From: ravishankarkm <ravishankarkm32@gmail.com>
To: greg@kroah.com
Cc: abbotti@mev.co.uk, hsweeten@visionengravers.com,
gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
ravishankarkm <ravishankarkm32@gmail.com>
Subject: [PATCH 1/1] Staging: comedi: fix CHECK issue in ni_tio.c
Date: Wed, 9 Mar 2016 17:05:01 +0530 [thread overview]
Message-ID: <1457523302-21261-1-git-send-email-ravishankarkm32@gmail.com> (raw)
This is a patch to the ni_tio.c file that fixes up a CHECK issues
found by the checkpatch.pl tool.
i.e.Avoid crashing the kernel - try using WARN_ON & recovery code
rather than BUG() or BUG_ON().
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
---
drivers/staging/comedi/drivers/ni_tio.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index b74e44e..1348a75 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -189,7 +189,7 @@ static void ni_tio_reset_count_and_disarm(struct ni_gpct *counter)
static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter,
unsigned generic_clock_source)
{
- uint64_t clock_period_ps;
+ u64 clock_period_ps;
switch (generic_clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK) {
case NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS:
@@ -222,7 +222,7 @@ static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter,
clock_period_ps *= 8;
break;
default:
- BUG();
+ WARN_ON(1);
break;
}
return clock_period_ps;
@@ -304,7 +304,7 @@ static unsigned ni_m_series_clock_src_select(const struct ni_gpct *counter)
}
if (i <= NI_M_MAX_PFI_CHAN)
break;
- BUG();
+ WARN_ON(1);
break;
}
clock_source |= ni_tio_clock_src_modifiers(counter);
@@ -361,7 +361,7 @@ static unsigned ni_660x_clock_src_select(const struct ni_gpct *counter)
}
if (i <= NI_660X_MAX_SRC_PIN)
break;
- BUG();
+ WARN_ON(1);
break;
}
clock_source |= ni_tio_clock_src_modifiers(counter);
@@ -385,9 +385,9 @@ static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync)
struct ni_gpct_device *counter_dev = counter->counter_dev;
unsigned cidx = counter->counter_index;
const unsigned counting_mode_reg = NITIO_CNT_MODE_REG(cidx);
- static const uint64_t min_normal_sync_period_ps = 25000;
+ static const u64 min_normal_sync_period_ps = 25000;
unsigned mode;
- uint64_t clock_period_ps;
+ u64 clock_period_ps;
if (ni_tio_counting_mode_registers_present(counter_dev) == 0)
return;
@@ -584,7 +584,7 @@ static unsigned ni_660x_clk_src(unsigned int clock_source)
if (i <= NI_660X_MAX_SRC_PIN)
break;
ni_660x_clock = 0;
- BUG();
+ WARN_ON(1);
break;
}
return GI_SRC_SEL(ni_660x_clock);
@@ -643,7 +643,7 @@ static unsigned ni_m_clk_src(unsigned int clock_source)
break;
pr_err("invalid clock source 0x%lx\n",
(unsigned long)clock_source);
- BUG();
+ WARN_ON(1);
ni_m_series_clock = 0;
break;
}
@@ -730,7 +730,7 @@ static void ni_tio_get_clock_src(struct ni_gpct *counter,
unsigned int *clock_source,
unsigned int *period_ns)
{
- uint64_t temp64;
+ u64 temp64;
*clock_source = ni_tio_generic_clock_src_select(counter);
temp64 = ni_tio_clock_period_ps(counter, *clock_source);
@@ -946,7 +946,7 @@ int ni_tio_set_gate_src(struct ni_gpct *counter, unsigned gate_index,
case ni_gpct_variant_660x:
return ni_660x_set_gate2(counter, gate_source);
default:
- BUG();
+ WARN_ON(1);
break;
}
break;
@@ -1015,7 +1015,7 @@ static unsigned ni_660x_gate_to_generic_gate(unsigned gate)
if (gate == NI_660X_PIN_GATE_SEL(i))
return NI_GPCT_GATE_PIN_GATE_SELECT(i);
}
- BUG();
+ WARN_ON(1);
break;
}
return 0;
@@ -1051,7 +1051,7 @@ static unsigned ni_m_gate_to_generic_gate(unsigned gate)
if (gate == NI_M_PFI_GATE_SEL(i))
return NI_GPCT_PFI_GATE_SELECT(i);
}
- BUG();
+ WARN_ON(1);
break;
}
return 0;
@@ -1083,7 +1083,7 @@ static unsigned ni_660x_gate2_to_generic_gate(unsigned gate)
if (gate == NI_660X_UD_PIN_GATE2_SEL(i))
return NI_GPCT_UP_DOWN_PIN_GATE_SELECT(i);
}
- BUG();
+ WARN_ON(1);
break;
}
return 0;
@@ -1119,7 +1119,7 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
}
gate = GI_BITS_TO_GATE(ni_tio_get_soft_copy(counter,
- NITIO_INPUT_SEL_REG(cidx)));
+ NITIO_INPUT_SEL_REG(cidx)));
switch (counter_dev->variant) {
case ni_gpct_variant_e_series:
--
1.9.1
next reply other threads:[~2016-03-09 11:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 11:35 ravishankarkm [this message]
2016-03-09 11:35 ` [PATCH 2/2] Staging: comedi: fix type " ravishankarkm
2016-03-09 12:09 ` [PATCH 1/1] Staging: comedi: fix CHECK " Ian Abbott
2016-03-09 15:25 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457523302-21261-1-git-send-email-ravishankarkm32@gmail.com \
--to=ravishankarkm32@gmail.com \
--cc=abbotti@mev.co.uk \
--cc=greg@kroah.com \
--cc=gregkh@linuxfoundation.org \
--cc=hsweeten@visionengravers.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®