mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <martin.petersen@oracle.com>, <jejb@linux.vnet.ibm.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
	<linux-kernel@vger.kernel.org>, <john.garry2@mail.dcu.ie>,
	Xiang Chen <chenxiang66@hisilicon.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH 01/11] hisi_sas: add v2 hw support for ECC and AXI bus fatal error
Date: Mon, 7 Nov 2016 20:48:30 +0800	[thread overview]
Message-ID: <1478522920-108145-2-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1478522920-108145-1-git-send-email-john.garry@huawei.com>

From: Xiang Chen <chenxiang66@hisilicon.com>

For ECC 1bit error, logic can recover it, so we only print
a warning.
For ECC multi-bit and AXI bus fatal error, we panic.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 425 ++++++++++++++++++++++++++++++++-
 1 file changed, 420 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 0763b47..9e70e6d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -55,10 +55,44 @@
 #define HGC_DFX_CFG2			0xc0
 #define HGC_IOMB_PROC1_STATUS	0x104
 #define CFG_1US_TIMER_TRSH		0xcc
+#define HGC_LM_DFX_STATUS2		0x128
+#define HGC_LM_DFX_STATUS2_IOSTLIST_OFF		0
+#define HGC_LM_DFX_STATUS2_IOSTLIST_MSK	(0xfff << \
+					 HGC_LM_DFX_STATUS2_IOSTLIST_OFF)
+#define HGC_LM_DFX_STATUS2_ITCTLIST_OFF		12
+#define HGC_LM_DFX_STATUS2_ITCTLIST_MSK	(0x7ff << \
+					 HGC_LM_DFX_STATUS2_ITCTLIST_OFF)
+#define HGC_CQE_ECC_ADDR		0x13c
+#define HGC_CQE_ECC_1B_ADDR_OFF	0
+#define HGC_CQE_ECC_1B_ADDR_MSK	(0x3f < HGC_CQE_ECC_1B_ADDR_OFF)
+#define HGC_CQE_ECC_MB_ADDR_OFF	8
+#define HGC_CQE_ECC_MB_ADDR_MSK (0x3f < HGC_CQE_ECC_MB_ADDR_OFF)
+#define HGC_IOST_ECC_ADDR		0x140
+#define HGC_IOST_ECC_1B_ADDR_OFF	0
+#define HGC_IOST_ECC_1B_ADDR_MSK	(0x3ff < HGC_IOST_ECC_1B_ADDR_OFF)
+#define HGC_IOST_ECC_MB_ADDR_OFF	16
+#define HGC_IOST_ECC_MB_ADDR_MSK	(0x3ff < HGC_IOST_ECC_MB_ADDR_OFF)
+#define HGC_DQE_ECC_ADDR		0x144
+#define HGC_DQE_ECC_1B_ADDR_OFF	0
+#define HGC_DQE_ECC_1B_ADDR_MSK	(0xfff < HGC_DQE_ECC_1B_ADDR_OFF)
+#define HGC_DQE_ECC_MB_ADDR_OFF	16
+#define HGC_DQE_ECC_MB_ADDR_MSK (0xfff < HGC_DQE_ECC_MB_ADDR_OFF)
 #define HGC_INVLD_DQE_INFO		0x148
 #define HGC_INVLD_DQE_INFO_FB_CH0_OFF	9
 #define HGC_INVLD_DQE_INFO_FB_CH0_MSK	(0x1 << HGC_INVLD_DQE_INFO_FB_CH0_OFF)
 #define HGC_INVLD_DQE_INFO_FB_CH3_OFF	18
+#define HGC_ITCT_ECC_ADDR		0x150
+#define HGC_ITCT_ECC_1B_ADDR_OFF		0
+#define HGC_ITCT_ECC_1B_ADDR_MSK		(0x3ff << \
+						 HGC_ITCT_ECC_1B_ADDR_OFF)
+#define HGC_ITCT_ECC_MB_ADDR_OFF		16
+#define HGC_ITCT_ECC_MB_ADDR_MSK		(0x3ff << \
+						 HGC_ITCT_ECC_MB_ADDR_OFF)
+#define HGC_AXI_FIFO_ERR_INFO	0x154
+#define AXI_ERR_INFO_OFF		0
+#define AXI_ERR_INFO_MSK		(0xff << AXI_ERR_INFO_OFF)
+#define FIFO_ERR_INFO_OFF		8
+#define FIFO_ERR_INFO_MSK		(0xff << FIFO_ERR_INFO_OFF)
 #define INT_COAL_EN			0x19c
 #define OQ_INT_COAL_TIME		0x1a0
 #define OQ_INT_COAL_CNT			0x1a4
@@ -73,13 +107,41 @@
 #define ENT_INT_SRC1_D2H_FIS_CH1_MSK	(0x1 << ENT_INT_SRC1_D2H_FIS_CH1_OFF)
 #define ENT_INT_SRC2			0x1bc
 #define ENT_INT_SRC3			0x1c0
+#define ENT_INT_SRC3_WP_DEPTH_OFF		8
+#define ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF	9
+#define ENT_INT_SRC3_RP_DEPTH_OFF		10
+#define ENT_INT_SRC3_AXI_OFF			11
+#define ENT_INT_SRC3_FIFO_OFF			12
+#define ENT_INT_SRC3_LM_OFF				14
 #define ENT_INT_SRC3_ITC_INT_OFF	15
 #define ENT_INT_SRC3_ITC_INT_MSK	(0x1 << ENT_INT_SRC3_ITC_INT_OFF)
+#define ENT_INT_SRC3_ABT_OFF		16
 #define ENT_INT_SRC_MSK1		0x1c4
 #define ENT_INT_SRC_MSK2		0x1c8
 #define ENT_INT_SRC_MSK3		0x1cc
 #define ENT_INT_SRC_MSK3_ENT95_MSK_OFF	31
 #define ENT_INT_SRC_MSK3_ENT95_MSK_MSK	(0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF)
+#define SAS_ECC_INTR			0x1e8
+#define SAS_ECC_INTR_DQE_ECC_1B_OFF		0
+#define SAS_ECC_INTR_DQE_ECC_MB_OFF		1
+#define SAS_ECC_INTR_IOST_ECC_1B_OFF	2
+#define SAS_ECC_INTR_IOST_ECC_MB_OFF	3
+#define SAS_ECC_INTR_ITCT_ECC_MB_OFF	4
+#define SAS_ECC_INTR_ITCT_ECC_1B_OFF	5
+#define SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF	6
+#define SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF	7
+#define SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF	8
+#define SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF	9
+#define SAS_ECC_INTR_CQE_ECC_1B_OFF		10
+#define SAS_ECC_INTR_CQE_ECC_MB_OFF		11
+#define SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF	12
+#define SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF	13
+#define SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF	14
+#define SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF	15
+#define SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF	16
+#define SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF	17
+#define SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF	18
+#define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF	19
 #define SAS_ECC_INTR_MSK		0x1ec
 #define HGC_ERR_STAT_EN			0x238
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
@@ -94,7 +156,20 @@
 #define COMPL_Q_0_DEPTH			0x4e8
 #define COMPL_Q_0_WR_PTR		0x4ec
 #define COMPL_Q_0_RD_PTR		0x4f0
-
+#define HGC_RXM_DFX_STATUS14	0xae8
+#define HGC_RXM_DFX_STATUS14_MEM0_OFF		0
+#define HGC_RXM_DFX_STATUS14_MEM0_MSK		(0x1ff << \
+						 HGC_RXM_DFX_STATUS14_MEM0_OFF)
+#define HGC_RXM_DFX_STATUS14_MEM1_OFF		9
+#define HGC_RXM_DFX_STATUS14_MEM1_MSK		(0x1ff << \
+						 HGC_RXM_DFX_STATUS14_MEM1_OFF)
+#define HGC_RXM_DFX_STATUS14_MEM2_OFF		18
+#define HGC_RXM_DFX_STATUS14_MEM2_MSK		(0x1ff << \
+						 HGC_RXM_DFX_STATUS14_MEM2_OFF)
+#define HGC_RXM_DFX_STATUS15	0xaec
+#define HGC_RXM_DFX_STATUS15_MEM3_OFF		0
+#define HGC_RXM_DFX_STATUS15_MEM3_MSK		(0x1ff << \
+						 HGC_RXM_DFX_STATUS15_MEM3_OFF)
 /* phy registers need init */
 #define PORT_BASE			(0x2000)
 
@@ -267,6 +342,8 @@
 #define ITCT_HDR_RTOLT_OFF		48
 #define ITCT_HDR_RTOLT_MSK		(0xffffULL << ITCT_HDR_RTOLT_OFF)
 
+#define HISI_SAS_FATAL_INT_NR	2
+
 struct hisi_sas_complete_v2_hdr {
 	__le32 dw0;
 	__le32 dw1;
@@ -808,7 +885,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffffffe);
-	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfffff3c0);
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfff00c30);
 	for (i = 0; i < hisi_hba->queue_count; i++)
 		hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
 
@@ -824,7 +901,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x10);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
-		hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
+		hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xfff87fff);
 		hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff);
@@ -2007,8 +2084,9 @@ static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
 			if (irq_value1) {
 				if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
 						  CHL_INT1_DMAC_TX_ECC_ERR_MSK))
-					panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
-						dev_name(dev), irq_value1);
+					panic("%s: DMAC RX/TX ecc bad error!\
+					       (0x%x)",
+					      dev_name(dev), irq_value1);
 
 				hisi_sas_phy_write32(hisi_hba, phy_no,
 						     CHL_INT1, irq_value1);
@@ -2039,6 +2117,318 @@ static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
 	return IRQ_HANDLED;
 }
 
+static void
+one_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, u32 irq_value)
+{
+	struct device *dev = &hisi_hba->pdev->dev;
+	u32 reg_val;
+
+	if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
+		dev_warn(dev, "hgc_dqe_acc1b_intr found: \
+			       Ram address is 0x%08X\n",
+			 (reg_val & HGC_DQE_ECC_1B_ADDR_MSK) >>
+			 HGC_DQE_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
+		dev_warn(dev, "hgc_iost_acc1b_intr found: \
+			       Ram address is 0x%08X\n",
+			 (reg_val & HGC_IOST_ECC_1B_ADDR_MSK) >>
+			 HGC_IOST_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
+		dev_warn(dev, "hgc_itct_acc1b_intr found: \
+			       Ram address is 0x%08X\n",
+			 (reg_val & HGC_ITCT_ECC_1B_ADDR_MSK) >>
+			 HGC_ITCT_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		dev_warn(dev, "hgc_iostl_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK) >>
+			 HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		dev_warn(dev, "hgc_itctl_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK) >>
+			 HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
+		dev_warn(dev, "hgc_cqe_acc1b_intr found: \
+			       Ram address is 0x%08X\n",
+			 (reg_val & HGC_CQE_ECC_1B_ADDR_MSK) >>
+			 HGC_CQE_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_warn(dev, "rxm_mem0_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK) >>
+			 HGC_RXM_DFX_STATUS14_MEM0_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_warn(dev, "rxm_mem1_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK) >>
+			 HGC_RXM_DFX_STATUS14_MEM1_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_warn(dev, "rxm_mem2_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK) >>
+			 HGC_RXM_DFX_STATUS14_MEM2_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
+		dev_warn(dev, "rxm_mem3_acc1b_intr found: \
+			       memory address is 0x%08X\n",
+			 (reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK) >>
+			 HGC_RXM_DFX_STATUS15_MEM3_OFF);
+	}
+
+}
+
+static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba,
+		u32 irq_value)
+{
+	u32 reg_val;
+	struct device *dev = &hisi_hba->pdev->dev;
+
+	if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
+		panic("%s: hgc_dqe_accbad_intr (0x%x) found: \
+		       Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_DQE_ECC_MB_ADDR_MSK) >>
+		      HGC_DQE_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
+		panic("%s: hgc_iost_accbad_intr (0x%x) found: \
+		       Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_IOST_ECC_MB_ADDR_MSK) >>
+		      HGC_IOST_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
+		panic("%s: hgc_itct_accbad_intr (0x%x) found: \
+		       Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_ITCT_ECC_MB_ADDR_MSK) >>
+		      HGC_ITCT_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		panic("%s: hgc_iostl_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK) >>
+		      HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		panic("%s: hgc_itctl_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK) >>
+		      HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
+		panic("%s: hgc_cqe_accbad_intr (0x%x) found: \
+		       Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_CQE_ECC_MB_ADDR_MSK) >>
+		      HGC_CQE_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem0_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK) >>
+		      HGC_RXM_DFX_STATUS14_MEM0_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem1_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK) >>
+		      HGC_RXM_DFX_STATUS14_MEM1_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem2_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK) >>
+		      HGC_RXM_DFX_STATUS14_MEM2_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
+		panic("%s: rxm_mem3_accbad_intr (0x%x) found: \
+		       memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK) >>
+		      HGC_RXM_DFX_STATUS15_MEM3_OFF);
+	}
+
+}
+
+static irqreturn_t fatal_ecc_int_v2_hw(int irq_no, void *p)
+{
+	struct hisi_hba *hisi_hba = p;
+	u32 irq_value, irq_msk;
+
+	irq_msk = hisi_sas_read32(hisi_hba, SAS_ECC_INTR_MSK);
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk | 0xffffffff);
+
+	irq_value = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+	if (irq_value) {
+		one_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
+		multi_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
+	}
+
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR, irq_value);
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk);
+
+	return IRQ_HANDLED;
+}
+
+#define AXI_ERR_NR	8
+static const char axi_err_info[AXI_ERR_NR][32] = {
+	"IOST_AXI_W_ERR",
+	"IOST_AXI_R_ERR",
+	"ITCT_AXI_W_ERR",
+	"ITCT_AXI_R_ERR",
+	"SATA_AXI_W_ERR",
+	"SATA_AXI_R_ERR",
+	"DQE_AXI_R_ERR",
+	"CQE_AXI_W_ERR"
+};
+
+#define FIFO_ERR_NR	5
+static const char fifo_err_info[FIFO_ERR_NR][32] = {
+	"CQE_WINFO_FIFO",
+	"CQE_MSG_FIFIO",
+	"GETDQE_FIFO",
+	"CMDP_FIFO",
+	"AWTCTRL_FIFO"
+};
+
+static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
+{
+	struct hisi_hba *hisi_hba = p;
+	u32 irq_value, irq_msk, err_value;
+	struct device *dev = &hisi_hba->pdev->dev;
+
+	irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0xfffffffe);
+
+	irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+	if (irq_value) {
+		if (irq_value & BIT(ENT_INT_SRC3_WP_DEPTH_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_WP_DEPTH_OFF);
+			panic("%s: write pointer and depth error (0x%x) \
+			       found!\n",
+			      dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					 1 <<
+					 ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF);
+			panic("%s: iptt no match slot error (0x%x) found!\n",
+			      dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_RP_DEPTH_OFF))
+			panic("%s: read pointer and depth error (0x%x) \
+			       found!\n",
+			      dev_name(dev), irq_value);
+
+		if (irq_value & BIT(ENT_INT_SRC3_AXI_OFF)) {
+			int i;
+
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_AXI_OFF);
+			err_value = hisi_sas_read32(hisi_hba,
+						    HGC_AXI_FIFO_ERR_INFO);
+
+			for (i = 0; i < AXI_ERR_NR; i++) {
+				if (err_value & BIT(i))
+					panic("%s: %s (0x%x) found!\n",
+					       dev_name(dev),
+					      axi_err_info[i], irq_value);
+			}
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_FIFO_OFF)) {
+			int i;
+
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_FIFO_OFF);
+			err_value = hisi_sas_read32(hisi_hba,
+						    HGC_AXI_FIFO_ERR_INFO);
+
+			for (i = 0; i < FIFO_ERR_NR; i++) {
+				if (err_value & BIT(AXI_ERR_NR + i))
+					panic("%s: %s (0x%x) found!\n",
+					      dev_name(dev),
+					      fifo_err_info[i], irq_value);
+			}
+
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_LM_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_LM_OFF);
+			panic("%s: LM add/fetch list error (0x%x) found!\n",
+			      dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_ABT_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_ABT_OFF);
+			panic("%s: SAS_HGC_ABT fetch LM list error (0x%x) found!\n",
+			      dev_name(dev), irq_value);
+		}
+	}
+
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t cq_interrupt_v2_hw(int irq_no, void *p)
 {
 	struct hisi_sas_cq *cq = p;
@@ -2192,6 +2582,11 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	int_chnl_int_v2_hw,
 };
 
