[PATCH 0/2] arm64: dts: NS2: Add sdio1, PCI phys

[PATCH 0/2] arm64: dts: NS2: Add sdio1, PCI phys

[Jon Mason]

The second SDIO seems to have been forgotten to be enabled in the
Northstar2 SVK dts.  Also, the PCI PHY entries are missing from the PCI
bus device tree entries.

Jon Mason (2):
  arm64: dts: NS2: enable sdio1
  arm64: dts: NS2: Add PCI PHYs

 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 ++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 6 ++++++
 2 files changed, 10 insertions(+)

-- 
2.7.4

[PATCH 1/2] arm64: dts: NS2: enable sdio1

[Jon Mason]

Enable sdio1 in the Northstar2 SVK device tree file

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 07c69a3e..de8d379 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -161,6 +161,10 @@
 	status = "ok";
 };
 
+&sdio1 {
+	status = "ok";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
-- 
2.7.4

[PATCH 2/2] arm64: dts: NS2: Add PCI PHYs

[Jon Mason]

PCI PHYs are missing from the Northstar2 DT entries for the 2 PCI buses.
Add them so that PCI devices can be discovered.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index e4cd868..4fcdeca 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -133,6 +133,9 @@
 
 		status = "disabled";
 
+		phys = <&pci_phy0>;
+		phy-names = "pcie-phy";
+
 		msi-parent = <&msi0>;
 		msi0: msi@20020000 {
 			compatible = "brcm,iproc-msi";
@@ -171,6 +174,9 @@
 
 		status = "disabled";
 
+		phys = <&pci_phy1>;
+		phy-names = "pcie-phy";
+
 		msi-parent = <&msi4>;
 		msi4: msi@50020000 {
 			compatible = "brcm,iproc-msi";
-- 
2.7.4

Re: [PATCH 0/2] arm64: dts: NS2: Add sdio1, PCI phys

[Florian Fainelli]

On 11/17/2016 03:25 PM, Jon Mason wrote:
> The second SDIO seems to have been forgotten to be enabled in the
> Northstar2 SVK dts.  Also, the PCI PHY entries are missing from the PCI
> bus device tree entries.

Series applied, thanks Jon
-- 
Florian