From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: rtc-linux@googlegroups.com
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
linux-kernel@vger.kernel.org, cphealy@gmail.com
Subject: [PATCH v2 13/17] RTC: ds1307: Report oscillator problems more intelligently
Date: Tue, 21 Jun 2016 00:22:46 -0700 [thread overview]
Message-ID: <1466493770-11895-12-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1466493770-11895-1-git-send-email-andrew.smirnov@gmail.com>
Report oscillator problems more intelligently, by printing more
information about what cause the issue and not yelling "SET TIME!" at
the user.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/rtc/rtc-ds1307.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 2af9c00..2169e5b 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1424,6 +1424,19 @@ static int ds1307_chip_configure(const struct ds1307 *ds1307)
return 0;
}
+static void ds1307_report_clock_halt(const struct ds1307 *ds1307)
+{
+ dev_warn(&ds1307->client->dev, "RTC's oscillator is turned off. "
+ "Turning it on. Please set time");
+}
+
+static void ds1307_report_oscillator_fault(const struct ds1307 *ds1307)
+{
+ dev_warn(&ds1307->client->dev, "RTC's reported oscillator fault. "
+ "Clearing the fault flag and re-reading RTC status. "
+ "Please set time");
+}
+
static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
{
int tmp, retries;
@@ -1453,7 +1466,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
if (tmp & DS1307_BIT_CH) {
i2c_smbus_write_byte_data(client,
DS1307_REG_SECS, 0);
- dev_warn(&client->dev, "SET TIME!\n");
+ ds1307_report_clock_halt(ds1307);
continue;
}
break;
@@ -1469,15 +1482,17 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
DS1307_REG_CONTROL,
regs[DS1307_REG_CONTROL]
& ~DS1338_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
+ ds1307_report_oscillator_fault(ds1307);
continue;
}
break;
case ds_1340:
/* clock halted? turn it on, so clock can tick. */
- if (tmp & DS1340_BIT_nEOSC)
+ if (tmp & DS1340_BIT_nEOSC) {
i2c_smbus_write_byte_data(client,
DS1307_REG_SECS, 0);
+ ds1307_report_clock_halt(ds1307);
+ }
tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
if (tmp < 0) {
@@ -1489,7 +1504,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
if (tmp & DS1340_BIT_OSF) {
i2c_smbus_write_byte_data(client,
DS1340_REG_FLAG, 0);
- dev_warn(&client->dev, "SET TIME!\n");
+ ds1307_report_oscillator_fault(ds1307);
}
return 0;
@@ -1500,6 +1515,9 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
DS1307_REG_WDAY,
regs[DS1307_REG_WDAY]
| MCP794XX_BIT_VBATEN);
+ dev_warn(&client->dev,
+ "battery backup was disabled. "
+ "Re-enabling it\n");
}
/* clock halted? turn it on, so clock can tick. */
@@ -1507,7 +1525,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
i2c_smbus_write_byte_data(client,
DS1307_REG_SECS,
MCP794XX_BIT_ST);
- dev_warn(&client->dev, "SET TIME!\n");
+ ds1307_report_clock_halt(ds1307);
continue;
}
--
2.5.5
next prev parent reply other threads:[~2016-06-21 7:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 7:22 [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 03/17] RTC: ds1307: Add devicetree bindings for DS1341 Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 04/17] RTC: ds1307: Add DS1341 specific power-saving options Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 05/17] RTC: ds1307: Convert ds1307_can_wakeup_device into a predicate Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 06/17] RTC: ds1307: Convert want_irq " Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 07/17] RTC: ds1307: Move chip configuration into a separate routine Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 08/17] RTC: ds1307: Move chip sanity checking " Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 09/17] RTC: ds1307: Remove register "cache" Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 10/17] RTC: ds1307: Constify struct ds1307 where possible Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 11/17] RTC: ds1307: Convert goto to a loop Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 12/17] RTC: ds1307: Redefine RX8025_REG_* to minimize extra code Andrey Smirnov
2016-06-21 7:22 ` Andrey Smirnov [this message]
2016-06-21 21:22 ` [PATCH v2 13/17] RTC: ds1307: Report oscillator problems more intelligently Alexandre Belloni
2016-06-21 23:06 ` Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 14/17] RTC: ds1307: Move last bits of sanity checking out of chip_configure Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 15/17] RTC: rtctest: Change alarm IRQ support detection Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 16/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_READ Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 17/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_SET Andrey Smirnov
2016-06-21 21:17 ` [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Alexandre Belloni
2016-06-21 23:43 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466493770-11895-12-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=cphealy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®