+static irq_handler_t fatal_interrupts[HISI_SAS_FATAL_INT_NR] = {
+	fatal_ecc_int_v2_hw,
+	fatal_axi_int_v2_hw
+};
+
 /**
  * There is a limitation in the hip06 chipset that we need
  * to map in all mbigen interrupts, even if they are not used.
@@ -2247,6 +2642,26 @@ static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
 		}
 	}
 
+	for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++) {
+		int idx = i;
+
+		irq = irq_map[idx + 81];
+		if (!irq) {
+			dev_err(dev, "irq init: fail map fatal interrupt %d\n",
+				idx);
+			return -ENOENT;
+		}
+
+		rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
+				      DRV_NAME " fatal", hisi_hba);
+		if (rc) {
+			dev_err(dev,
+				"irq init: could not request fatal interrupt %d, rc=%d\n",
+				irq, rc);
+			return -ENOENT;
+		}
+	}
+
 	for (i = 0; i < hisi_hba->queue_count; i++) {
 		int idx = i + 96; /* First cq interrupt is irq96 */
 
-- 
1.9.1

  reply	other threads:[~2016-11-07 12:26 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-07 12:48 [PATCH 00/11] hisi_sas: some fixes, improvements, and new features John Garry
2016-11-07 12:48 ` John Garry [this message]
2016-11-16  1:47   ` [PATCH 01/11] hisi_sas: add v2 hw support for ECC and AXI bus fatal error Zhangfei Gao
2016-11-23  8:59     ` John Garry
2016-11-23  9:13       ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 02/11] hisi_sas: alloc queue id of slot according to device id John Garry
2016-11-16  1:41   ` Zhangfei Gao
2016-11-16 10:02     ` John Garry
2016-11-07 12:48 ` [PATCH 03/11] hisi_sas: only process broadcast change in phy_bcast_v2_hw() John Garry
2016-11-16  1:47   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 04/11] hisi_sas: fix port form bug in hisi_sas_port_notify_formed() John Garry
2016-11-16  1:43   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 05/11] hisi_sas: replace WARN_ON() with dev_warn() for internal abort John Garry
2016-11-23  8:57   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 06/11] hisi_sas: modify return value of hisi_sas_query_task() John Garry
2016-11-16  1:50   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 07/11] hisi_sas: delete repeated configuration in free_device_v2_hw() John Garry
2016-11-16  1:43   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 08/11] hisi_sas: modify some values in get_ata_protocol() John Garry
2016-11-16  1:44   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 09/11] hisi_sas: check SATA FIS when directly attaching SATA device John Garry
2016-11-16  1:49   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 10/11] hisi_sas: use atomic64_t for hisi_sas_device.running_req John Garry
2016-11-16  1:44   ` Zhangfei Gao
2016-11-07 12:48 ` [PATCH 11/11] hisi_sas: add PHY set linkrate support for v1 and v2 hw John Garry
2016-11-16  1:48   ` Zhangfei Gao
2016-11-14 23:49 ` [PATCH 00/11] hisi_sas: some fixes, improvements, and new features Martin K. Petersen
2016-11-22 16:41   ` John Garry
2016-11-22 22:01     ` Martin K. Petersen
2016-11-25 11:40       ` John Garry
2016-11-25 14:55         ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1478522920-108145-2-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=chenxiang66@hisilicon.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=john.garry2@mail.dcu.ie \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®