[PATCH v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC

[PATCH v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC

[Chen Feng]

From: Chen Feng <puck.chen@hisilicon.com>

DT bindings for hisilicon hi655x MFD PMIC chip.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000..56d3333
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,27 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by PMIC irq.
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	}
-- 
1.9.1

[PATCH v7 2/5] regulator: hi655x: Document for hi655x regulator

[Chen Feng]

From: Chen Feng <puck.chen@hisilicon.com>

This patch adds the device tree binding documentation for
hi655x PMIC regulator.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../regulator/hisilicon,hi655x-regulator.txt       | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
new file mode 100644
index 0000000..5f72277
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
@@ -0,0 +1,28 @@
+Hisilicon Hi655x Voltage regulators
+
+Note:
+The hi655x regulator control is managed by hi655x Power IC.
+So the node of this regulator must be child node of hi655x
+PMIC node.
+
+The driver uses the regulator core framework, so please also
+take the bindings of regulator.txt for reference.
+
+The valid names for regulators are:
+
+LDO2 LDO7 LDO10 LDO13 LDO14 LDO15 LDO17 LDO19 LDO21 LDO22
+
+Example:
+        pmic: pmic@f8000000 {
+                compatible = "hisilicon,hi655x-pmic";
+		...
+		regulators {
+			ldo2: LDO2@a21 {
+				regulator-compatible = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+			...
+		}
+	}
-- 
1.9.1

[PATCH v7 3/5] mfd: hi655x: Add MFD driver for hi655x

[Chen Feng]

