mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Mika Penttilä" <mika.penttila@nextfour.com>
To: Wanpeng Li <kernellwp@gmail.com>, <linux-kernel@vger.kernel.org>,
	<kvm@vger.kernel.org>
Cc: "Wanpeng Li" <wanpeng.li@hotmail.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	"Wincy Van" <fanwenyi0529@gmail.com>,
	"Yang Zhang" <yang.zhang.wz@gmail.com>
Subject: Re: [PATCH] KVM: VMX: Enable MSR-BASED TPR shadow even if w/o APICv
Date: Thu, 15 Sep 2016 07:08:04 +0300	[thread overview]
Message-ID: <f147e183-126f-dff4-f64b-b023b00a41ee@nextfour.com> (raw)
In-Reply-To: <1473839936-3393-1-git-send-email-wanpeng.li@hotmail.com>

On 09/14/2016 10:58 AM, Wanpeng Li wrote:
> From: Wanpeng Li <wanpeng.li@hotmail.com>
> 
> I observed that kvmvapic(to optimize flexpriority=N or AMD) is used 
> to boost TPR access when testing kvm-unit-test/eventinj.flat tpr case
> on my haswell desktop (w/ flexpriority, w/o APICv). Commit (8d14695f9542 
> x86, apicv: add virtual x2apic support) disable virtual x2apic mode 
> completely if w/o APICv, and the author also told me that windows guest
> can't enter into x2apic mode when he developed the APICv feature several 
> years ago. However, it is not truth currently, Interrupt Remapping and 
> vIOMMU is added to qemu and the developers from Intel test windows 8 can 
> work in x2apic mode w/ Interrupt Remapping enabled recently. 
> 
> This patch enables TPR shadow for virtual x2apic mode to boost 
> windows guest in x2apic mode even if w/o APICv.
> 
> Can pass the kvm-unit-test.
> 

While at it, is the vmx flexpriotity stuff still valid code?
AFAICS it gets enabled iff TPR shadow is on. flexpriority
is on when :

(flexpriority_enabled && lapic_in_kernel && cpu_has_vmx_tpr_shadow && cpu_has_vmx_virtualize_apic_accesses)

But apic accesses to TPR mmio are not then trapped and TPR changes not reported because
the “use TPR shadow” VM-execution control is 1.

Thanks,
Mika


> Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Radim Krčmář <rkrcmar@redhat.com>
> Cc: Wincy Van <fanwenyi0529@gmail.com>
> Cc: Yang Zhang <yang.zhang.wz@gmail.com>
> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
> ---
>  arch/x86/kvm/vmx.c | 41 ++++++++++++++++++++++-------------------
>  1 file changed, 22 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 5cede40..e703129 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -6336,7 +6336,7 @@ static void wakeup_handler(void)
>  
>  static __init int hardware_setup(void)
>  {
> -	int r = -ENOMEM, i, msr;
> +	int r = -ENOMEM, i;
>  
>  	rdmsrl_safe(MSR_EFER, &host_efer);
>  
> @@ -6464,18 +6464,6 @@ static __init int hardware_setup(void)
>  
>  	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
>  
> -	for (msr = 0x800; msr <= 0x8ff; msr++)
> -		vmx_disable_intercept_msr_read_x2apic(msr);
> -
> -	/* TMCCT */
> -	vmx_enable_intercept_msr_read_x2apic(0x839);
> -	/* TPR */
> -	vmx_disable_intercept_msr_write_x2apic(0x808);
> -	/* EOI */
> -	vmx_disable_intercept_msr_write_x2apic(0x80b);
> -	/* SELF-IPI */
> -	vmx_disable_intercept_msr_write_x2apic(0x83f);
> -
>  	if (enable_ept) {
>  		kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK,
>  			(enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
> @@ -8435,12 +8423,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
>  		return;
>  	}
>  
> -	/*
> -	 * There is not point to enable virtualize x2apic without enable
> -	 * apicv
> -	 */
> -	if (!cpu_has_vmx_virtualize_x2apic_mode() ||
> -				!kvm_vcpu_apicv_active(vcpu))
> +	if (!cpu_has_vmx_virtualize_x2apic_mode())
>  		return;
>  
>  	if (!cpu_need_tpr_shadow(vcpu))
> @@ -8449,8 +8432,28 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
>  	sec_exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
>  
>  	if (set) {
> +		int msr;
> +
>  		sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
>  		sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
> +
> +		if (kvm_vcpu_apicv_active(vcpu)) {
> +			for (msr = 0x800; msr <= 0x8ff; msr++)
> +				vmx_disable_intercept_msr_read_x2apic(msr);
> +
> +			/* TMCCT */
> +			vmx_enable_intercept_msr_read_x2apic(0x839);
> +			/* TPR */
> +			vmx_disable_intercept_msr_write_x2apic(0x808);
> +			/* EOI */
> +			vmx_disable_intercept_msr_write_x2apic(0x80b);
> +			/* SELF-IPI */
> +			vmx_disable_intercept_msr_write_x2apic(0x83f);
> +		} else if (vmx_exec_control(to_vmx(vcpu)) & CPU_BASED_TPR_SHADOW) {
> +			/* TPR */
> +			vmx_disable_intercept_msr_read_x2apic(0x808);
> +			vmx_disable_intercept_msr_write_x2apic(0x808);
> +		}
>  	} else {
>  		sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
>  		sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
> 

  parent reply	other threads:[~2016-09-15  4:22 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-14  7:58 Wanpeng Li
2016-09-14  9:40 ` Paolo Bonzini
2016-09-14 12:03   ` Radim Krčmář
2016-09-15  1:19     ` Wanpeng Li
2016-09-15  6:29       ` Paolo Bonzini
2016-09-15  6:40         ` Wanpeng Li
2016-09-15  7:05     ` Wanpeng Li
2016-09-15 15:58       ` Radim Krčmář
2016-09-18  6:53         ` Wanpeng Li
2016-09-18  6:55           ` Wanpeng Li
2016-09-19 13:44           ` Radim Krčmář
2016-09-20  0:18             ` Wanpeng Li
2016-09-22  6:48             ` Wanpeng Li
2016-09-15  0:07   ` Wanpeng Li
2016-09-15  0:17     ` Wanpeng Li
2016-09-15  4:08 ` Mika Penttilä [this message]
2016-09-15  4:25   ` Wanpeng Li
2016-09-15  4:46     ` Mika Penttilä
2016-09-15  6:30   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f147e183-126f-dff4-f64b-b023b00a41ee@nextfour.com \
    --to=mika.penttila@nextfour.com \
    --cc=fanwenyi0529@gmail.com \
    --cc=kernellwp@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=wanpeng.li@hotmail.com \
    --cc=yang.zhang.wz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome