mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Kukjin Kim <kgene@kernel.org>,
	rtc-linux@googlegroups.com, Chanwoo Choi <cw00.choi@samsung.com>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	linux-samsung-soc@vger.kernel.org,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/10] rtc: max77686: Extend driver and add max77802 support
Date: Tue, 26 Jan 2016 16:20:10 -0300	[thread overview]
Message-ID: <1453836020-29579-1-git-send-email-javier@osg.samsung.com> (raw)

Hello,

On a recent disussion [0] with Krzysztof Kozlowski and Laxman Dewangan,
we came to the conclusion that the max77686 and max77802 RTC are almost
the same with only a few differences so there shouldn't be two separate
drivers and is better to extend max77686 driver and delete rtc-max77802.

By making the driver more generic, other RTC IP blocks from Maxim PMICs
could be supported as well like the max77620.

This is a v3 of a series that do this, that address issues pointed out
by Krzysztof Kozlowski. The v1 and v2 can be found at [1] and [2].

I've tested this patch-set on an Exynos5800 Peach Pi Chromebook that has
a max77802 PMIC and the RTC was working correctly but I don't have a
machine with max77686 so I will really appreaciate if someone can test
that no regressions were introduced.

[0]: http://www.spinics.net/lists/devicetree/msg110348.html
[1]: https://lwn.net/Articles/672568/
[2]: https://lkml.org/lkml/2016/1/25/767

Changes in v3:
- Add Krzysztof Kozlowski's Reviewed-by and Tested-by to patch #1.
- Add Laxman Dewangan's Acked-by tag to patch #1.
- Add Krzysztof Kozlowski's Tested-by tag to patch #2.
- Add Laxman Dewangan's Acked-by tag to patch #2.
- Use ARRAY_SIZE() in all places. Suggested by Laxman Dewangan.
- Add Krzysztof Kozlowski's Tested-by tag to patch #3.
- Add Laxman Dewangan's Acked-by tag to patch #3.
- Fix max77686 delay. Suggested by Krzysztof Kozlowski.
- Assign mask to u8 instead of int. Suggested by Krzysztof Kozlowski.
- Add Laxman Dewangan's Acked-by tag to patch #4.
- Add Laxman Dewangan's Acked-by tag to patch #5.
- Add Laxman Dewangan's Acked-by tag to patch #6.
- Add Laxman Dewangan's Acked-by tag to patch #7.
- Add Laxman Dewangan's Acked-by tag to patch #8.

Changes in v2:
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #2.
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #3.
- Fix typo error in changelog. Suggested by Krzysztof Kozlowski.
- Add a max77686 prefix to rtc_driver_data. Suggested by Krzysztof Kozlowski.
- Comment about the .delay and .mask fields. Suggested by Krzysztof Kozlowski.
- Change .mask type to u8. Suggested by Krzysztof Kozlowski.
- Make .drv_data field const. Suggested by Krzysztof Kozlowski.
- Don't cast to drop const on .drv_data asign. Suggested by Krzysztof Kozlowski.
- Use platform_get_device_id() macro. Suggested by Krzysztof Kozlowski.
- Rename rtc_reg to max77686_rtc_reg_offset. Suggested by Krzysztof Kozlowski.
- Comment what's mapped by max77686_map. Suggested by Krzysztof Kozlowski.
- Use max77686_map array indexes in init. Suggested by Krzysztof Kozlowski.
- Remove REG_RTC_UPDATE1 since is not used by neither max77686 nor max77802.
- Add a MAX77802 prefix to ALARM_ENABLE_VALUE. Suggested by Krzysztof Kozlowski.
- Rename .rtcae to .alarm_enable_reg and .rtcrm to .separate_i2c_addr.
  Suggested by Krzysztof Kozlowski.
- Don't use func and LINE in error messages. Suggested by Krzysztof Kozlowski.
- Remove REG_RTC_AE2 since is not used by neither max77686 nor max77802.
- Check if REG_RTC_AE1 has a valid address before accessing it.
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #8.
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #9.
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #10.

Javier Martinez Canillas (10):
  rtc: max77686: Fix max77686_rtc_read_alarm() return value
  rtc: max77686: Use ARRAY_SIZE() instead of current array length
  rtc: max77686: Use usleep_range() instead of msleep()
  rtc: max77686: Use a driver data struct instead hard-coded values
  rtc: max77686: Add an indirection level to access RTC registers
  rtc: max77686: Add max77802 support
  rtc: max77686: Use dev_warn() instead of pr_warn()
  rtc: Remove Maxim 77802 driver
  ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
  ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol

 arch/arm/configs/exynos_defconfig   |   1 -
 arch/arm/configs/multi_v7_defconfig |   1 -
 drivers/rtc/Kconfig                 |  10 -
 drivers/rtc/Makefile                |   1 -
 drivers/rtc/rtc-max77686.c          | 336 +++++++++++++++++++-----
 drivers/rtc/rtc-max77802.c          | 502 ------------------------------------
 6 files changed, 270 insertions(+), 581 deletions(-)
 delete mode 100644 drivers/rtc/rtc-max77802.c

-- 
2.5.0

             reply	other threads:[~2016-01-26 19:20 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-26 19:20 Javier Martinez Canillas [this message]
2016-01-26 19:20 ` [PATCH v3 01/10] rtc: max77686: Fix max77686_rtc_read_alarm() return value Javier Martinez Canillas
2016-01-27  1:19   ` Andi Shyti
2016-01-26 19:20 ` [PATCH v3 02/10] rtc: max77686: Use ARRAY_SIZE() instead of current array length Javier Martinez Canillas
2016-01-27  1:20   ` Andi Shyti
2016-01-26 19:20 ` [PATCH v3 03/10] rtc: max77686: Use usleep_range() instead of msleep() Javier Martinez Canillas
2016-01-27  1:21   ` Andi Shyti
2016-01-26 19:20 ` [PATCH v3 04/10] rtc: max77686: Use a driver data struct instead hard-coded values Javier Martinez Canillas
2016-01-27  1:21   ` Andi Shyti
2016-01-27  1:47   ` Krzysztof Kozlowski
2016-01-26 19:20 ` [PATCH v3 05/10] rtc: max77686: Add an indirection level to access RTC registers Javier Martinez Canillas
2016-01-27  1:53   ` Krzysztof Kozlowski
2016-01-26 19:20 ` [PATCH v3 06/10] rtc: max77686: Add max77802 support Javier Martinez Canillas
2016-01-27  1:59   ` Krzysztof Kozlowski
2016-01-27  2:24     ` Javier Martinez Canillas
2016-01-27  2:22   ` Andi Shyti
2016-01-26 19:20 ` [PATCH v3 07/10] rtc: max77686: Use dev_warn() instead of pr_warn() Javier Martinez Canillas
2016-01-27  1:22   ` Andi Shyti
2016-01-27  1:53     ` Javier Martinez Canillas
2016-01-27  2:05       ` Krzysztof Kozlowski
2016-01-27  2:20         ` Javier Martinez Canillas
2016-01-27  2:35         ` Andi Shyti
2016-01-27  2:42           ` Javier Martinez Canillas
2016-01-27  2:46         ` Alexandre Belloni
2016-01-27  2:50           ` Javier Martinez Canillas
2016-01-27  2:12       ` Andi Shyti
2016-01-26 19:20 ` [PATCH v3 08/10] rtc: Remove Maxim 77802 driver Javier Martinez Canillas
2016-01-27  1:22   ` Andi Shyti
2016-01-27  2:09   ` Krzysztof Kozlowski
2016-01-26 19:20 ` [PATCH v3 09/10] ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol Javier Martinez Canillas
2016-01-26 19:20 ` [PATCH v3 10/10] ARM: multi_v7_defconfig: " Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453836020-29579-1-git-send-email-javier@osg.samsung.com \
    --to=javier@osg.samsung.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=arnd@arndb.de \
    --cc=cw00.choi@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=ldewangan@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®