From: Yunhui Cui <B56489@freescale.com>
To: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<han.xu@freescale.com>, <jagannadh.teki@gmail.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <yao.yuan@nxp.com>,
Yunhui Cui <yunhui.cui@nxp.com>
Subject: [PATCH v3 5/9] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a
Date: Thu, 18 Aug 2016 15:38:00 +0800 [thread overview]
Message-ID: <1471505884-33996-5-git-send-email-B56489@freescale.com> (raw)
In-Reply-To: <1471505884-33996-1-git-send-email-B56489@freescale.com>
There is a hardware feature that qspi_amba_base is added
internally by SOC design on ls2080a. So as to software, the driver
need support to the feature.
Signed-off-by: Yunhui Cui <B56489@freescale.com>
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 2521370..57eed3c 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -41,6 +41,8 @@
#define QUADSPI_QUIRK_TKT253890 (1 << 2)
/* Controller cannot wake up from wait mode, TKT245618 */
#define QUADSPI_QUIRK_TKT245618 (1 << 3)
+/* QSPI_AMBA_BASE is internally added by SOC design */
+#define QUADSPI_AMBA_BASE_INTERNAL (0x10000)
/* The registers */
#define QUADSPI_MCR 0x00
@@ -217,6 +219,7 @@ enum fsl_qspi_devtype {
FSL_QUADSPI_IMX7D,
FSL_QUADSPI_IMX6UL,
FSL_QUADSPI_LS1021A,
+ FSL_QUADSPI_LS2080A,
};
struct fsl_qspi_devtype_data {
@@ -270,6 +273,14 @@ static struct fsl_qspi_devtype_data ls1021a_data = {
.driver_data = 0,
};
+static struct fsl_qspi_devtype_data ls2080a_data = {
+ .devtype = FSL_QUADSPI_LS2080A,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = QUADSPI_AMBA_BASE_INTERNAL,
+};
+
#define FSL_QSPI_MAX_CHIP 4
struct fsl_qspi {
struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -312,6 +323,11 @@ static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618;
}
+static inline int has_added_amba_base_internal(struct fsl_qspi *q)
+{
+ return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL;
+}
+
/*
* R/W functions for big- or little-endian registers:
* The qSPI controller's endian is independent of the CPU core's endian.
@@ -558,8 +574,11 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
/* save the reg */
reg = qspi_readl(q, base + QUADSPI_MCR);
- qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
- base + QUADSPI_SFAR);
+ if (has_added_amba_base_internal(q))
+ qspi_writel(q, q->chip_base_addr + addr, base + QUADSPI_SFAR);
+ else
+ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
+ base + QUADSPI_SFAR);
qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
base + QUADSPI_RBCT);
qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
@@ -849,6 +868,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
+ { .compatible = "fsl,ls2080a-qspi", .data = (void *)&ls2080a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
--
2.1.0.27.g96db324
next prev parent reply other threads:[~2016-08-18 8:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 7:37 [PATCH v3 1/9] mtd:fsl-quadspi:use the property fields of SPI-NOR Yunhui Cui
2016-08-18 7:37 ` [PATCH v3 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ Yunhui Cui
2016-09-14 19:44 ` Han Xu
2017-01-27 10:35 ` Cyrille Pitchen
2016-08-18 7:37 ` [PATCH v3 3/9] mtd: spi-nor: fsl-quadspi: add fast-read mode support Yunhui Cui
2016-09-14 19:45 ` Han Xu
2016-08-18 7:37 ` [PATCH v3 4/9] mtd: spi-nor: fsl-quadspi: extend support for some special requerment Yunhui Cui
2016-09-14 19:45 ` Han Xu
2016-08-18 7:38 ` Yunhui Cui [this message]
2016-09-14 19:46 ` [PATCH v3 5/9] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a Han Xu
2016-08-18 7:38 ` [PATCH v3 6/9] mtd: spi-nor: Support R/W for S25FS-S family flash Yunhui Cui
2016-09-14 19:48 ` Han Xu
2016-09-15 6:50 ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-11-16 17:10 ` Han Xu
2016-11-17 7:42 ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-11-17 9:14 ` Yao Yuan
2016-11-17 9:20 ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-11-18 4:19 ` Yao Yuan
2016-11-18 10:59 ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-11-21 6:27 ` Yao Yuan
2016-11-21 7:14 ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-11-21 9:18 ` Yao Yuan
2016-11-18 4:30 ` Han Xu
2016-11-21 6:30 ` Yao Yuan
2016-11-16 17:44 ` Jagan Teki
2016-08-18 7:38 ` [PATCH v3 7/9] mtd: fsl-quadspi: Solve Micron Spansion flash command conflict Yunhui Cui
2016-09-14 19:48 ` Han Xu
2016-08-18 7:38 ` [PATCH v3 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch Yunhui Cui
2016-09-14 19:49 ` Han Xu
2016-08-18 7:38 ` [PATCH v3 9/9] mtd: fsl-quadspi: add multi flash chip R/W on ls2080a Yunhui Cui
2016-09-14 19:49 ` Han Xu
2016-09-14 19:44 ` [PATCH v3 1/9] mtd:fsl-quadspi:use the property fields of SPI-NOR Han Xu
2016-09-30 10:04 ` Cyrille Pitchen
2017-01-27 10:27 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471505884-33996-5-git-send-email-B56489@freescale.com \
--to=b56489@freescale.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=han.xu@freescale.com \
--cc=jagannadh.teki@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=yao.yuan@nxp.com \
--cc=yunhui.cui@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®