* [PATCH v11 1/5] usb: dwc3: of-simple: add compatible for rockchip rk3399
2016-08-16 14:44 [PATCH v11 0/5] support rockchip dwc3 driver William Wu
@ 2016-08-16 14:44 ` William Wu
2016-08-16 14:44 ` [PATCH v11 2/5] usb: dwc3: add dis_u2_freeclk_exists_quirk William Wu
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: William Wu @ 2016-08-16 14:44 UTC (permalink / raw)
To: gregkh, balbi, heiko
Cc: linux-rockchip, briannorris, dianders, kever.yang, huangtao,
frank.wang, eddie.cai, John.Youn, linux-kernel, linux-usb,
sergei.shtylyov, robh+dt, mark.rutland, devicetree, zhengsq, zyw,
William Wu
Rockchip platform merely enable usb3 clocks and
populate its children. So we can use this generic
glue layer to support Rockchip dwc3.
Signed-off-by: William Wu <william.wu@rock-chips.com>
---
Changes in v11:
- add compatible in dwc3-of-simple.c, and remove dwc3-rockchip.c (balbi)
Changes in v10:
- None
Changes in v9:
- remove compatible from dwc3-of-simple.c, and add a new glue layer dwc3-rockchip.c
Changes in v8:
- None
Changes in v7:
- None
Changes in v6:
- None
Changes in v5:
- change compatible from "rockchip,dwc3" to "rockchip,rk3399-dwc3" (Heiko)
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- sort the list of_dwc3_simple_match (Doug)
drivers/usb/dwc3/dwc3-of-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index e56d59b..283f998 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -162,6 +162,7 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "qcom,dwc3" },
+ { .compatible = "rockchip,rk3399-dwc3" },
{ .compatible = "xlnx,zynqmp-dwc3" },
{ /* Sentinel */ }
};
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v11 2/5] usb: dwc3: add dis_u2_freeclk_exists_quirk
2016-08-16 14:44 [PATCH v11 0/5] support rockchip dwc3 driver William Wu
2016-08-16 14:44 ` [PATCH v11 1/5] usb: dwc3: of-simple: add compatible for rockchip rk3399 William Wu
@ 2016-08-16 14:44 ` William Wu
2016-08-16 14:44 ` [PATCH v11 3/5] usb: dwc3: make usb2 phy utmi interface configurable William Wu
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: William Wu @ 2016-08-16 14:44 UTC (permalink / raw)
To: gregkh, balbi, heiko
Cc: linux-rockchip, briannorris, dianders, kever.yang, huangtao,
frank.wang, eddie.cai, John.Youn, linux-kernel, linux-usb,
sergei.shtylyov, robh+dt, mark.rutland, devicetree, zhengsq, zyw,
William Wu
Add a quirk to clear the GUSB2PHYCFG.U2_FREECLK_EXISTS bit,
which specifies whether the USB2.0 PHY provides a free-running
PHY clock, which is active when the clock control input is active.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v11:
- None
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- add Acked-by (Rob Herring)
Changes in v7:
- None
Changes in v6:
- use '-' instead of '_' in dts (Rob Herring)
Changes in v5:
- None
Changes in v4:
- rebase on top of balbi testing/next, remove pdata (balbi)
Changes in v3:
- None
Changes in v2:
- None
Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 5 +++++
3 files changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 7d7ce08..020b0e9 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -39,6 +39,9 @@ Optional properties:
disabling the suspend signal to the PHY.
- snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
in PHY P3 power state.
+ - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
+ in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
+ a free-running PHY clock.
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 35d0924..14316e5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -500,6 +500,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_enblslpm_quirk)
reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_u2_freeclk_exists_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
+
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
return 0;
@@ -924,6 +927,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_enblslpm_quirk");
dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
"snps,dis_rxdet_inp3_quirk");
+ dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
+ "snps,dis-u2-freeclk-exists-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1a6cc48..08ed9e0 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -199,6 +199,7 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
@@ -803,6 +804,9 @@ struct dwc3_scratchpad_array {
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
* disabling the suspend signal to the PHY.
+ * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
+ * in GUSB2PHYCFG, specify that USB2 PHY doesn't
+ * provide a free-running PHY clock.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -946,6 +950,7 @@ struct dwc3 {
unsigned dis_u2_susphy_quirk:1;
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
+ unsigned dis_u2_freeclk_exists_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v11 3/5] usb: dwc3: make usb2 phy utmi interface configurable
2016-08-16 14:44 [PATCH v11 0/5] support rockchip dwc3 driver William Wu
2016-08-16 14:44 ` [PATCH v11 1/5] usb: dwc3: of-simple: add compatible for rockchip rk3399 William Wu
2016-08-16 14:44 ` [PATCH v11 2/5] usb: dwc3: add dis_u2_freeclk_exists_quirk William Wu
@ 2016-08-16 14:44 ` William Wu
2016-08-16 14:44 ` [PATCH v11 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk William Wu
2016-08-16 14:46 ` [PATCH v11 5/5] usb: dwc3: rockchip: add devicetree bindings documentation William Wu
4 siblings, 0 replies; 6+ messages in thread
From: William Wu @ 2016-08-16 14:44 UTC (permalink / raw)
To: gregkh, balbi, heiko
Cc: linux-rockchip, briannorris, dianders, kever.yang, huangtao,
frank.wang, eddie.cai, John.Youn, linux-kernel, linux-usb,
sergei.shtylyov, robh+dt, mark.rutland, devicetree, zhengsq, zyw,
William Wu
Support to configure the UTMI+ PHY with an 8- or 16-bit
interface via DT. The UTMI+ PHY interface is a hardware
capability, and it's platform dependent. Normally, the
PHYIF can be configured during coreconsultant.
But for some specific USB cores(e.g. rk3399 SoC DWC3),
the default PHYIF configuration value is false, so we
need to reconfigure it by software.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v11:
- None
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- configure utmi interface via phy_type property in DT (Heiko, Rob Herring)
- add Acked-by (Rob Herring)
- modify commit message (Rob Herring)
Changes in v7:
- remove quirk and use only one property to configure utmi (Heiko, Rob Herring)
Changes in v6:
- use '-' instead of '_' in dts (Rob Herring)
Changes in v5:
- None
Changes in v4:
- rebase on top of balbi testing/next, remove pdata (balbi)
Changes in v3:
- None
Changes in v2:
- add a quirk for phyif_utmi (balbi)
Documentation/devicetree/bindings/usb/generic.txt | 6 ++++++
drivers/usb/dwc3/core.c | 18 ++++++++++++++++++
drivers/usb/dwc3/core.h | 12 ++++++++++++
3 files changed, 36 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index bba8257..bfadeb1 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -11,6 +11,11 @@ Optional properties:
"peripheral" and "otg". In case this attribute isn't
passed via DT, USB DRD controllers should default to
OTG.
+ - phy_type: tells USB controllers that we want to configure the core to support
+ a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
+ selected. Valid arguments are "utmi" and "utmi_wide".
+ In case this isn't passed via DT, USB controllers should
+ default to HW capability.
- otg-rev: tells usb driver the release number of the OTG and EH supplement
with which the device and its descriptors are compliant,
in binary-coded decimal (i.e. 2.0 is 0200H). This
@@ -34,6 +39,7 @@ dwc3@4a030000 {
usb-phy = <&usb2_phy>, <&usb3,phy>;
maximum-speed = "super-speed";
dr_mode = "otg";
+ phy_type = "utmi_wide";
otg-rev = <0x0200>;
adp-disable;
};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 14316e5..cdac019 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -485,6 +485,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
break;
}
+ switch (dwc->hsphy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
+ break;
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
+ break;
+ default:
+ break;
+ }
+
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
@@ -891,6 +908,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
+ dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
dwc->has_lpm_erratum = device_property_read_bool(dev,
"snps,has-lpm-erratum");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 08ed9e0..cc4f551 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -203,6 +203,14 @@
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define USBTRDTIM_UTMI_16_BIT 5
+#define UTMI_PHYIF_16_BIT 1
+#define UTMI_PHYIF_8_BIT 0
/* Global USB2 PHY Vendor Control Register */
#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
@@ -748,6 +756,9 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @hsphy_mode: UTMI phy mode, one of following:
+ * - USBPHY_INTERFACE_MODE_UTMI
+ * - USBPHY_INTERFACE_MODE_UTMIW
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -853,6 +864,7 @@ struct dwc3 {
size_t regs_size;
enum usb_dr_mode dr_mode;
+ enum usb_phy_interface hsphy_mode;
u32 fladj;
u32 irq_gadget;
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v11 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk
2016-08-16 14:44 [PATCH v11 0/5] support rockchip dwc3 driver William Wu
` (2 preceding siblings ...)
