From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Helen Koike <helen.koike@collabora.co.uk>,
Lars-Peter Clausen <lars@metafoo.de>,
Sebastian Reichel <sre@kernel.org>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Chris Healy <cphealy@gmail.com>,
Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Subject: [PATCH] ASoC: tpa6130a2: fix volume setting when no stream is running
Date: Thu, 22 Sep 2016 13:10:40 +0300 [thread overview]
Message-ID: <1474539040-25347-1-git-send-email-nikita.yoush@cogentembedded.com> (raw)
After moving tpa6130a2 power management to DAPM, if chip can be physically
powered off (either reset_gpio is defined, or regulator indeed removes
power), then volume change no longer works unless chip is on due to
a running stream.
Fix that by entering regcache cache_only mode while chip is off.
Move regcache calls to tpa6130a2_power() to get them at driver init time
as well.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
---
sound/soc/codecs/tpa6130a2.c | 49 +++++++++++++++++++++++---------------------
1 file changed, 26 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index f1ea052..3b6faed 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -52,7 +52,7 @@ struct tpa6130a2_data {
static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable)
{
- int ret;
+ int ret = 0, ret2;
if (enable) {
ret = regulator_enable(data->supply);
@@ -64,20 +64,34 @@ static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable)
/* Power on */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 1);
+
+ /* Sync registers */
+ regcache_cache_only(data->regmap, false);
+ ret = regcache_sync(data->regmap);
+ if (ret != 0) {
+ dev_err(data->dev,
+ "Failed to sync registers: %d\n", ret);
+ goto regcache_sync_failed;
+ }
} else {
+ /* Powered off device does not retain registers. While device
+ * is off, any register updates (i.e. volume changes) should
+ * happen in cache only.
+ */
+ regcache_mark_dirty(data->regmap);
+regcache_sync_failed:
+ regcache_cache_only(data->regmap, true);
+
/* Power off */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 0);
- ret = regulator_disable(data->supply);
- if (ret != 0) {
+ ret2 = regulator_disable(data->supply);
+ if (ret2 != 0) {
dev_err(data->dev,
- "Failed to disable supply: %d\n", ret);
- return ret;
+ "Failed to disable supply: %d\n", ret2);
+ return ret ? ret : ret2;
}
-
- /* device regs does not match the cache state anymore */
- regcache_mark_dirty(data->regmap);
}
return ret;
@@ -88,25 +102,14 @@ static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w,
{
struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c);
- int ret;
- /* before widget power up */
if (SND_SOC_DAPM_EVENT_ON(event)) {
- /* Turn on the chip */
- tpa6130a2_power(data, true);
- /* Sync the registers */
- ret = regcache_sync(data->regmap);
- if (ret < 0) {
- dev_err(c->dev, "Failed to initialize chip\n");
- tpa6130a2_power(data, false);
- return ret;
- }
- /* after widget power down */
+ /* Before widget power up: turn chip on, sync registers */
+ return tpa6130a2_power(data, true);
} else {
- tpa6130a2_power(data, false);
+ /* After widget power down: turn chip off */
+ return tpa6130a2_power(data, false);
}
-
- return 0;
}
/*
--
2.1.4
next reply other threads:[~2016-09-22 10:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-22 10:10 Nikita Yushchenko [this message]
2016-09-24 18:31 ` Mark Brown
2016-09-26 10:35 ` [PATCH] ASoC: tpa6130a2: unmerge power enable error path from power disable path Nikita Yushchenko
2016-09-26 16:08 ` Mark Brown
2016-09-26 16:14 ` Nikita Yushchenko
2016-09-26 16:15 ` Applied "ASoC: tpa6130a2: unmerge power enable error path from power disable path" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474539040-25347-1-git-send-email-nikita.yoush@cogentembedded.com \
--to=nikita.yoush@cogentembedded.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cphealy@gmail.com \
--cc=helen.koike@collabora.co.uk \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sre@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®