From: Wanpeng Li <kernellwp@gmail.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: "Wanpeng Li" <wanpeng.li@hotmail.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
"Wincy Van" <fanwenyi0529@gmail.com>,
"Yang Zhang" <yang.zhang.wz@gmail.com>
Subject: [PATCH] KVM: VMX: Enable MSR-BASED TPR shadow even if w/o APICv
Date: Wed, 14 Sep 2016 15:58:56 +0800 [thread overview]
Message-ID: <1473839936-3393-1-git-send-email-wanpeng.li@hotmail.com> (raw)
From: Wanpeng Li <wanpeng.li@hotmail.com>
I observed that kvmvapic(to optimize flexpriority=N or AMD) is used
to boost TPR access when testing kvm-unit-test/eventinj.flat tpr case
on my haswell desktop (w/ flexpriority, w/o APICv). Commit (8d14695f9542
x86, apicv: add virtual x2apic support) disable virtual x2apic mode
completely if w/o APICv, and the author also told me that windows guest
can't enter into x2apic mode when he developed the APICv feature several
years ago. However, it is not truth currently, Interrupt Remapping and
vIOMMU is added to qemu and the developers from Intel test windows 8 can
work in x2apic mode w/ Interrupt Remapping enabled recently.
This patch enables TPR shadow for virtual x2apic mode to boost
windows guest in x2apic mode even if w/o APICv.
Can pass the kvm-unit-test.
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wincy Van <fanwenyi0529@gmail.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
---
arch/x86/kvm/vmx.c | 41 ++++++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 5cede40..e703129 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6336,7 +6336,7 @@ static void wakeup_handler(void)
static __init int hardware_setup(void)
{
- int r = -ENOMEM, i, msr;
+ int r = -ENOMEM, i;
rdmsrl_safe(MSR_EFER, &host_efer);
@@ -6464,18 +6464,6 @@ static __init int hardware_setup(void)
set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
- for (msr = 0x800; msr <= 0x8ff; msr++)
- vmx_disable_intercept_msr_read_x2apic(msr);
-
- /* TMCCT */
- vmx_enable_intercept_msr_read_x2apic(0x839);
- /* TPR */
- vmx_disable_intercept_msr_write_x2apic(0x808);
- /* EOI */
- vmx_disable_intercept_msr_write_x2apic(0x80b);
- /* SELF-IPI */
- vmx_disable_intercept_msr_write_x2apic(0x83f);
-
if (enable_ept) {
kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK,
(enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
@@ -8435,12 +8423,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
return;
}
- /*
- * There is not point to enable virtualize x2apic without enable
- * apicv
- */
- if (!cpu_has_vmx_virtualize_x2apic_mode() ||
- !kvm_vcpu_apicv_active(vcpu))
+ if (!cpu_has_vmx_virtualize_x2apic_mode())
return;
if (!cpu_need_tpr_shadow(vcpu))
@@ -8449,8 +8432,28 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
sec_exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
if (set) {
+ int msr;
+
sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
+
+ if (kvm_vcpu_apicv_active(vcpu)) {
+ for (msr = 0x800; msr <= 0x8ff; msr++)
+ vmx_disable_intercept_msr_read_x2apic(msr);
+
+ /* TMCCT */
+ vmx_enable_intercept_msr_read_x2apic(0x839);
+ /* TPR */
+ vmx_disable_intercept_msr_write_x2apic(0x808);
+ /* EOI */
+ vmx_disable_intercept_msr_write_x2apic(0x80b);
+ /* SELF-IPI */
+ vmx_disable_intercept_msr_write_x2apic(0x83f);
+ } else if (vmx_exec_control(to_vmx(vcpu)) & CPU_BASED_TPR_SHADOW) {
+ /* TPR */
+ vmx_disable_intercept_msr_read_x2apic(0x808);
+ vmx_disable_intercept_msr_write_x2apic(0x808);
+ }
} else {
sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
--
1.9.1
next reply other threads:[~2016-09-14 7:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-14 7:58 Wanpeng Li [this message]
2016-09-14 9:40 ` Paolo Bonzini
2016-09-14 12:03 ` Radim Krčmář
2016-09-15 1:19 ` Wanpeng Li
2016-09-15 6:29 ` Paolo Bonzini
2016-09-15 6:40 ` Wanpeng Li
2016-09-15 7:05 ` Wanpeng Li
2016-09-15 15:58 ` Radim Krčmář
2016-09-18 6:53 ` Wanpeng Li
2016-09-18 6:55 ` Wanpeng Li
2016-09-19 13:44 ` Radim Krčmář
2016-09-20 0:18 ` Wanpeng Li
2016-09-22 6:48 ` Wanpeng Li
2016-09-15 0:07 ` Wanpeng Li
2016-09-15 0:17 ` Wanpeng Li
2016-09-15 4:08 ` Mika Penttilä
2016-09-15 4:25 ` Wanpeng Li
2016-09-15 4:46 ` Mika Penttilä
2016-09-15 6:30 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473839936-3393-1-git-send-email-wanpeng.li@hotmail.com \
--to=kernellwp@gmail.com \
--cc=fanwenyi0529@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=wanpeng.li@hotmail.com \
--cc=yang.zhang.wz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®