2016-08-16 14:44 ` [PATCH v11 3/5] usb: dwc3: make usb2 phy utmi interface configurable William Wu
@ 2016-08-16 14:44 ` William Wu
2016-08-16 14:46 ` [PATCH v11 5/5] usb: dwc3: rockchip: add devicetree bindings documentation William Wu
4 siblings, 0 replies; 6+ messages in thread
From: William Wu @ 2016-08-16 14:44 UTC (permalink / raw)
To: gregkh, balbi, heiko
Cc: linux-rockchip, briannorris, dianders, kever.yang, huangtao,
frank.wang, eddie.cai, John.Youn, linux-kernel, linux-usb,
sergei.shtylyov, robh+dt, mark.rutland, devicetree, zhengsq, zyw,
William Wu
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v11:
- None
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- add Acked-by (Rob Herring)
Changes in v7:
- None
Changes in v6:
- use '-' instead of '_' in dts (Rob Herring)
Changes in v5:
- None
Changes in v4:
- rebase on top of balbi testing/next, remove pdata (balbi)
Changes in v3:
- None
Changes in v2:
- None
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 3 +++
3 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 020b0e9..e96bfc2 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -42,6 +42,8 @@ Optional properties:
- snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
a free-running PHY clock.
+ - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
+ from P0 to P1/P2/P3 without delay.
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index cdac019..e887b38 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -448,6 +448,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -947,6 +950,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_rxdet_inp3_quirk");
dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
"snps,dis-u2-freeclk-exists-quirk");
+ dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+ "snps,dis-del-phy-power-chg-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index cc4f551..3d94acd 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -818,6 +818,8 @@ struct dwc3_scratchpad_array {
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
* provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -963,6 +965,7 @@ struct dwc3 {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v11 5/5] usb: dwc3: rockchip: add devicetree bindings documentation
2016-08-16 14:44 [PATCH v11 0/5] support rockchip dwc3 driver William Wu
` (3 preceding siblings ...)
2016-08-16 14:44 ` [PATCH v11 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk William Wu
@ 2016-08-16 14:46 ` William Wu
4 siblings, 0 replies; 6+ messages in thread
From: William Wu @ 2016-08-16 14:46 UTC (permalink / raw)
To: gregkh, balbi, heiko
Cc: linux-rockchip, briannorris, dianders, kever.yang, huangtao,
frank.wang, eddie.cai, John.Youn, linux-kernel, linux-usb,
sergei.shtylyov, robh+dt, mark.rutland, devicetree, zhengsq, zyw,
William Wu
This patch adds the devicetree documentation required for Rockchip
USB3.0 core wrapper consisting of USB3.0 IP from Synopsys.
It supports DRD mode, and could operate in device mode (SS, HS, FS)
and host mode (SS, HS, FS, LS).
Signed-off-by: William Wu <william.wu@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v11:
- remove required properties "resets" and "reset-names"
- remove optional property "extcon"
Changes in v10:
- None
Changes in v9:
- add required properties "resets" and "reset-names"
- add optional property "extcon"
Changes in v8:
- None
Changes in v7:
- add Acked-by (Rob Herring)
Changes in v6:
- rename bus_clk, and add usbdrd3_1 node as an example (Heiko)
Changes in v5:
- rename clock-names, and remove unnecessary clocks (Heiko)
Changes in v4:
- modify commit log, and add phy documentation location (Sergei)
Changes in v3:
- add dwc3 address (balbi)
Changes in v2:
- add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (balbi, Brian)
.../devicetree/bindings/usb/rockchip,dwc3.txt | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
new file mode 100644
index 0000000..0536a93
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -0,0 +1,59 @@
+Rockchip SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "ref_clk" Controller reference clk, have to be 24 MHz
+ "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
+ "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS
+ operation and >= 30MHz for HS operation
+ "grf_clk" Controller grf clk
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+
+Example device nodes:
+
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ usbdrd_dwc3_0: dwc3@fe800000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
+
+ usbdrd3_1: usb@fe900000 {
+ compatible = "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ usbdrd_dwc3_1: dwc3@fe900000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe900000 0x0 0x100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread