From: Ian Abbott <abbotti@mev.co.uk>
To: ravishankarkm <ravishankarkm32@gmail.com>, greg@kroah.com
Cc: hsweeten@visionengravers.com, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] Staging: comedi: fix CHECK issue in ni_tio.c
Date: Wed, 9 Mar 2016 12:09:05 +0000 [thread overview]
Message-ID: <56E01261.6070600@mev.co.uk> (raw)
In-Reply-To: <1457523302-21261-1-git-send-email-ravishankarkm32@gmail.com>
On 09/03/16 11:35, ravishankarkm wrote:
> This is a patch to the ni_tio.c file that fixes up a CHECK issues
> found by the checkpatch.pl tool.
>
> i.e.Avoid crashing the kernel - try using WARN_ON & recovery code
> rather than BUG() or BUG_ON().
>
> Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
> ---
> drivers/staging/comedi/drivers/ni_tio.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
I guess this should be PATCH 1/2, not PATCH 1/1?
> diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
> index b74e44e..1348a75 100644
> --- a/drivers/staging/comedi/drivers/ni_tio.c
> +++ b/drivers/staging/comedi/drivers/ni_tio.c
> @@ -189,7 +189,7 @@ static void ni_tio_reset_count_and_disarm(struct ni_gpct *counter)
> static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter,
> unsigned generic_clock_source)
> {
> - uint64_t clock_period_ps;
> + u64 clock_period_ps;
This change from uint64_t to u64 comes from your PATCH 2/2, but it has
got mixed into this patch too. That makes it impossible to apply both
of your patches.
>
> switch (generic_clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK) {
> case NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS:
> @@ -222,7 +222,7 @@ static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter,
> clock_period_ps *= 8;
> break;
> default:
> - BUG();
> + WARN_ON(1);
These BUG() to WARN_ON(1) changes are good.
> break;
> }
> return clock_period_ps;
> @@ -304,7 +304,7 @@ static unsigned ni_m_series_clock_src_select(const struct ni_gpct *counter)
> }
> if (i <= NI_M_MAX_PFI_CHAN)
> break;
> - BUG();
> + WARN_ON(1);
> break;
> }
> clock_source |= ni_tio_clock_src_modifiers(counter);
> @@ -361,7 +361,7 @@ static unsigned ni_660x_clock_src_select(const struct ni_gpct *counter)
> }
> if (i <= NI_660X_MAX_SRC_PIN)
> break;
> - BUG();
> + WARN_ON(1);
> break;
> }
> clock_source |= ni_tio_clock_src_modifiers(counter);
> @@ -385,9 +385,9 @@ static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync)
> struct ni_gpct_device *counter_dev = counter->counter_dev;
> unsigned cidx = counter->counter_index;
> const unsigned counting_mode_reg = NITIO_CNT_MODE_REG(cidx);
> - static const uint64_t min_normal_sync_period_ps = 25000;
> + static const u64 min_normal_sync_period_ps = 25000;
> unsigned mode;
> - uint64_t clock_period_ps;
> + u64 clock_period_ps;
>
> if (ni_tio_counting_mode_registers_present(counter_dev) == 0)
> return;
> @@ -584,7 +584,7 @@ static unsigned ni_660x_clk_src(unsigned int clock_source)
> if (i <= NI_660X_MAX_SRC_PIN)
> break;
> ni_660x_clock = 0;
> - BUG();
> + WARN_ON(1);
> break;
> }
> return GI_SRC_SEL(ni_660x_clock);
> @@ -643,7 +643,7 @@ static unsigned ni_m_clk_src(unsigned int clock_source)
> break;
> pr_err("invalid clock source 0x%lx\n",
> (unsigned long)clock_source);
> - BUG();
> + WARN_ON(1);
> ni_m_series_clock = 0;
> break;
> }
> @@ -730,7 +730,7 @@ static void ni_tio_get_clock_src(struct ni_gpct *counter,
> unsigned int *clock_source,
> unsigned int *period_ns)
> {
> - uint64_t temp64;
> + u64 temp64;
>
> *clock_source = ni_tio_generic_clock_src_select(counter);
> temp64 = ni_tio_clock_period_ps(counter, *clock_source);
> @@ -946,7 +946,7 @@ int ni_tio_set_gate_src(struct ni_gpct *counter, unsigned gate_index,
> case ni_gpct_variant_660x:
> return ni_660x_set_gate2(counter, gate_source);
> default:
> - BUG();
> + WARN_ON(1);
> break;
> }
> break;
> @@ -1015,7 +1015,7 @@ static unsigned ni_660x_gate_to_generic_gate(unsigned gate)
> if (gate == NI_660X_PIN_GATE_SEL(i))
> return NI_GPCT_GATE_PIN_GATE_SELECT(i);
> }
> - BUG();
> + WARN_ON(1);
> break;
> }
> return 0;
> @@ -1051,7 +1051,7 @@ static unsigned ni_m_gate_to_generic_gate(unsigned gate)
> if (gate == NI_M_PFI_GATE_SEL(i))
> return NI_GPCT_PFI_GATE_SELECT(i);
> }
> - BUG();
> + WARN_ON(1);
> break;
> }
> return 0;
> @@ -1083,7 +1083,7 @@ static unsigned ni_660x_gate2_to_generic_gate(unsigned gate)
> if (gate == NI_660X_UD_PIN_GATE2_SEL(i))
> return NI_GPCT_UP_DOWN_PIN_GATE_SELECT(i);
> }
> - BUG();
> + WARN_ON(1);
> break;
> }
> return 0;
> @@ -1119,7 +1119,7 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
> }
>
> gate = GI_BITS_TO_GATE(ni_tio_get_soft_copy(counter,
> - NITIO_INPUT_SEL_REG(cidx)));
> + NITIO_INPUT_SEL_REG(cidx)));
There is no need for the patch to adjust the whitespace on that line.
Ideally, the 'NITIO_INPUT_SEL_REG(cidx)' should line up with 'counter'
on the previous line, but that would take the line over 80 characters.
The current amount of whitespace is a compromise, but there is no need
to change it.
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Web: http://www.mev.co.uk/ )=-
next prev parent reply other threads:[~2016-03-09 12:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-09 11:35 ravishankarkm
2016-03-09 11:35 ` [PATCH 2/2] Staging: comedi: fix type " ravishankarkm
2016-03-09 12:09 ` Ian Abbott [this message]
2016-03-09 15:25 ` [PATCH 1/1] Staging: comedi: fix CHECK " Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56E01261.6070600@mev.co.uk \
--to=abbotti@mev.co.uk \
--cc=greg@kroah.com \
--cc=gregkh@linuxfoundation.org \
--cc=hsweeten@visionengravers.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ravishankarkm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®