mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Christopher Covington <cov@codeaurora.org>,
	Prashanth Prakash <pprakash@codeaurora.org>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>
Subject: [PATCH v2] irqchip/gicv3: remove disabling redistributor and group1 non-secure interrupts
Date: Wed, 17 Aug 2016 13:49:19 +0100	[thread overview]
Message-ID: <1471438159-29992-1-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1471342766-18445-1-git-send-email-sudeep.holla@arm.com>

As per the GICv3 specification, to power down a processor using GICv3
and allow automatic power-on if an interrupt must be sent to a processor,
software must set Enable to zero for all interrupt groups(by writing
to GICC_CTLR or ICC_IGRPEN{0,1}_EL1/3 as appropriate.

When commit 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier")
was introduced there were no firmware implementations(in particular PSCI)
handling this.

Linux kernel may not be aware of the CPU power state details and might
fail to identify the power states that require quiescing the CPU
interface. Even if it can be aware of those details, it can't determine
which CPU power state have been triggered at the platform level and how
the power control is implemented.

This patch make disabling redistributor and group1 non-secure interrupts
in the power down path and re-enabling of redistributor in the power-up
path conditional. It will be handled in the kernel if and only if the
non-secure accesses are permitted to access and modify control registers.
It is left to the platform implementation otherwise.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/irqchip/irq-gic-v3.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

v1->v2:
	- Moved gic_dist_security_disabled inside CONFIG_CPU_PM to fix
	  the build warning triggered otherwise.

Hi Marc,

Consider this as a fix for v4.8 as it fixes CPUIdle related boot hang on
Qualcomm QDF2432 platform.

Regards,
Sudeep

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6fc56c3466b0..ede5672ab34d 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -667,13 +667,20 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 #endif

 #ifdef CONFIG_CPU_PM
+/* Check whether it's single security state view */
+static bool gic_dist_security_disabled(void)
+{
+	return readl_relaxed(gic_data.dist_base + GICD_CTLR) & GICD_CTLR_DS;
+}
+
 static int gic_cpu_pm_notifier(struct notifier_block *self,
 			       unsigned long cmd, void *v)
 {
 	if (cmd == CPU_PM_EXIT) {
-		gic_enable_redist(true);
+		if (gic_dist_security_disabled())
+			gic_enable_redist(true);
 		gic_cpu_sys_reg_init();
-	} else if (cmd == CPU_PM_ENTER) {
+	} else if (cmd == CPU_PM_ENTER && gic_dist_security_disabled()) {
 		gic_write_grpen1(0);
 		gic_enable_redist(false);
 	}
--
2.7.4

  parent reply	other threads:[~2016-08-17 12:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-16 10:19 [PATCH] " Sudeep Holla
2016-08-16 19:21 ` Christopher Covington
2016-08-17 12:39   ` Sudeep Holla
2016-08-17 12:49 ` Sudeep Holla [this message]
2016-08-17 13:02   ` [PATCH v2] " Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1471438159-29992-1-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=cov@codeaurora.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marc.zyngier@arm.com \
    --cc=pprakash@codeaurora.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®