From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: rtc-linux@googlegroups.com
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
linux-kernel@vger.kernel.org, cphealy@gmail.com
Subject: [PATCH v2 05/17] RTC: ds1307: Convert ds1307_can_wakeup_device into a predicate
Date: Tue, 21 Jun 2016 00:22:38 -0700 [thread overview]
Message-ID: <1466493770-11895-4-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1466493770-11895-1-git-send-email-andrew.smirnov@gmail.com>
Convert ds1307_can_wakeup_device in ds1307_probe into a predicate in
order to make various chunks of code in that function less connected to
each other.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/rtc/rtc-ds1307.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index b21ea5d..98e1f81 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1232,6 +1232,21 @@ static void ds1307_clks_register(struct ds1307 *ds1307)
#endif /* CONFIG_COMMON_CLK */
+static bool ds1307_can_wakeup_device(const struct ds1307 *ds1307)
+{
+
+/*
+ * For devices with no IRQ directly connected to the SoC, the RTC chip
+ * can be forced as a wakeup source by stating that explicitly in
+ * the device's .dts file using the "wakeup-source" boolean property.
+ * If the "wakeup-source" property is set, don't request an IRQ.
+ * This will guarantee the 'wakealarm' sysfs entry is available on the device,
+ * if supported by the RTC.
+ */
+ return of_property_read_bool(ds1307->client->dev.of_node,
+ "wakeup-source");
+}
+
static int ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1241,7 +1256,6 @@ static int ds1307_probe(struct i2c_client *client,
struct chip_desc *chip = &chips[id->driver_data];
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
bool want_irq = false;
- bool ds1307_can_wakeup_device = false;
unsigned char *buf;
struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
irq_handler_t irq_handler = ds1307_irq;
@@ -1290,20 +1304,6 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->write_block_data = ds1307_write_block_data;
}
-#ifdef CONFIG_OF
-/*
- * For devices with no IRQ directly connected to the SoC, the RTC chip
- * can be forced as a wakeup source by stating that explicitly in
- * the device's .dts file using the "wakeup-source" boolean property.
- * If the "wakeup-source" property is set, don't request an IRQ.
- * This will guarantee the 'wakealarm' sysfs entry is available on the device,
- * if supported by the RTC.
- */
- if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
- ds1307_can_wakeup_device = true;
- }
-#endif
-
switch (ds1307->type) {
case ds_1337:
case ds_1339:
@@ -1357,7 +1357,7 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
if (chip->alarm && (ds1307->client->irq > 0 ||
- ds1307_can_wakeup_device))
+ ds1307_can_wakeup_device(ds1307)))
want_irq = true;
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
@@ -1567,7 +1567,8 @@ read_rtc:
return PTR_ERR(ds1307->rtc);
}
- if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
+ if (ds1307_can_wakeup_device(ds1307) &&
+ ds1307->client->irq <= 0) {
/* Disable request for an IRQ */
want_irq = false;
dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
--
2.5.5
next prev parent reply other threads:[~2016-06-21 7:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 7:22 [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 03/17] RTC: ds1307: Add devicetree bindings for DS1341 Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 04/17] RTC: ds1307: Add DS1341 specific power-saving options Andrey Smirnov
2016-06-21 7:22 ` Andrey Smirnov [this message]
2016-06-21 7:22 ` [PATCH v2 06/17] RTC: ds1307: Convert want_irq into a predicate Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 07/17] RTC: ds1307: Move chip configuration into a separate routine Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 08/17] RTC: ds1307: Move chip sanity checking " Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 09/17] RTC: ds1307: Remove register "cache" Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 10/17] RTC: ds1307: Constify struct ds1307 where possible Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 11/17] RTC: ds1307: Convert goto to a loop Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 12/17] RTC: ds1307: Redefine RX8025_REG_* to minimize extra code Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 13/17] RTC: ds1307: Report oscillator problems more intelligently Andrey Smirnov
2016-06-21 21:22 ` Alexandre Belloni
2016-06-21 23:06 ` Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 14/17] RTC: ds1307: Move last bits of sanity checking out of chip_configure Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 15/17] RTC: rtctest: Change alarm IRQ support detection Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 16/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_READ Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 17/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_SET Andrey Smirnov
2016-06-21 21:17 ` [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Alexandre Belloni
2016-06-21 23:43 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466493770-11895-4-git-send-email-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=cphealy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®