From: Chen Feng <puck.chen@hisilicon.com>

Add PMIC MFD driver to support hisilicon hi665x.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 drivers/mfd/Kconfig             |  10 +++
 drivers/mfd/Makefile            |   1 +
 drivers/mfd/hi655x-pmic.c       | 162 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/hi655x-pmic.h |  54 ++++++++++++++
 4 files changed, 227 insertions(+)
 create mode 100644 drivers/mfd/hi655x-pmic.c
 create mode 100644 include/linux/mfd/hi655x-pmic.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..5b1c091 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI655X_PMIC
+	tristate "HiSilicon Hi655X series PMU/Codec IC"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on OF
+	select MFD_CORE
+	select REGMAP_MMIO
+	select REGMAP_IRQ
+	help
+	  Select this option to enable Hisilicon hi655x series pmic driver.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..1e166c1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -190,6 +190,7 @@ obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
diff --git a/drivers/mfd/hi655x-pmic.c b/drivers/mfd/hi655x-pmic.c
new file mode 100644
index 0000000..4b6e225
--- /dev/null
+++ b/drivers/mfd/hi655x-pmic.c
@@ -0,0 +1,162 @@
+/*
+ * Device driver for MFD hi655x PMIC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Authors:
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei  Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi655x-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell hi655x_pmic_devs[] = {
+	{ .name = "hi655x-regulator", },
+};
+
+static const struct regmap_irq hi655x_irqs[] = {
+	{ .reg_offset = 0, .mask = OTMP_D1R_INT },
+	{ .reg_offset = 0, .mask = VSYS_2P5_R_INT },
+	{ .reg_offset = 0, .mask = VSYS_UV_D3R_INT },
+	{ .reg_offset = 0, .mask = VSYS_6P0_D200UR_INT },
+	{ .reg_offset = 0, .mask = PWRON_D4SR_INT },
+	{ .reg_offset = 0, .mask = PWRON_D20F_INT },
+	{ .reg_offset = 0, .mask = PWRON_D20R_INT },
+	{ .reg_offset = 0, .mask = RESERVE_INT },
+};
+
+static const struct regmap_irq_chip hi655x_irq_chip = {
+	.name = "hi655x-pmic",
+	.irqs = hi655x_irqs,
+	.num_regs = 1,
+	.num_irqs = ARRAY_SIZE(hi655x_irqs),
+	.status_base = HI655X_IRQ_STAT_BASE,
+	.mask_base = HI655X_IRQ_MASK_BASE,
+};
+
+static struct regmap_config hi655x_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = HI655X_STRIDE,
+	.val_bits = 8,
+	.max_register = HI655X_BUS_ADDR(0xFFF),
+};
+
+static void hi655x_local_irq_clear(struct regmap *map)
+{
+	int i;
+
+	regmap_write(map, HI655X_ANA_IRQM_BASE, HI655X_IRQ_CLR);
+	for (i = 0; i < HI655X_IRQ_ARRAY; i++) {
+		regmap_write(map, HI655X_IRQ_STAT_BASE + i * HI655X_STRIDE,
+			     HI655X_IRQ_CLR);
+	}
+}
+
+static int hi655x_pmic_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct hi655x_pmic *pmic;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void __iomem *base;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+	pmic->dev = dev;
+
+	pmic->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pmic->res)
+		return -ENOENT;
+
+	base = devm_ioremap_resource(dev, pmic->res);
+	if (!base)
+		return -ENOMEM;
+
+	pmic->regmap = devm_regmap_init_mmio_clk(dev, NULL, base,
+						 &hi655x_regmap_config);
+
+	regmap_read(pmic->regmap, HI655X_BUS_ADDR(HI655X_VER_REG), &pmic->ver);
+	if ((pmic->ver < PMU_VER_START) || (pmic->ver > PMU_VER_END)) {
+		dev_warn(dev, "PMU version %d unsupported\n", pmic->ver);
+		return -EINVAL;
+	}
+
+	hi655x_local_irq_clear(pmic->regmap);
+
+	pmic->gpio = of_get_named_gpio(np, "pmic-gpios", 0);
+	if (!gpio_is_valid(pmic->gpio)) {
+		dev_err(dev, "Failed to get the pmic-gpios\n");
+		return -ENODEV;
+	}
+
+	ret = devm_gpio_request_one(dev, pmic->gpio, GPIOF_IN,
+				    "hi655x_pmic_irq");
+	if (ret < 0) {
+		dev_err(dev, "Failed to request gpio %d  ret = %d\n",
+			pmic->gpio, ret);
+		return ret;
+	}
+
+	ret = regmap_add_irq_chip(pmic->regmap, gpio_to_irq(pmic->gpio),
+				  IRQF_TRIGGER_LOW | IRQF_NO_SUSPEND, 0,
+				  &hi655x_irq_chip, &pmic->irq_data);
+	if (ret) {
+		dev_err(dev, "Failed to obtain 'hi655x_pmic_irq' %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pmic);
+
+	ret = mfd_add_devices(dev, PLATFORM_DEVID_AUTO, hi655x_pmic_devs,
+			      ARRAY_SIZE(hi655x_pmic_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to register device %d\n", ret);
+		regmap_del_irq_chip(gpio_to_irq(pmic->gpio), pmic->irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hi655x_pmic_remove(struct platform_device *pdev)
+{
+	struct hi655x_pmic *pmic = platform_get_drvdata(pdev);
+	regmap_del_irq_chip(gpio_to_irq(pmic->gpio), pmic->irq_data);
+	mfd_remove_devices(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id hi655x_pmic_match[] = {
+	{ .compatible = "hisilicon,hi655x-pmic", },
+	{},
+};
+
+static struct platform_driver hi655x_pmic_driver = {
+	.driver	= {
+		.name =	"hi655x-pmic",
+		.of_match_table = of_match_ptr(hi655x_pmic_match),
+	},
+	.probe  = hi655x_pmic_probe,
+	.remove = hi655x_pmic_remove,
+};
+module_platform_driver(hi655x_pmic_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon hi655x PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/hi655x-pmic.h b/include/linux/mfd/hi655x-pmic.h
new file mode 100644
index 0000000..0bc2212
--- /dev/null
+++ b/include/linux/mfd/hi655x-pmic.h
@@ -0,0 +1,54 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei  Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __HI655X_PMIC_H
+#define __HI655X_PMIC_H
+
+/* Hi655x registers are mapped to memory bus in 4 bytes stride */
+#define HI655X_STRIDE                   4
+#define HI655X_BUS_ADDR(x)              ((x) << 2)
+
+#define HI655X_BITS                     8
+
+#define HI655X_NR_IRQ                   32
+
+#define HI655X_IRQ_STAT_BASE            (0x003 << 2)
+#define HI655X_IRQ_MASK_BASE            (0x007 << 2)
+#define HI655X_ANA_IRQM_BASE            (0x1b5 << 2)
+#define HI655X_IRQ_ARRAY                4
+#define HI655X_IRQ_MASK                 0xFF
+#define HI655X_IRQ_CLR                  0xFF
+#define HI655X_VER_REG                  0x00
+
+#define PMU_VER_START                   0x10
+#define PMU_VER_END                     0x38
+
+#define RESERVE_INT                     BIT(7)
+#define PWRON_D20R_INT                  BIT(6)
+#define PWRON_D20F_INT                  BIT(5)
+#define PWRON_D4SR_INT                  BIT(4)
+#define VSYS_6P0_D200UR_INT             BIT(3)
+#define VSYS_UV_D3R_INT                 BIT(2)
+#define VSYS_2P5_R_INT                  BIT(1)
+#define OTMP_D1R_INT                    BIT(0)
+
+struct hi655x_pmic {
+	struct resource *res;
+	struct device *dev;
+	struct regmap *regmap;
+	int gpio;
+	unsigned int ver;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+#endif
-- 
1.9.1

[PATCH v7 4/5] regulator: hi655x: enable regulator for hi655x PMIC

[Chen Feng]

From: Chen Feng <puck.chen@hisilicon.com>

Add the regulator driver for hi655x PMIC.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 drivers/regulator/Kconfig            |   8 ++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/hi655x-regulator.c | 227 +++++++++++++++++++++++++++++++++++
 3 files changed, 236 insertions(+)
 create mode 100644 drivers/regulator/hi655x-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8155e80..cd8ce7e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -261,6 +261,14 @@ config REGULATOR_HI6421
 	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 	  of them come with support to either ECO (idle) or sleep mode.
 
+config REGULATOR_HI655X
+	tristate "Hisilicon HI655X PMIC regulators support"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on MFD_HI655X_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators of the
+	  Hisilicon Hi655x PMIC device.
+
 config REGULATOR_ISL9305
 	tristate "Intersil ISL9305 regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 980b194..422786c 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
 obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c
new file mode 100644
index 0000000..95f2048
--- /dev/null
+++ b/drivers/regulator/hi655x-regulator.c
@@ -0,0 +1,227 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei  Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi655x-pmic.h>
+
+struct hi655x_regulator {
+	unsigned int disable_reg;
+	unsigned int status_reg;
+	unsigned int ctrl_regs;
+	unsigned int ctrl_mask;
+	struct regulator_desc rdesc;
+};
+
+/* LDO7 & LDO10 */
+static const unsigned int ldo7_voltages[] = {
+	1800000, 1850000, 2850000, 2900000,
+	3000000, 3100000, 3200000, 3300000,
+};
+
+static const unsigned int ldo19_voltages[] = {
+	1800000, 1850000, 1900000, 1750000,
+	2800000, 2850000, 2900000, 3000000,
+};
+
+static const unsigned int ldo22_voltages[] = {
+	 900000, 1000000, 1050000, 1100000,
+	1150000, 1175000, 1185000, 1200000,
+};
+
+enum hi655x_regulator_id {
+	HI655X_LDO0,
+	HI655X_LDO1,
+	HI655X_LDO2,
+	HI655X_LDO3,
+	HI655X_LDO4,
+	HI655X_LDO5,
+	HI655X_LDO6,
+	HI655X_LDO7,
+	HI655X_LDO8,
+	HI655X_LDO9,
+	HI655X_LDO10,
+	HI655X_LDO11,
+	HI655X_LDO12,
+	HI655X_LDO13,
+	HI655X_LDO14,
+	HI655X_LDO15,
+	HI655X_LDO16,
+	HI655X_LDO17,
+	HI655X_LDO18,
+	HI655X_LDO19,
+	HI655X_LDO20,
+	HI655X_LDO21,
+	HI655X_LDO22,
+};
+
+static int hi655x_is_enabled(struct regulator_dev *rdev)
+{
+	unsigned int value = 0;
+
+	struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+	regmap_read(rdev->regmap, regulator->status_reg, &value);
+	return (value & BIT(regulator->ctrl_mask));
+}
+
+static int hi655x_disable(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+	ret = regmap_write(rdev->regmap, regulator->disable_reg,
+			   BIT(regulator->ctrl_mask));
+	return ret;
+}
+
+static struct regulator_ops hi655x_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = hi655x_disable,
+	.is_enabled = hi655x_is_enabled,
+	.list_voltage = regulator_list_voltage_table,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops hi655x_ldo_linear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = hi655x_disable,
+	.is_enabled = hi655x_is_enabled,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg,                 \
+		   sreg, cmask, vtable) {                        \
+	.rdesc = {                                               \
+		.name            = #_ID,                         \
+		.of_match        = of_match_ptr(#_ID),           \
+		.ops             = &hi655x_regulator_ops,        \
+		.regulators_node = of_match_ptr("regulators"),   \
+		.type            = REGULATOR_VOLTAGE,            \
+		.id              = HI655X_##_ID,                 \
+		.owner           = THIS_MODULE,                  \
+		.n_voltages      = ARRAY_SIZE(vtable),           \
+		.volt_table      = vtable,                       \
+		.vsel_reg        = HI655X_BUS_ADDR(vreg),        \
+		.vsel_mask       = vmask,                        \
+		.enable_reg      = HI655X_BUS_ADDR(ereg),        \
+		.enable_mask     = cmask,                        \
+	},                                                       \
+	.disable_reg = HI655X_BUS_ADDR(dreg),                    \
+	.status_reg = HI655X_BUS_ADDR(sreg),                     \
+	.ctrl_mask = cmask,                                      \
+}
+
+#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg,          \
+			  sreg, cmask, minv, nvolt, vstep) {     \
+	.rdesc = {                                               \
