From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
To: Greg KH <greg@kroah.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>,
Chunyan Zhang <zhang.chunyan@linaro.org>,
laurent.fert@intel.com, yann.fouassier@intel.com,
linux-kernel@vger.kernel.org,
Alexander Shishkin <alexander.shishkin@linux.intel.com>
Subject: [PATCH 05/20] intel_th: Update scratchpad bits according to enabled output activity
Date: Mon, 15 Feb 2016 19:11:55 +0200 [thread overview]
Message-ID: <1455556330-12473-6-git-send-email-alexander.shishkin@linux.intel.com> (raw)
In-Reply-To: <1455556330-12473-1-git-send-email-alexander.shishkin@linux.intel.com>
Intel TH implements a scratchpad register to indicate to the firmware
and external debuggers what trace configuration is enabled so that
everybody plays nicely together. The register is a bit field and the
bit assignment convention is described in the developer's manual.
This patch enables the driver to automatically set scratchpad register
bits according to the output configuration that's enabled.
Based on work by Yann Fouassier.
Signed-off-by: Yann Fouassier <yann.fouassier@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
drivers/hwtracing/intel_th/core.c | 5 +++++
drivers/hwtracing/intel_th/gth.c | 14 +++++++++++-
drivers/hwtracing/intel_th/gth.h | 3 ---
drivers/hwtracing/intel_th/intel_th.h | 41 +++++++++++++++++++++++++++++++++++
4 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c
index 165d3001c3..b8b9895da5 100644
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@@ -319,6 +319,7 @@ static struct intel_th_subdevice {
unsigned nres;
unsigned type;
unsigned otype;
+ unsigned scrpd;
int id;
} intel_th_subdevices[TH_SUBDEVICE_MAX] = {
{
@@ -352,6 +353,7 @@ static struct intel_th_subdevice {
.id = 0,
.type = INTEL_TH_OUTPUT,
.otype = GTH_MSU,
+ .scrpd = SCRPD_MEM_IS_PRIM_DEST | SCRPD_MSC0_IS_ENABLED,
},
{
.nres = 2,
@@ -371,6 +373,7 @@ static struct intel_th_subdevice {
.id = 1,
.type = INTEL_TH_OUTPUT,
.otype = GTH_MSU,
+ .scrpd = SCRPD_MEM_IS_PRIM_DEST | SCRPD_MSC1_IS_ENABLED,
},
{
.nres = 2,
@@ -403,6 +406,7 @@ static struct intel_th_subdevice {
.name = "pti",
.type = INTEL_TH_OUTPUT,
.otype = GTH_PTI,
+ .scrpd = SCRPD_PTI_IS_PRIM_DEST,
},
{
.nres = 1,
@@ -477,6 +481,7 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
thdev->dev.devt = MKDEV(th->major, i);
thdev->output.type = subdev->otype;
thdev->output.port = -1;
+ thdev->output.scratchpad = subdev->scrpd;
}
err = device_add(&thdev->dev);
diff --git a/drivers/hwtracing/intel_th/gth.c b/drivers/hwtracing/intel_th/gth.c
index e4c9811c1f..9beea0b542 100644
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -286,6 +286,10 @@ static int intel_th_gth_reset(struct gth_device *gth)
if (scratchpad & SCRPD_DEBUGGER_IN_USE)
return -EBUSY;
+ /* Always save/restore STH and TU registers in S0ix entry/exit */
+ scratchpad |= SCRPD_STH_IS_ENABLED | SCRPD_TRIGGER_IS_ENABLED;
+ iowrite32(scratchpad, gth->base + REG_GTH_SCRPD0);
+
/* output ports */
for (port = 0; port < 8; port++) {
if (gth_output_parm_get(gth, port, TH_OUTPUT_PARM(port)) ==
@@ -488,6 +492,10 @@ static void intel_th_gth_disable(struct intel_th_device *thdev,
if (!count)
dev_dbg(&thdev->dev, "timeout waiting for GTH[%d] PLE\n",
output->port);
+
+ reg = ioread32(gth->base + REG_GTH_SCRPD0);
+ reg &= ~output->scratchpad;
+ iowrite32(reg, gth->base + REG_GTH_SCRPD0);
}
/**
@@ -502,7 +510,7 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
struct intel_th_output *output)
{
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
- u32 scr = 0xfc0000;
+ u32 scr = 0xfc0000, scrpd;
int master;
spin_lock(>h->gth_lock);
@@ -517,6 +525,10 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
output->active = true;
spin_unlock(>h->gth_lock);
+ scrpd = ioread32(gth->base + REG_GTH_SCRPD0);
+ scrpd |= output->scratchpad;
+ iowrite32(scrpd, gth->base + REG_GTH_SCRPD0);
+
iowrite32(scr, gth->base + REG_GTH_SCR);
iowrite32(0, gth->base + REG_GTH_SCR2);
}
diff --git a/drivers/hwtracing/intel_th/gth.h b/drivers/hwtracing/intel_th/gth.h
index 3b714b7a61..56f0d26205 100644
--- a/drivers/hwtracing/intel_th/gth.h
+++ b/drivers/hwtracing/intel_th/gth.h
@@ -57,9 +57,6 @@ enum {
REG_GTH_SCRPD3 = 0xec, /* ScratchPad[3] */
};
-/* Externall debugger is using Intel TH */
-#define SCRPD_DEBUGGER_IN_USE BIT(24)
-
/* waiting for Pipeline Empty bit(s) to assert for GTH */
#define GTH_PLE_WAITLOOP_DEPTH 10000
diff --git a/drivers/hwtracing/intel_th/intel_th.h b/drivers/hwtracing/intel_th/intel_th.h
index 57fd72b20f..eedd09332d 100644
--- a/drivers/hwtracing/intel_th/intel_th.h
+++ b/drivers/hwtracing/intel_th/intel_th.h
@@ -30,6 +30,7 @@ enum {
* struct intel_th_output - descriptor INTEL_TH_OUTPUT type devices
* @port: output port number, assigned by the switch
* @type: GTH_{MSU,CTP,PTI}
+ * @scratchpad: scratchpad bits to flag when this output is enabled
* @multiblock: true for multiblock output configuration
* @active: true when this output is enabled
*
@@ -41,6 +42,7 @@ enum {
struct intel_th_output {
int port;
unsigned int type;
+ unsigned int scratchpad;
bool multiblock;
bool active;
};
@@ -241,4 +243,43 @@ enum {
GTH_PTI = 4, /* MIPI-PTI */
};
+/*
+ * Scratchpad bits: tell firmware and external debuggers
+ * what we are up to.
+ */
+enum {
+ /* Memory is the primary destination */
+ SCRPD_MEM_IS_PRIM_DEST = BIT(0),
+ /* XHCI DbC is the primary destination */
+ SCRPD_DBC_IS_PRIM_DEST = BIT(1),
+ /* PTI is the primary destination */
+ SCRPD_PTI_IS_PRIM_DEST = BIT(2),
+ /* BSSB is the primary destination */
+ SCRPD_BSSB_IS_PRIM_DEST = BIT(3),
+ /* PTI is the alternate destination */
+ SCRPD_PTI_IS_ALT_DEST = BIT(4),
+ /* BSSB is the alternate destination */
+ SCRPD_BSSB_IS_ALT_DEST = BIT(5),
+ /* DeepSx exit occurred */
+ SCRPD_DEEPSX_EXIT = BIT(6),
+ /* S4 exit occurred */
+ SCRPD_S4_EXIT = BIT(7),
+ /* S5 exit occurred */
+ SCRPD_S5_EXIT = BIT(8),
+ /* MSU controller 0/1 is enabled */
+ SCRPD_MSC0_IS_ENABLED = BIT(9),
+ SCRPD_MSC1_IS_ENABLED = BIT(10),
+ /* Sx exit occurred */
+ SCRPD_SX_EXIT = BIT(11),
+ /* Trigger Unit is enabled */
+ SCRPD_TRIGGER_IS_ENABLED = BIT(12),
+ SCRPD_ODLA_IS_ENABLED = BIT(13),
+ SCRPD_SOCHAP_IS_ENABLED = BIT(14),
+ SCRPD_STH_IS_ENABLED = BIT(15),
+ SCRPD_DCIH_IS_ENABLED = BIT(16),
+ SCRPD_VER_IS_ENABLED = BIT(17),
+ /* External debugger is using Intel TH */
+ SCRPD_DEBUGGER_IN_USE = BIT(24),
+};
+
#endif
--
2.7.0
next prev parent reply other threads:[~2016-02-15 17:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-15 16:08 [git pull] stm class/intel_th: Updates for char-misc-next Alexander Shishkin
2016-02-15 16:44 ` Greg KH
2016-02-15 17:11 ` [PATCH 00/20] " Alexander Shishkin
2016-02-15 17:11 ` [PATCH 01/20] stm class: Use a signed return type for stm_find_master_chan Alexander Shishkin
2016-02-15 17:11 ` [PATCH 02/20] stm class: Fix master deallocation in device unregistering Alexander Shishkin
2016-02-15 17:11 ` [PATCH 03/20] intel_th: Depend on HAS_IOMEM Alexander Shishkin
2016-02-15 17:11 ` [PATCH 04/20] intel_th: gth: Remove commented-out code Alexander Shishkin
2016-02-15 17:11 ` Alexander Shishkin [this message]
2016-02-15 17:11 ` [PATCH 06/20] intel_th: msu: Fix offset for wrapped block Alexander Shishkin
2016-02-15 17:11 ` [PATCH 07/20] intel_th: msu: Release resources on read error Alexander Shishkin
2016-02-15 17:11 ` [PATCH 08/20] intel_th: sth: Sanitize packet callback's return values Alexander Shishkin
2016-02-15 17:11 ` [PATCH 09/20] intel_th: Set root device's drvdata early Alexander Shishkin
2016-02-15 17:12 ` [PATCH 10/20] intel_th: Use real device index in the node names Alexander Shishkin
2016-02-15 17:12 ` [PATCH 11/20] stm class: Use driver's packet callback return value Alexander Shishkin
2016-02-15 17:12 ` [PATCH 12/20] stm class: Support devices with multiple instances Alexander Shishkin
2016-02-15 17:12 ` [PATCH 13/20] stm class: dummy_stm: Create multiple devices Alexander Shishkin
2016-02-15 17:12 ` [PATCH 14/20] stm class: Add heartbeat stm source device Alexander Shishkin
2016-02-15 17:12 ` [PATCH 15/20] stm class: Fix unlocking braino in the error path Alexander Shishkin
2016-02-15 17:12 ` [PATCH 16/20] stm class: Guard output assignment against concurrency Alexander Shishkin
2016-02-15 17:12 ` [PATCH 17/20] stm class: Fix unbalanced module/device refcounting Alexander Shishkin
2016-02-15 17:12 ` [PATCH 18/20] stm class: Fix a race in unlinking Alexander Shishkin
2016-02-15 17:12 ` [PATCH 19/20] stm class: Plug stm device's unlink callback Alexander Shishkin
2016-02-15 17:12 ` [PATCH 20/20] stm class: dummy_stm: Add link callback for fault injection Alexander Shishkin
2016-02-16 12:29 ` [git pull] stm class/intel_th: Updates for char-misc-next Alexander Shishkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455556330-12473-6-git-send-email-alexander.shishkin@linux.intel.com \
--to=alexander.shishkin@linux.intel.com \
--cc=greg@kroah.com \
--cc=laurent.fert@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=yann.fouassier@intel.com \
--cc=zhang.chunyan@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome