From: Smitha T Murthy <smitha.t@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kyungmin.park@samsung.com, kamil@wypas.org, jtp.park@samsung.com,
a.hajda@samsung.com, mchehab@kernel.org,
pankaj.dubey@samsung.com, krzk@kernel.org,
m.szyprowski@samsung.com, s.nawrocki@samsung.com,
Smitha T Murthy <smitha.t@samsung.com>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: [PATCH 11/11] Documention: v4l: Documentation for HEVC CIDs
Date: Wed, 18 Jan 2017 15:32:09 +0530 [thread overview]
Message-ID: <1484733729-25371-12-git-send-email-smitha.t@samsung.com> (raw)
In-Reply-To: <1484733729-25371-1-git-send-email-smitha.t@samsung.com>
Added V4l2 controls for HEVC encoder
CC: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
Documentation/media/uapi/v4l/extended-controls.rst | 190 ++++++++++++++++++++
1 files changed, 190 insertions(+), 0 deletions(-)
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index abb1057..fe23919 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -1960,6 +1960,196 @@ enum v4l2_vp8_golden_frame_sel -
1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
+HEVC Control Reference
+---------------------
+
+The HEVC controls include controls for encoding parameters of HEVC video
+codec.
+
+
+.. _hevc-control-id:
+
+HEVC Control IDs
+^^^^^^^^^^^^^^^
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP``
+ Minimum quantization parameter for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP``
+ Maximum quantization parameter for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP``
+ Quantization parameter for an I frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP``
+ Quantization parameter for a P frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP``
+ Quantization parameter for a B frame for HEVC.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_QP_ENABLE``
+ Enable the QP values for temporal layer.
+
+.. _v4l2-mpeg-video-hevc-hier-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_TYPE``
+ (enum)
+
+enum v4l2_mpeg_video_hevc_hier_coding_type -
+ Selects the hierarchical coding type for encoding. Possible values are:
+
+.. raw:: latex
+
+ \begin{adjustbox}{width=\columnwidth}
+
+.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
+ - Use the B frame for hierarchical coding.
+ * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
+ - Use the P frame for hierarchical coding.
+
+.. raw:: latex
+
+ \end{adjustbox}
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER``
+ Indicates the hierarchical coding layer.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_QP``
+ Indicates the hierarchical coding layer quantization parameter.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
+ Select the desired profile for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
+ Selects the desired level for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_RC_FRAME_RATE``
+ Selects the RC filter frame rate for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
+ By default selects HEVC tier_flag as Main.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH``
+ Selects HEVC Maximum coding unit depth.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REF_NUMBER_FOR_PFRAMES``
+ Selects number of P reference picture required for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_DISABLE``
+ Disables HEVC filter.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_SLICE_BOUNDARY``
+ Selects across or not slice boundary for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2``
+ Selects HEVC loop filter beta offset.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2``
+ Selects HEVC loop filter tc offset.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
+ Selects refresh type for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD``
+ Selects the refresh period for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU_ENABLE``
+ Selects HEVC lossless encoding.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED_ENABLE``
+ Enables constant intra prediction for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT_ENABLE``
+ Enables wavefront for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LTR_ENABLE``
+ Enables long term reference for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_USER_REF``
+ Selects user long term reference frame.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_STORE_REF``
+ Stores long term reference frame.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SIGN_DATA_HIDING``
+ Enable sign data hiding for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB_ENABLE``
+ Enable general picture buffers for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID_ENABLE``
+ Enable temporal ID for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOTHING_FLAG``
+ Enable HEVC Strong intra smoothing.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1``
+ Indicates max number of candidate motion vectors.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_DARK``
+ Indicates HEVC dark region adaptive.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_SMOOTH``
+ Indicates HEVC smooth region adaptive.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_STATIC``
+ Indicates HEVC static region adaptive.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_ACTIVITY``
+ Indicates HEVC activity adaptive.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_DISABLE_INTRA_PU_SPLIT``
+ Disables intra pu split for HEVC Encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_DISABLE_TMV_PREDICTION``
+ Disables tmv prediction for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE_ENABLE``
+ Enabling HEVC encoding without a startcode.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CR``
+ Indicates the quantization parameter CR index.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CB``
+ Indicates the quantization parameter CB index.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
+ Indicates size of length field for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PREPEND_SPSPPS_TO_IDR``
+ Indicates prepend SPS/PPS to every IDR.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_CH``
+ Indicates hierarchical coding layer change for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT0``
+ Indicates hierarchical coding layer BIT0 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT1``
+ Indicates hierarchical coding layer BIT1 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT2``
+ Indicates hierarchical coding layer BIT2 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT3``
+ Indicates hierarchical coding layer BIT3 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT4``
+ Indicates hierarchical coding layer BIT4 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT5``
+ Indicates hierarchical coding layer BIT5 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_BIT6``
+ Indicates hierarchical coding layer BIT6 for HEVC encoder.
