mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: Siddharth Vadapalli <s-vadapalli@ti.com>,
	vkoul@kernel.org, kishon@kernel.org, sjakhade@cadence.com,
	rogerq@kernel.org, thomas.richard@bootlin.com,
	u.kleine-koenig@baylibre.com, eballetb@redhat.com
Cc: linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, srk@ti.com
Subject: Re: [PATCH v2 1/2] phy: cadence-torrent: Add PCIe multilink configuration for 100 MHz refclk
Date: Mon, 6 Jan 2025 23:00:14 +0100	[thread overview]
Message-ID: <1483780d-115f-4555-82b3-3e9cffe82dce@wanadoo.fr> (raw)
In-Reply-To: <20250106131925.263240-2-s-vadapalli@ti.com>

Le 06/01/2025 à 14:19, Siddharth Vadapalli a écrit :
> From: Swapnil Jakhade <sjakhade@cadence.com>
> 
> Add register sequences to support PCIe multilink configuration for 100MHz
> reference clock. Maximum two PCIe links are supported.
> 
> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> 
> ***NOTE***
> Since I don't have the hardware required to validate PCIe Multilink +
> USB functionality, kindly *do not merge* this series until it gets a
> "Tested-by" tag with proper validation of the functionality.
> 
> Regards,
> Siddharth.
> 
>   drivers/phy/cadence/phy-cadence-torrent.c | 130 +++++++++++++++++++++-
>   1 file changed, 129 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
> index a281c0dfae97..b0b5f4bdd7e2 100644
> --- a/drivers/phy/cadence/phy-cadence-torrent.c
> +++ b/drivers/phy/cadence/phy-cadence-torrent.c
> @@ -197,6 +197,7 @@
>   #define RX_SDCAL1_INIT_TMR		0x004CU
>   #define RX_SDCAL1_ITER_TMR		0x004DU
>   #define RX_CDRLF_CNFG			0x0080U
> +#define RX_CDRLF_CNFG2			0x0081U
>   #define RX_CDRLF_CNFG3			0x0082U
>   #define RX_SIGDET_HL_FILT_TMR		0x0090U
>   #define RX_REE_GCSM1_CTRL		0x0108U
> @@ -204,6 +205,7 @@
>   #define RX_REE_GCSM1_EQENM_PH2		0x010AU
>   #define RX_REE_GCSM2_CTRL		0x0110U
>   #define RX_REE_PERGCSM_CTRL		0x0118U
> +#define RX_REE_PEAK_UTHR		0x0142U
>   #define RX_REE_ATTEN_THR		0x0149U
>   #define RX_REE_TAP1_CLIP		0x0171U
>   #define RX_REE_TAP2TON_CLIP		0x0172U
> @@ -212,6 +214,7 @@
>   #define RX_DIAG_DFE_CTRL		0x01E0U
>   #define RX_DIAG_DFE_AMP_TUNE_2		0x01E2U
>   #define RX_DIAG_DFE_AMP_TUNE_3		0x01E3U
> +#define RX_DIAG_REE_DAC_CTRL		0x01E4U
>   #define RX_DIAG_NQST_CTRL		0x01E5U
>   #define RX_DIAG_SIGDET_TUNE		0x01E8U
>   #define RX_DIAG_PI_RATE			0x01F4U
> @@ -3131,6 +3134,101 @@ static void cdns_torrent_phy_remove(struct platform_device *pdev)
>   	cdns_torrent_clk_cleanup(cdns_phy);
>   }
>   
> +/* Multi link PCIe configuration */
> +static struct cdns_reg_pairs ml_pcie_link_cmn_regs[] = {
> +	{0x0002, PHY_PLL_CFG},
> +	{0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0}
> +};

I think that some, if not all, of these new struct could be const, as 
elsewhere in this file.

> +
> +static struct cdns_reg_pairs ml_pcie_xcvr_diag_ln_regs[] = {
> +	{0x0100, XCVR_DIAG_HSCLK_SEL},
> +	{0x0001, XCVR_DIAG_HSCLK_DIV},
> +	{0x0812, XCVR_DIAG_PLLDRC_CTRL}
> +};

...

CJ

  reply	other threads:[~2025-01-06 22:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-06 13:19 [PATCH v2 0/2] Enable PCIe Multilink and USB support in Cadence Torrent SERDES driver Siddharth Vadapalli
2025-01-06 13:19 ` [PATCH v2 1/2] phy: cadence-torrent: Add PCIe multilink configuration for 100 MHz refclk Siddharth Vadapalli
2025-01-06 22:00   ` Christophe JAILLET [this message]
2025-01-07  5:17     ` Siddharth Vadapalli
2025-01-06 13:19 ` [PATCH v2 2/2] phy: cadence-torrent: Add PCIe multilink + USB with same SSC register config " Siddharth Vadapalli
2025-01-06 22:05   ` Christophe JAILLET
2025-01-07  5:19     ` Siddharth Vadapalli
2025-01-09 12:20       ` Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483780d-115f-4555-82b3-3e9cffe82dce@wanadoo.fr \
    --to=christophe.jaillet@wanadoo.fr \
    --cc=eballetb@redhat.com \
    --cc=kishon@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=rogerq@kernel.org \
    --cc=s-vadapalli@ti.com \
    --cc=sjakhade@cadence.com \
    --cc=srk@ti.com \
    --cc=thomas.richard@bootlin.com \
    --cc=u.kleine-koenig@baylibre.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®