From: John Garry <john.garry@huawei.com>
To: <martin.petersen@oracle.com>, <jejb@linux.vnet.ibm.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
<linux-kernel@vger.kernel.org>, <john.garry2@mail.dcu.ie>,
Xiang Chen <chenxiang66@hisilicon.com>,
John Garry <john.garry@huawei.com>
Subject: [PATCH 11/11] hisi_sas: add PHY set linkrate support for v1 and v2 hw
Date: Mon, 7 Nov 2016 20:48:40 +0800 [thread overview]
Message-ID: <1478522920-108145-12-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1478522920-108145-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
Add the function to set PHY min and max linkrate through
sysfs interface.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +++
drivers/scsi/hisi_sas/hisi_sas_main.c | 12 +++++++--
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 45 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 45 ++++++++++++++++++++++++++++++++++
4 files changed, 103 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 8b5ecc6..c0cd505 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -168,6 +168,9 @@ struct hisi_sas_hw {
void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_set_linkrate)(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *linkrates);
+ enum sas_linkrate (*phy_get_max_linkrate)(void);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 18e2194..6d6f150 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -369,9 +369,14 @@ static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
struct sas_phy *sphy = sas_phy->phy;
sphy->negotiated_linkrate = sas_phy->linkrate;
- sphy->minimum_linkrate = phy->minimum_linkrate;
sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw =
+ hisi_hba->hw->phy_get_max_linkrate();
+ if (sphy->minimum_linkrate == SAS_LINK_RATE_UNKNOWN)
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+
+ if (sphy->maximum_linkrate == SAS_LINK_RATE_UNKNOWN)
+ sphy->maximum_linkrate = phy->maximum_linkrate;
}
if (phy->phy_type & PORT_TYPE_SAS) {
@@ -645,6 +650,9 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
break;
case PHY_FUNC_SET_LINK_RATE:
+ hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, funcdata);
+ break;
+
case PHY_FUNC_RELEASE_SPINUP_HOLD:
default:
return -EOPNOTSUPP;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 05177fc..8a1be0b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -843,6 +843,49 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static enum sas_linkrate phy_get_max_linkrate_v1_hw(void)
+{
+ return SAS_LINK_RATE_6_0_GBPS;
+}
+
+static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v1_hw(hisi_hba, phy_no);
+}
+
static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
{
int i, bitmap = 0;
@@ -1818,6 +1861,8 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
.phy_enable = enable_phy_v1_hw,
.phy_disable = disable_phy_v1_hw,
.phy_hard_reset = phy_hard_reset_v1_hw,
+ .phy_set_linkrate = phy_set_linkrate_v1_hw,
+ .phy_get_max_linkrate = phy_get_max_linkrate_v1_hw,
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V1_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e88113a..15487f2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1060,6 +1060,49 @@ static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
+{
+ return SAS_LINK_RATE_12_0_GBPS;
+}
+
+static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v2_hw(hisi_hba, phy_no);
+}
+
static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
{
int i, bitmap = 0;
@@ -2739,6 +2782,8 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
.phy_enable = enable_phy_v2_hw,
.phy_disable = disable_phy_v2_hw,
.phy_hard_reset = phy_hard_reset_v2_hw,
+ .phy_set_linkrate = phy_set_linkrate_v2_hw,
+ .phy_get_max_linkrate = phy_get_max_linkrate_v2_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
};
--
1.9.1
next prev parent reply other threads:[~2016-11-07 12:23 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 12:48 [PATCH 00/11] hisi_sas: some fixes, improvements, and new features John Garry
2016-11-07 12:48 ` [PATCH 01/11] hisi_sas: add v2 hw support for ECC and AXI bus fatal error John Garry
2016-11-16 1:47 ` Zhangfei Gao
2016-11-23 8:59 ` John Garry
2016-11-23 9:13 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 02/11] hisi_sas: alloc queue id of slot according to device id John Garry
2016-11-16 1:41 ` Zhangfei Gao
2016-11-16 10:02 ` John Garry
2016-11-07 12:48 ` [PATCH 03/11] hisi_sas: only process broadcast change in phy_bcast_v2_hw() John Garry
2016-11-16 1:47 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 04/11] hisi_sas: fix port form bug in hisi_sas_port_notify_formed() John Garry
2016-11-16 1:43 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 05/11] hisi_sas: replace WARN_ON() with dev_warn() for internal abort John Garry
2016-11-23 8:57 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 06/11] hisi_sas: modify return value of hisi_sas_query_task() John Garry
2016-11-16 1:50 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 07/11] hisi_sas: delete repeated configuration in free_device_v2_hw() John Garry
2016-11-16 1:43 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 08/11] hisi_sas: modify some values in get_ata_protocol() John Garry
2016-11-16 1:44 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 09/11] hisi_sas: check SATA FIS when directly attaching SATA device John Garry
2016-11-16 1:49 ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 10/11] hisi_sas: use atomic64_t for hisi_sas_device.running_req John Garry
2016-11-16 1:44 ` Zhangfei Gao
2016-11-07 12:48 ` John Garry [this message]
2016-11-16 1:48 ` [PATCH 11/11] hisi_sas: add PHY set linkrate support for v1 and v2 hw Zhangfei Gao
2016-11-14 23:49 ` [PATCH 00/11] hisi_sas: some fixes, improvements, and new features Martin K. Petersen
2016-11-22 16:41 ` John Garry
2016-11-22 22:01 ` Martin K. Petersen
2016-11-25 11:40 ` John Garry
2016-11-25 14:55 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478522920-108145-12-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=john.garry2@mail.dcu.ie \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®