+
+
.. _camera-controls:
Camera Control Reference
--
1.7.2.3
prev parent reply other threads:[~2017-01-18 10:13 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170118100714epcas1p274e2e68d14a788417fbde2c26c91bcb9@epcas1p2.samsung.com>
2017-01-18 10:01 ` [PATCH 00/11] Add MFC v10.10 support Smitha T Murthy
[not found] ` <CGME20170118100718epcas5p1f9aebb16fc61d41a13d09054fa96a14d@epcas5p1.samsung.com>
2017-01-18 10:01 ` [PATCH 01/11] [media] s5p-mfc: Rename IS_MFCV8 macro Smitha T Murthy
2017-01-18 14:51 ` Andrzej Hajda
2017-01-31 8:56 ` Smitha T Murthy
[not found] ` <CGME20170118100723epcas5p132e0ebfad38261bed95cffc47334f9dc@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 02/11] [media] s5p-mfc: Adding initial support for MFC v10.10 Smitha T Murthy
2017-01-18 15:10 ` Andrzej Hajda
2017-01-31 9:12 ` Smitha T Murthy
2017-01-21 20:28 ` Rob Herring
2017-02-06 8:37 ` Smitha T Murthy
[not found] ` <CGME20170118100726epcas1p2d443360ea389ccb0826a1b5c5512da55@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 03/11] [media] s5p-mfc: Use min scratch buffer size Smitha T Murthy
2017-02-02 7:16 ` Andrzej Hajda
2017-02-06 8:38 ` Smitha T Murthy
[not found] ` <CGME20170118100731epcas5p16f07548a8a6c95f2ef539704e032a54d@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 04/11] [media] s5p-mfc: Support MFCv10.10 buffer requirements Smitha T Murthy
2017-02-02 8:30 ` Andrzej Hajda
2017-02-06 8:41 ` Smitha T Murthy
[not found] ` <CGME20170118100737epcas1p269ede3c99e71ce55b934945cd20181e1@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder Smitha T Murthy
2017-02-02 7:58 ` Andrzej Hajda
2017-02-02 8:20 ` Andrzej Hajda
2017-02-06 8:39 ` Smitha T Murthy
2017-02-06 8:39 ` Smitha T Murthy
[not found] ` <CGME20170118100742epcas5p1bb390dffa4fe530d94573f41d8791ef7@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 06/11] [media] videodev2.h: Add v4l2 definition for HEVC Smitha T Murthy
2017-02-02 8:34 ` Andrzej Hajda
2017-02-06 8:41 ` Smitha T Murthy
[not found] ` <CGME20170118100756epcas1p2c8a93b383a4c85648b5e9efac8cea9c7@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 08/11] [media] s5p-mfc: Add VP9 decoder support Smitha T Murthy
2017-02-02 8:39 ` Andrzej Hajda
2017-02-06 8:42 ` Smitha T Murthy
[not found] ` <CGME20170118100807epcas5p1a0af682c334aa9581f32cbf7f1f264c2@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 09/11] [media] s5p-mfc: Add support for HEVC encoder Smitha T Murthy
2017-02-02 8:55 ` Andrzej Hajda
2017-02-06 8:42 ` Smitha T Murthy
[not found] ` <CGME20170118100818epcas5p1c7153a6fe9d93f96269008f42f736b90@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 10/11] [media] v4l2: Add v4l2 control IDs " Smitha T Murthy
2017-02-06 14:54 ` Andrzej Hajda
2017-02-13 5:33 ` Smitha T Murthy
[not found] ` <CGME20170118100827epcas5p16023525ba778b58b8e9a31b8a764b382@epcas5p1.samsung.com>
2017-01-18 10:02 ` Smitha T Murthy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484733729-25371-12-git-send-email-smitha.t@samsung.com \
--to=smitha.t@samsung.com \
--cc=a.hajda@samsung.com \
--cc=jtp.park@samsung.com \
--cc=kamil@wypas.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®