mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, p.zabel@pengutronix.de
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Ma Haijun <mahaijuns@gmail.com>
Subject: [PATCH v2 07/18] reset: Add PLX Technology Reset Controller driver
Date: Wed,  9 Mar 2016 11:24:09 +0100	[thread overview]
Message-ID: <1457519060-6038-8-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1457519060-6038-1-git-send-email-narmstrong@baylibre.com>

Add System reset controller driver for PLX Technology OXNAS SoC Family.

CC: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/reset/Kconfig       |   3 +
 drivers/reset/Makefile      |   1 +
 drivers/reset/reset-oxnas.c | 136 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 drivers/reset/reset-oxnas.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index df37212..0b2733d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,5 +12,8 @@ menuconfig RESET_CONTROLLER
 
 	  If unsure, say no.
 
+config RESET_OXNAS
+	bool
+
 source "drivers/reset/sti/Kconfig"
 source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4d7178e..97e04c5 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_HISI) += hisilicon/
 obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
 obj-$(CONFIG_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c
new file mode 100644
index 0000000..9cce026
--- /dev/null
+++ b/drivers/reset/reset-oxnas.c
@@ -0,0 +1,136 @@
+/*
+ * drivers/reset/reset-oxnas.c
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+/* Regmap offsets */
+#define RST_SET_REGOFFSET	0x34
+#define RST_CLR_REGOFFSET	0x38
+
+struct oxnas_reset {
+	struct regmap *regmap;
+	struct reset_controller_dev rcdev;
+};
+
+static int oxnas_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct oxnas_reset *data =
+		container_of(rcdev, struct oxnas_reset, rcdev);
+
+	regmap_write(data->regmap, RST_SET_REGOFFSET, BIT(id));
+	msleep(50);
+	regmap_write(data->regmap, RST_CLR_REGOFFSET, BIT(id));
+
+	return 0;
+}
+
+static int oxnas_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct oxnas_reset *data =
+		container_of(rcdev, struct oxnas_reset, rcdev);
+
+	regmap_write(data->regmap, RST_SET_REGOFFSET, BIT(id));
+
+	return 0;
+}
+
+static int oxnas_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct oxnas_reset *data =
+		container_of(rcdev, struct oxnas_reset, rcdev);
+
+	regmap_write(data->regmap, RST_CLR_REGOFFSET, BIT(id));
+
+	return 0;
+}
+
+static const struct reset_control_ops oxnas_reset_ops = {
+	.reset		= oxnas_reset_reset,
+	.assert		= oxnas_reset_assert,
+	.deassert	= oxnas_reset_deassert,
+};
+
+static const struct of_device_id oxnas_reset_dt_ids[] = {
+	 { .compatible = "oxsemi,ox810se-reset", },
+	 { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids);
+
+static int oxnas_reset_probe(struct platform_device *pdev)
+{
+	struct oxnas_reset *data;
+	struct device *parent;
+
+	parent = pdev->dev.parent;
+	if (!parent) {
+		dev_err(&pdev->dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = syscon_node_to_regmap(parent->of_node);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&pdev->dev, "failed to get parent regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = 32;
+	data->rcdev.ops = &oxnas_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int oxnas_reset_remove(struct platform_device *pdev)
+{
+	struct oxnas_reset *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static struct platform_driver oxnas_reset_driver = {
+	.probe	= oxnas_reset_probe,
+	.remove	= oxnas_reset_remove,
+	.driver = {
+		.name		= "oxnas-reset",
+		.of_match_table	= oxnas_reset_dt_ids,
+	},
+};
+
+module_platform_driver(oxnas_reset_driver);
-- 
1.9.1

  parent reply	other threads:[~2016-03-09 10:27 UTC|newest]

