From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: "Andy Green" <andy.green@linaro.org>,
"David Airlie" <airlied@linux.ie>,
"Archit Taneja" <architt@codeaurora.org>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
"Boris Brezillon" <boris.brezillon@free-electrons.com>,
"Andy Green" <andy@warmcat.com>,
"Dave Long" <dave.long@linaro.org>,
"Guodong Xu" <guodong.xu@linaro.org>,
"Zhangfei Gao" <zhangfei.gao@linaro.org>,
"Mark Brown" <broonie@kernel.org>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Jose Abreu" <joabreu@synopsys.com>,
dri-devel@lists.freedesktop.org,
"John Stultz" <john.stultz@linaro.org>
Subject: [RFC][PATCH 4/4] drm/bridge: adv7511: Initialize audio packet on adv7533
Date: Mon, 22 Aug 2016 22:50:47 -0700 [thread overview]
Message-ID: <1471931447-12049-5-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1471931447-12049-1-git-send-email-john.stultz@linaro.org>
From: Andy Green <andy.green@linaro.org>
Set the initial audio packet settings to allow the audio
driver to work.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline, changed to use register
names rather then hex values, and removed config values set by
audio driver.]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/gpu/drm/bridge/adv7511/adv7533.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
index 6798ecf..cced7c9 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
@@ -104,6 +104,28 @@ void adv7533_dsi_power_on(struct adv7511 *adv)
/* disable test mode */
regmap_write(adv->regmap_cec, 0x55, 0x00);
+ /* hide Audio infoframe updates */
+ regmap_update_bits(adv->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+ BIT(5), BIT(5));
+ /* enable N/CTS, enable Audio sample packets */
+ regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
+ BIT(5), BIT(5));
+ /* enable N/CTS */
+ regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
+ BIT(6), BIT(6));
+ /* not copyrighted */
+ regmap_update_bits(adv->regmap, ADV7511_REG_AUDIO_CFG1,
+ BIT(5), BIT(5));
+ /* enable audio infoframes */
+ regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
+ BIT(3), BIT(3));
+ /* AV mute disable */
+ regmap_update_bits(adv->regmap, ADV7511_REG_GC(0),
+ BIT(7) | BIT(6), BIT(7));
+ /* use Audio infoframe updated info */
+ regmap_update_bits(adv->regmap, ADV7511_REG_GC(1),
+ BIT(5), 0);
+
regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
ARRAY_SIZE(adv7533_cec_fixed_registers));
}
--
1.9.1
next prev parent reply other threads:[~2016-08-23 5:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-23 5:50 [RFC][PATCH 0/4] Audio support for adv7511 hdmi bridge John Stultz
2016-08-23 5:50 ` [RFC][PATCH 1/4] drm/bridge: adv7511: Move the common data structures to header file John Stultz
2016-08-23 5:50 ` [RFC][PATCH 2/4] drm/bridge: adv7511: Add Audio support John Stultz
2016-08-26 13:02 ` Srinivas Kandagatla
2016-08-23 5:50 ` [RFC][PATCH 3/4] drm/bridge: adv7511: Enable the audio data and clock pads on adv7533 John Stultz
2016-08-23 5:50 ` John Stultz [this message]
2016-08-26 13:02 ` [RFC][PATCH 0/4] Audio support for adv7511 hdmi bridge Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471931447-12049-5-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=airlied@linux.ie \
--cc=andy.green@linaro.org \
--cc=andy@warmcat.com \
--cc=architt@codeaurora.org \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=dave.long@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=guodong.xu@linaro.org \
--cc=joabreu@synopsys.com \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=ville.syrjala@linux.intel.com \
--cc=wsa+renesas@sang-engineering.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®