@daterainc.com>,
target-devel <target-devel@vger.kernel.org>,
linux-scsi <linux-scsi@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>,
Sagi Grimberg <sagig@mellanox.com>,
Hannes Reinecke <hare@suse.de>, Andy Grover <agrover@redhat.com>,
Vasu Dev <vasu.dev@linux.intel.com>, Vu Pham <vu@mellanox.com>
Subject: Re: [PATCH-v2 4/4] target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
Date: Wed, 13 Jan 2016 00:38:08 -0800 [thread overview]
Message-ID: <1452674288.27508.47.camel@haakon3.risingtidesystems.com> (raw)
In-Reply-To: <20160113081518.GA12642@lst.de>
On Wed, 2016-01-13 at 09:15 +0100, Christoph Hellwig wrote:
> On Wed, Jan 13, 2016 at 12:00:28AM -0800, Nicholas A. Bellinger wrote:
> > diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
> > index 52ae8ba..62f02ea 100644
> > --- a/drivers/target/target_core_tpg.c
> > +++ b/drivers/target/target_core_tpg.c
> > @@ -75,16 +75,9 @@ struct se_node_acl *core_tpg_get_initiator_node_acl(
> > unsigned char *initiatorname)
> > {
> > struct se_node_acl *acl;
> > - /*
> > - * Obtain the acl_kref now, which will be dropped upon the
> > - * release of se_sess memory within transport_free_session().
> > - */
> > +
> > mutex_lock(&tpg->acl_node_mutex);
> > acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
> > - if (acl) {
> > - if (!kref_get_unless_zero(&acl->acl_kref))
> > - acl = NULL;
> > - }
>
> nah, please keep the kref_get_unless_zero here, it's needed. It's
> just the misleding comment I was complaining about :)
Ok. How about the following comment instead..?
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 62f02ea..1984bb2 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -75,9 +75,21 @@ struct se_node_acl *core_tpg_get_initiator_node_acl(
unsigned char *initiatorname)
{
struct se_node_acl *acl;
-
+ /*
+ * Obtain se_node_acl->acl_kref using fabric driver provided
+ * initiatorname[] during node acl endpoint lookup driven by
+ * new se_session login.
+ *
+ * The reference is held until se_session shutdown -> release
+ * occurs via fabric driver invoked transport_deregister_session()
+ * or transport_free_session() code.
+ */
>
> > @@ -3435,10 +3436,14 @@ iscsit_build_sendtargets_response(struct iscsi_cmd *cmd,
> >
> > if ((tpg->tpg_attrib.generate_node_acls == 0) &&
> > (tpg->tpg_attrib.demo_mode_discovery == 0) &&
> > - (!core_tpg_get_initiator_node_acl(&tpg->tpg_se_tpg,
> > - cmd->conn->sess->sess_ops->InitiatorName))) {
> > + (!(se_acl = core_tpg_get_initiator_node_acl(&tpg->tpg_se_tpg,
> > + cmd->conn->sess->sess_ops->InitiatorName)))) {
> > continue;
> > }
> > + if (se_acl) {
> > + target_put_nacl(se_acl);
> > + se_acl = NULL;
> > + }
>
>
> Seems like with the current code we don't need to keep the ACL,
> so a new helper like:
>
> bool target_tpg_has_node_acl(struct se_portal_group *tpg,
> const char *initiatorname)
> {
> struct se_node_acl *acl;
>
> acl = core_tpg_get_initiator_node_acl(tpg, initiatorname);
> if (acl) {
> target_put_nacl(se_acl);
> return true;
> }
>
> return false;
> }
>
> or fully open coded as:
>
> bool target_tpg_has_node_acl(struct se_portal_group *tpg,
> const char *initiatorname)
> {
> struct se_node_acl *acl;
> bool found = false;
>
> mutex_lock(&tpg->acl_node_mutex);
> list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
> if (!strcmp(acl->initiatorname, initiatorname)) {
> found = true;
> break;
> }
> }
> mutex_unlock(&tpg->acl_node_mutex);
>
> return found;
> }
>
> might be better to keep the code readable.
Seems reasonable. Adding this instead.
next prev parent reply other threads:[~2016-01-13 8:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-10 20:28 [PATCH-v2 0/4] target: Close se_node_acl lookup race Nicholas A. Bellinger
2016-01-10 20:28 ` [PATCH-v2 1/4] tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage Nicholas A. Bellinger
2016-01-11 21:05 ` Bart Van Assche
2016-01-12 15:02 ` Christoph Hellwig
2016-01-13 7:19 ` Nicholas A. Bellinger
2016-01-10 20:28 ` [PATCH-v2 2/4] ib_srpt: " Nicholas A. Bellinger
2016-01-11 21:34 ` Bart Van Assche
2016-01-13 16:39 ` Sagi Grimberg
2016-01-10 20:28 ` [PATCH-v2 3/4] target: Fix change depth se_session reference usage Nicholas A. Bellinger
2016-01-12 15:07 ` Christoph Hellwig
2016-01-13 7:29 ` Nicholas A. Bellinger
2016-01-13 8:24 ` Christoph Hellwig
2016-01-13 8:56 ` Nicholas A. Bellinger
2016-01-13 8:27 ` Christoph Hellwig
2016-01-13 8:58 ` Nicholas A. Bellinger
2016-01-13 16:45 ` Sagi Grimberg
2016-01-10 20:28 ` [PATCH-v2 4/4] target: Obtain se_node_acl->acl_kref during get_initiator_node_acl Nicholas A. Bellinger
2016-01-12 15:09 ` Christoph Hellwig
2016-01-13 8:00 ` Nicholas A. Bellinger
2016-01-13 8:15 ` Christoph Hellwig
2016-01-13 8:38 ` Nicholas A. Bellinger [this message]
2016-01-13 8:49 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452674288.27508.47.camel@haakon3.risingtidesystems.com \
--to=nab@linux-iscsi.org \
--cc=agrover@redhat.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=nab@daterainc.com \
--cc=sagig@mellanox.com \
--cc=target-devel@vger.kernel.org \
--cc=vasu.dev@linux.intel.com \
--cc=vu@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®