Thread overview: 92+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-03 11:39 [PATCH 00/17] Add Initial support for PLX Technology OX810SE Neil Armstrong
2016-03-03 11:39 ` [PATCH 01/17] dt-bindings: vendor-prefixes: Add PLX Technology Neil Armstrong
2016-03-03 15:02   ` Philipp Zabel
2016-03-05  4:29     ` Rob Herring
2016-03-07  9:55       ` Philipp Zabel
2016-03-03 11:39 ` [PATCH 02/17] irqchip: Add PLX Technology RPS IRQ Controller Neil Armstrong
2016-03-03 13:01   ` Marc Zyngier
2016-03-03 13:08     ` Arnd Bergmann
2016-03-03 13:36       ` Russell King - ARM Linux
2016-03-03 17:32         ` Arnd Bergmann
2016-03-03 15:32   ` Ma Haijun
2016-03-03 16:56     ` Neil Armstrong
2016-03-03 17:17       ` Marc Zyngier
2016-03-04 11:10         ` Neil Armstrong
2016-03-03 11:39 ` [PATCH 03/17] dt-bindings: Add PLX Technology RPS IRQ Controller bindings Neil Armstrong
2016-03-03 14:53   ` Andrew Lunn
2016-03-03 14:57     ` Neil Armstrong
2016-03-03 15:06       ` Andrew Lunn
2016-03-03 11:39 ` [PATCH 04/17] clocksource: Add PLX Technology RPS Timer Neil Armstrong
2016-03-17 16:13   ` Daniel Lezcano
2016-03-03 11:39 ` [PATCH 05/17] dt-bindings: Add PLX Technology RPS Timer bindings Neil Armstrong
2016-03-03 11:39 ` [PATCH 06/17] reset: Add PLX Technology Reset Controller driver Neil Armstrong
2016-03-03 14:18   ` Philipp Zabel
2016-03-03 14:29     ` Neil Armstrong
2016-03-03 15:00       ` Philipp Zabel
2016-03-03 11:40 ` [PATCH 07/17] dt-bindings: Add PLX Technology Reset Controller bindings Neil Armstrong
2016-03-03 14:21   ` Philipp Zabel
2016-03-03 14:24     ` Neil Armstrong
2016-03-03 14:31       ` Philipp Zabel
2016-03-03 11:40 ` [PATCH 08/17] clk: Add PLX Technology OXNAS Standard Clocks Neil Armstrong
2016-03-04  2:25   ` Stephen Boyd
2016-03-07 11:24     ` Neil Armstrong
2016-03-03 11:40 ` [PATCH 09/17] dt-bindings: Add PLX Technology OXNAS Standard Clocks bindings Neil Armstrong
2016-03-03 11:40 ` [PATCH 10/17] pinctrl: Add PLX Technology OXNAS pinctrl and gpio driver Neil Armstrong
2016-03-15 14:56   ` Linus Walleij
2016-03-16 15:00     ` Neil Armstrong
2016-03-17 14:49       ` Linus Walleij
2016-03-03 11:40 ` [PATCH 11/17] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings Neil Armstrong
2016-03-15 14:30   ` Linus Walleij
2016-03-03 11:40 ` [PATCH 12/17] arm: Add new mach-oxnas Neil Armstrong
2016-03-03 11:49   ` Russell King - ARM Linux
2016-03-03 12:37     ` Neil Armstrong
2016-03-03 12:56   ` Arnd Bergmann
2016-03-03 13:29     ` Russell King - ARM Linux
2016-03-03 13:40       ` Arnd Bergmann
2016-03-03 11:40 ` [PATCH 13/17] arm: Add build support for mach-oxnas Neil Armstrong
2016-03-03 11:40 ` [PATCH 14/17] arm: boot: dts: Add PLX Technology OX810SE dtsi Neil Armstrong
2016-03-03 12:15   ` Arnd Bergmann
2016-03-03 13:39     ` Neil Armstrong
2016-03-03 11:40 ` [PATCH 15/17] dt-bindings: Add OXNAS bindings Neil Armstrong
2016-03-03 11:40 ` [PATCH 16/17] dt-bindings: Add Western Digital to vendor prefixes Neil Armstrong
2016-03-05  4:29   ` Rob Herring
2016-03-03 11:40 ` [PATCH 17/17] arm: boot: dts: Add Western Digital My Book World Edition device tree Neil Armstrong
2016-03-03 12:23 ` [PATCH 00/17] Add Initial support for PLX Technology OX810SE Arnd Bergmann
2016-03-03 12:36   ` Neil Armstrong
2016-03-09 10:24 ` [PATCH v2 00/18] " Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 01/18] clocksource: sp804: Add support for non-32bit width counter Neil Armstrong
2016-03-17 16:40     ` Daniel Lezcano
2016-03-09 10:24   ` [PATCH v2 02/18] dt-bindings: timer: sp804: add timer-width property Neil Armstrong
2016-03-17 17:09     ` Rob Herring
2016-03-17 18:06       ` Robin Murphy
2016-03-17 19:00         ` Rob Herring
2016-03-17 19:21           ` Robin Murphy
2016-03-22  9:21             ` Neil Armstrong
2016-03-22 12:02               ` Robin Murphy
2016-03-22 14:29                 ` Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 03/18] irqchip: versatile-fpga: add new arm,rps-irq compatible Neil Armstrong
2016-03-15 11:47     ` Marc Zyngier
2016-03-09 10:24   ` [PATCH v2 04/18] dt-bindings: irq: arm,versatile-fpga: add arm,rps-irq compatible string Neil Armstrong
2016-03-17 17:15     ` Rob Herring
2016-03-09 10:24   ` [PATCH v2 05/18] dt-bindings: vendor-prefixes: Add PLX Technology Neil Armstrong
2016-03-17 17:15     ` Rob Herring
2016-03-09 10:24   ` [PATCH v2 06/18] dt-bindings: Add Oxford Semiconductors to vendor prefixes Neil Armstrong
2016-03-17 17:16     ` Rob Herring
2016-03-09 10:24   ` Neil Armstrong [this message]
2016-03-09 10:24   ` [PATCH v2 08/18] dt-bindings: Add PLX Technology Reset Controller bindings Neil Armstrong
2016-03-17 17:18     ` Rob Herring
2016-03-09 10:24   ` [PATCH v2 09/18] clk: Add PLX Technology OXNAS Standard Clocks Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 10/18] dt-bindings: Add PLX Technology OXNAS Standard Clocks bindings Neil Armstrong
2016-03-17 17:19     ` Rob Herring
2016-03-09 10:24   ` [PATCH v2 11/18] pinctrl: Add PLX Technology OXNAS pinctrl and gpio driver Neil Armstrong
2016-03-10 14:43     ` kbuild test robot
2016-03-09 10:24   ` [PATCH v2 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings Neil Armstrong
2016-03-17 17:25     ` Rob Herring
2016-03-09 10:24   ` [PATCH v2 13/18] arm: Add new mach-oxnas Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 14/18] arm: Add build support for mach-oxnas Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 15/18] arm: boot: dts: Add PLX Technology OX810SE dtsi Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 16/18] dt-bindings: Add OXNAS bindings Neil Armstrong
2016-03-17 17:27     ` Rob Herring
2016-03-23  8:37       ` Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 17/18] dt-bindings: Add Western Digital to vendor prefixes Neil Armstrong
2016-03-09 10:24   ` [PATCH v2 18/18] arm: boot: dts: Add Western Digital My Book World Edition device tree Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457519060-6038-8-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mahaijuns@gmail.com \
    --cc=p.zabel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome