From: Parth Sane <laerdevstudios@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, florian.c.schilhabel@googlemail.com,
luisbg@osg.samsung.com, punitvara@gmail.com,
stillcompiling@gmail.com, bhaktipriya96@gmail.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Parth Sane <laerdevstudios@gmail.com>
Subject: [PATCH] staging: rtl8712: Fixed multiple parenthesis alignment warnings in ieee80211.c
Date: Wed, 8 Jun 2016 16:57:45 +0530 [thread overview]
Message-ID: <1465385265-25558-1-git-send-email-laerdevstudios@gmail.com> (raw)
Multiple parenthesis alignment warnings were thrown by checkpatch in ieee80211.c
This patch effectively fixes that.
Signed-off-by: Parth Sane <laerdevstudios@gmail.com>
---
drivers/staging/rtl8712/ieee80211.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8712/ieee80211.c b/drivers/staging/rtl8712/ieee80211.c
index 8918654..5dc3b5b 100644
--- a/drivers/staging/rtl8712/ieee80211.c
+++ b/drivers/staging/rtl8712/ieee80211.c
@@ -145,7 +145,7 @@ static void set_supported_rate(u8 *rates, uint mode)
case WIRELESS_11BG:
memcpy(rates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
memcpy(rates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES,
- IEEE80211_NUM_OFDM_RATESLEN);
+ IEEE80211_NUM_OFDM_RATESLEN);
break;
}
}
@@ -188,24 +188,24 @@ int r8712_generate_ie(struct registry_priv *pregistrypriv)
ie += 2;
/*SSID*/
ie = r8712_set_ie(ie, _SSID_IE_, pdev_network->Ssid.SsidLength,
- pdev_network->Ssid.Ssid, &sz);
+ pdev_network->Ssid.Ssid, &sz);
/*supported rates*/
set_supported_rate(pdev_network->rates, pregistrypriv->wireless_mode);
rateLen = r8712_get_rateset_len(pdev_network->rates);
if (rateLen > 8) {
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_, 8,
- pdev_network->rates, &sz);
+ pdev_network->rates, &sz);
ie = r8712_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8),
- (pdev_network->rates + 8), &sz);
+ (pdev_network->rates + 8), &sz);
} else
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_,
- rateLen, pdev_network->rates, &sz);
+ rateLen, pdev_network->rates, &sz);
/*DS parameter set*/
ie = r8712_set_ie(ie, _DSSET_IE_, 1,
- (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
+ (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
/*IBSS Parameter Set*/
ie = r8712_set_ie(ie, _IBSS_PARA_IE_, 2,
- (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
+ (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
return sz;
}
@@ -220,8 +220,7 @@ unsigned char *r8712_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit)
pbuf = r8712_get_ie(pbuf, _WPA_IE_ID_, &len, limit);
if (pbuf) {
/*check if oui matches...*/
- if (memcmp((pbuf + 2), wpa_oui_type,
- sizeof(wpa_oui_type)))
+ if (memcmp((pbuf + 2), wpa_oui_type, sizeof(wpa_oui_type)))
goto check_next_ie;
/*check version...*/
memcpy((u8 *)&val16, (pbuf + 6), sizeof(val16));
@@ -279,7 +278,7 @@ static int r8712_get_wpa2_cipher_suite(u8 *s)
}
int r8712_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
- int *pairwise_cipher)
+ int *pairwise_cipher)
{
int i;
int left, count;
@@ -322,7 +321,7 @@ int r8712_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
}
int r8712_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher,
- int *pairwise_cipher)
+ int *pairwise_cipher)
{
int i;
int left, count;
@@ -365,7 +364,7 @@ int r8712_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher,
}
int r8712_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
- u8 *wpa_ie, u16 *wpa_len)
+ u8 *wpa_ie, u16 *wpa_len)
{
u8 authmode;
u8 wpa_oui[4] = {0x0, 0x50, 0xf2, 0x01};
@@ -383,7 +382,7 @@ int r8712_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
} else {
if (authmode == _WPA2_IE_ID_) {
memcpy(rsn_ie, &in_ie[cnt],
- in_ie[cnt + 1] + 2);
+ in_ie[cnt + 1] + 2);
*rsn_len = in_ie[cnt + 1] + 2;
cnt += in_ie[cnt + 1] + 2; /*get next*/
} else {
--
1.9.1
next reply other threads:[~2016-06-08 11:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 11:27 Parth Sane [this message]
2016-06-08 11:31 ` Luis de Bethencourt
2016-06-08 11:37 ` Parth Sane
[not found] ` <5758064E.6080709@osg.samsung.com>
2016-06-08 11:58 ` Parth Sane
[not found] ` <57580C8B.6040204@osg.samsung.com>
2016-06-08 12:25 ` Parth Sane
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465385265-25558-1-git-send-email-laerdevstudios@gmail.com \
--to=laerdevstudios@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bhaktipriya96@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=florian.c.schilhabel@googlemail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luisbg@osg.samsung.com \
--cc=punitvara@gmail.com \
--cc=stillcompiling@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®