[RFC][PATCH 00/10 v2] Add HDMI audio support for HiKey

[John Stultz <john.stultz@linaro.org>]

This patch set is required for HDMI audio support on HiKey.

This version tries to address issues and adopt suggestions from
Mark Brown. I've split up the ASoC patches into i2s and codec
components, and done some major rework of those two patches.

The k3dma patches are mostly the same, with some minor tweaks
in the debug output suggested by Zhangfei.

I've also added draft dt bindings. Though I suspect they will
need more tweaks.

Again, the work is mostly that of Andy Green's, but I've taking
a swing at forward porting and cleaning it up where I saw fit.
So credit to Andy and blame to me. Apologies in advance, as I'm
not super familiar with either DMA or ASoC driver.

The one bit missing to have audio fully working is changes to the
adv7511 driver, but most of those changes are still out of tree, so
I'll submit those changes once they land.

Feedback would be very much appreicated!

thanks
-john

Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>

Andy Green (5):
  k3dma: Fix hisi burst clipping
  k3dma: Fix dma err offsets
  k3dma: Fix "nobody cared" message seen on any error
  k3dma: Add cyclic mode for audio
  ASoC: hisilicon: Add hi6210 i2s audio driver

John Stultz (5):
  Kconfig: Allow k3dma driver to be selected for more then HISI3xx
    platforms
  ASoC: add hi6210-i2s  DT bindings
  ASoC: add hi6210-hdmi-audio-codec  DT bindings
  ASoC: hisilicon: Add hi6210 hdmi codec driver
  dts: hi6220: Add k3-dma and i2s/hdmi audio support

 .../sound/hisilicon,hi6210-hdmi-audio-codec.txt    |  12 +
 .../bindings/sound/hisilicon,hi6210-i2s.txt        |  36 ++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  22 +
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi          |  31 +
 drivers/dma/Kconfig                                |   2 +-
 drivers/dma/k3dma.c                                | 137 ++++-
 sound/soc/Kconfig                                  |   1 +
 sound/soc/Makefile                                 |   1 +
 sound/soc/hisilicon/Kconfig                        |   5 +
 sound/soc/hisilicon/Makefile                       |   2 +
 sound/soc/hisilicon/hi6210-hdmi-codec.c            |  68 +++
 sound/soc/hisilicon/hi6210-i2s.c                   | 678 +++++++++++++++++++++
 sound/soc/hisilicon/hi6210-i2s.h                   | 276 +++++++++
 13 files changed, 1250 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/hisilicon,hi6210-hdmi-audio-codec.txt
 create mode 100644 Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt
 create mode 100644 sound/soc/hisilicon/Kconfig
 create mode 100644 sound/soc/hisilicon/Makefile
 create mode 100644 sound/soc/hisilicon/hi6210-hdmi-codec.c
 create mode 100644 sound/soc/hisilicon/hi6210-i2s.c
 create mode 100644 sound/soc/hisilicon/hi6210-i2s.h

-- 
1.9.1