Re: [PATCH v3 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ

[Han Xu <xhnjupt@gmail.com>]

On Thu, Aug 18, 2016 at 2:37 AM, Yunhui Cui <B56489@freescale.com> wrote:
> There are some read modes for flash, such as NORMAL, FAST,
> QUAD, DDR QUAD. These modes will use the identical lut table base
> So rename SEQID_QUAD_READ to SEQID_READ.
>
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
> ---
>  drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 5ad6402..21c77e8 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -193,7 +193,7 @@
>  #define QUADSPI_LUT_NUM                64
>
>  /* SEQID -- we can have 16 seqids at most. */
> -#define SEQID_QUAD_READ                0
> +#define SEQID_READ             0
>  #define SEQID_WREN             1
>  #define SEQID_WRDI             2
>  #define SEQID_RDSR             3
> @@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>         for (i = 0; i < QUADSPI_LUT_NUM; i++)
>                 qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
>
> -       /* Quad Read */
> -       lut_base = SEQID_QUAD_READ * 4;
> +       /* Read */
> +       lut_base = SEQID_READ * 4;
>
>         qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
>                         base + QUADSPI_LUT(lut_base));
> @@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>  {
>         switch (cmd) {
>         case SPINOR_OP_READ_1_1_4:
> -               return SEQID_QUAD_READ;
> +               return SEQID_READ;
>         case SPINOR_OP_WREN:
>                 return SEQID_WREN;
>         case SPINOR_OP_WRDI:
> --
> 2.1.0.27.g96db324
>
>
Acked-by: Han xu <han.xu@nxp.com>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



-- 
Sincerely,

Han XU