From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy@broadcom.com>
Subject: [PATCH 6/6] arm: dts: nsp: Add USB nodes to device tree
Date: Wed, 9 Nov 2016 04:33:14 -0500 [thread overview]
Message-ID: <1478683994-12008-7-git-send-email-yendapally.reddy@broadcom.com> (raw)
In-Reply-To: <1478683994-12008-1-git-send-email-yendapally.reddy@broadcom.com>
Add USB nodes to the Northstar plus device tree file
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 57 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm958625k.dts | 16 +++++++++++
2 files changed, 73 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7c9e0fa..acdb576 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -249,6 +249,34 @@
status = "disabled";
};
+ xhci: usb@29000 {
+ compatible = "generic-xhci";
+ reg = <0x29000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci0: usb@2a000 {
+ compatible = "generic-ehci";
+ reg = <0x2a000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@2b000 {
+ compatible = "generic-ohci";
+ reg = <0x2b000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mdio: mdio@32000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x32000 0x8>;
+ };
+
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
@@ -319,6 +347,30 @@
"sata2";
};
+ mdio_mux: mdio-mux@3f190 {
+ compatible = "brcm,mdio-mux-nsp";
+ reg = <0x3f190 0x4>,
+ <0x32000 0x4>;
+ reg-names = "bus-ctrl", "mgmt-ctrl";
+ mdio-parent-bus = <&mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_phy: usb3-phy@10 {
+ compatible = "brcm,nsp-usb3-phy";
+ reg = <0x10>;
+ usb3-ctrl-syscon = <&usb3_ctrl>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
pinctrl: pinctrl@3f1c0 {
compatible = "brcm,nsp-pinmux";
reg = <0x3f1c0 0x04>,
@@ -367,6 +419,11 @@
phy-names = "sata-phy";
};
};
+
+ usb3_ctrl: syscon@104408 {
+ compatible = "brcm,nsp-usb3-ctrl", "syscon";
+ reg = <0x104408 0x3fc>;
+ };
};
pcie0: pcie@18012000 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 05c5f98..c7303fa 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -53,6 +53,22 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
--
2.1.0
next prev parent reply other threads:[~2016-11-09 9:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 9:33 [PATCH 0/6] USB support for Broadcom NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-11-09 9:33 ` [PATCH 1/6] dt-bindings: mdio-mux: Add documentation for mdio mux for " Yendapally Reddy Dhananjaya Reddy
2016-11-09 14:34 ` Andrew Lunn
2016-11-09 22:23 ` Scott Branden
2016-11-14 17:22 ` Rob Herring
2016-11-09 9:33 ` [PATCH 2/6] dt-bindings: phy: Add documentation for NSP USB3 PHY Yendapally Reddy Dhananjaya Reddy
2016-11-14 17:23 ` Rob Herring
2016-11-09 9:33 ` [PATCH 3/6] net: mdio-mux: Add MDIO mux driver for NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-11-09 14:45 ` Andrew Lunn
2016-11-09 9:33 ` [PATCH 4/6] net: phy: Initialize mdio clock at probe function Yendapally Reddy Dhananjaya Reddy
2016-11-09 9:33 ` [PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-11-09 9:33 ` Yendapally Reddy Dhananjaya Reddy [this message]
2016-12-13 2:20 ` [PATCH 0/6] USB " Florian Fainelli
2017-01-16 9:17 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478683994-12008-7-git-send-email-yendapally.reddy@broadcom.com \
--to=yendapally.reddy@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jonmason@broadcom.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®