+		.name            = #_ID,                         \
+		.of_match        = of_match_ptr(#_ID),           \
+		.ops             = &hi655x_ldo_linear_ops,       \
+		.regulators_node = of_match_ptr("regulators"),   \
+		.type            = REGULATOR_VOLTAGE,            \
+		.id              = HI655X_##_ID,                 \
+		.owner           = THIS_MODULE,                  \
+		.min_uV          = minv,                         \
+		.n_voltages      = nvolt,                        \
+		.uV_step         = vstep,                        \
+		.uV_step         = vstep,                        \
+		.vsel_reg        = HI655X_BUS_ADDR(vreg),        \
+		.vsel_mask       = vmask,                        \
+		.enable_reg      = HI655X_BUS_ADDR(ereg),        \
+		.enable_mask     = cmask,                        \
+	},                                                       \
+	.disable_reg = HI655X_BUS_ADDR(dreg),                    \
+	.status_reg = HI655X_BUS_ADDR(sreg),                     \
+	.ctrl_mask = cmask,                                      \
+}
+
+static struct hi655x_regulator regulators[] = {
+	HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01,
+			  2500000, 8, 100000),
+	HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages),
+	HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages),
+	HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04,
+			  1600000, 8, 50000),
+	HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05,
+			  2500000, 8, 100000),
+	HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06,
+			  1600000, 8, 50000),
+	HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00,
+			  2500000, 8, 100000),
+	HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages),
+	HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04,
+			  1650000, 8, 50000),
+	HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages),
+};
+
+static int hi655x_regulator_probe(struct platform_device *pdev)
+{
+	unsigned int i;
+	struct hi655x_regulator *regulator;
+	struct hi655x_pmic *pmic;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic) {
+		dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+		return -ENODEV;
+	}
+
+	regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL);
+	if (!regulator)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, regulator);
+
+	config.dev = pdev->dev.parent;
+	config.regmap = pmic->regmap;
+	config.driver_data = regulator;
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		rdev = devm_regulator_register(&pdev->dev,
+					       &regulators[i].rdesc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				regulator->rdesc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static struct platform_driver hi655x_regulator_driver = {
+	.driver = {
+		.name	= "hi655x-regulator",
+	},
+	.probe	= hi655x_regulator_probe,
+};
+module_platform_driver(hi655x_regulator_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon hi655x regulator driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

[PATCH v7 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node

[Chen Feng]

From: Chen Feng <puck.chen@hisilicon.com>

Add the mfd hi655x dts node and regulator support on
hi6220 platform.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 8185251..775ea36 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -6,6 +6,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 
 /*Reserved 1MB memory for MCU*/
 /memreserve/ 0x05e00000 0x00100000;
@@ -31,6 +32,92 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+
+		regulators {
+			ldo2: LDO2@a21 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo7: LDO7@a26 {
+				regulator-name = "LDO7_SDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo10: LDO10@a29 {
+				regulator-name = "LDO10_2V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo13: LDO13@a32 {
+				regulator-name = "LDO13_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo14: LDO14@a33 {
+				regulator-name = "LDO14_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo15: LDO15@a34 {
+				regulator-name = "LDO15_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo17: LDO17@a36 {
+				regulator-name = "LDO17_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo19: LDO19@a38 {
+				regulator-name = "LDO19_3V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo21: LDO21@a40 {
+				regulator-name = "LDO21_1V8";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo22: LDO22@a41 {
+				regulator-name = "LDO22_1V2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+		};
+	};
 };
 
 &uart2 {
-- 
1.9.1