From: Andrzej Hajda <a.hajda@samsung.com>
To: Smitha T Murthy <smitha.t@samsung.com>,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kyungmin.park@samsung.com, kamil@wypas.org, jtp.park@samsung.com,
mchehab@kernel.org, pankaj.dubey@samsung.com, krzk@kernel.org,
m.szyprowski@samsung.com, s.nawrocki@samsung.com,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 02/11] [media] s5p-mfc: Adding initial support for MFC v10.10
Date: Wed, 18 Jan 2017 16:10:39 +0100 [thread overview]
Message-ID: <ec5c2602-627e-7a42-eda2-6a68b846fff8@samsung.com> (raw)
In-Reply-To: <1484733729-25371-3-git-send-email-smitha.t@samsung.com>
On 18.01.2017 11:02, Smitha T Murthy wrote:
> Adding the support for MFC v10.10, with new register file and
> necessary hw control, decoder, encoder and structural changes.
>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: devicetree@vger.kernel.org
> Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
> ---
> .../devicetree/bindings/media/s5p-mfc.txt | 1 +
> drivers/media/platform/s5p-mfc/regs-mfc-v10.h | 36 ++++++++++++++++
> drivers/media/platform/s5p-mfc/s5p_mfc.c | 30 +++++++++++++
> drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 4 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 4 ++
> drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 44 +++++++++++---------
> drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 21 +++++----
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 9 +++-
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h | 2 +
> 9 files changed, 118 insertions(+), 33 deletions(-)
> create mode 100644 drivers/media/platform/s5p-mfc/regs-mfc-v10.h
>
> diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
> index 2c90128..b70c613 100644
> --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
> +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
> @@ -13,6 +13,7 @@ Required properties:
> (c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
> (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
> (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
> + (f) "samsung,mfc-v10" for MFC v10 present in a variant of Exynos7 SoC
Could you specify explicitly SoC version(s), Exynos7 is misleading.
Btw are there plans to upstream platforms using this MFC?
>
> - reg : Physical base address of the IP registers and length of memory
> mapped region.
> diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> new file mode 100644
> index 0000000..bd671a5
> --- /dev/null
> +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> @@ -0,0 +1,36 @@
> +/*
> + * Register definition file for Samsung MFC V10.x Interface (FIMV) driver
> + *
> + * Copyright (c) 2017 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _REGS_MFC_V10_H
> +#define _REGS_MFC_V10_H
> +
> +#include <linux/sizes.h>
> +#include "regs-mfc-v8.h"
> +
> +/* MFCv10 register definitions*/
> +#define S5P_FIMV_MFC_CLOCK_OFF_V10 0x7120
> +#define S5P_FIMV_MFC_STATE_V10 0x7124
> +
> +/* MFCv10 Context buffer sizes */
> +#define MFC_CTX_BUF_SIZE_V10 (30 * SZ_1K) /* 30KB */
> +#define MFC_H264_DEC_CTX_BUF_SIZE_V10 (2 * SZ_1M) /* 2MB */
> +#define MFC_OTHER_DEC_CTX_BUF_SIZE_V10 (20 * SZ_1K) /* 20KB */
> +#define MFC_H264_ENC_CTX_BUF_SIZE_V10 (100 * SZ_1K) /* 100KB */
> +#define MFC_OTHER_ENC_CTX_BUF_SIZE_V10 (15 * SZ_1K) /* 15KB */
> +
> +/* MFCv10 variant defines */
> +#define MAX_FW_SIZE_V10 (SZ_1M) /* 1MB */
> +#define MAX_CPB_SIZE_V10 (3 * SZ_1M) /* 3MB */
> +#define MFC_VERSION_V10 0xA0
> +#define MFC_NUM_PORTS_V10 1
> +
> +#endif /*_REGS_MFC_V10_H*/
> +
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index bb0a588..a043cce 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -1542,6 +1542,33 @@ static int s5p_mfc_resume(struct device *dev)
> .num_clocks = 3,
> };
>
> +static struct s5p_mfc_buf_size_v6 mfc_buf_size_v10 = {
> + .dev_ctx = MFC_CTX_BUF_SIZE_V10,
> + .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V10,
> + .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V10,
> + .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V10,
> + .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V10,
> +};
> +
> +static struct s5p_mfc_buf_size buf_size_v10 = {
> + .fw = MAX_FW_SIZE_V10,
> + .cpb = MAX_CPB_SIZE_V10,
> + .priv = &mfc_buf_size_v10,
> +};
> +
> +static struct s5p_mfc_buf_align mfc_buf_align_v10 = {
> + .base = 0,
> +};
> +
> +static struct s5p_mfc_variant mfc_drvdata_v10 = {
> + .version = MFC_VERSION_V10,
> + .version_bit = MFC_V10_BIT,
> + .port_num = MFC_NUM_PORTS_V10,
> + .buf_size = &buf_size_v10,
> + .buf_align = &mfc_buf_align_v10,
> + .fw_name[0] = "s5p-mfc-v10.fw",
Is firmware file publicly available? Sent to firmware repository?
> +};
> +
> static const struct of_device_id exynos_mfc_match[] = {
> {
> .compatible = "samsung,mfc-v5",
> @@ -1558,6 +1585,9 @@ static int s5p_mfc_resume(struct device *dev)
> }, {
> .compatible = "samsung,exynos5433-mfc",
> .data = &mfc_drvdata_v8_5433,
> + }, {
> + .compatible = "samsung,mfc-v10",
> + .data = &mfc_drvdata_v10,
> },
> {},
> };
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> index b45d18c..1941c63 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> @@ -23,7 +23,7 @@
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-v4l2.h>
> #include "regs-mfc.h"
> -#include "regs-mfc-v8.h"
> +#include "regs-mfc-v10.h"
>
> #define S5P_MFC_NAME "s5p-mfc"
>
> @@ -723,11 +723,13 @@ struct mfc_control {
> #define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60 ? 1 : 0)
> #define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70 ? 1 : 0)
> #define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80 ? 1 : 0)
> +#define IS_MFCV10(dev) (dev->variant->version >= 0xA0 ? 1 : 0)
>
> #define MFC_V5_BIT BIT(0)
> #define MFC_V6_BIT BIT(1)
> #define MFC_V7_BIT BIT(2)
> #define MFC_V8_BIT BIT(3)
> +#define MFC_V10_BIT BIT(5)
I think you can use BIT(4) here.
Regards
Andrzej
next prev parent reply other threads:[~2017-01-18 15:10 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170118100714epcas1p274e2e68d14a788417fbde2c26c91bcb9@epcas1p2.samsung.com>
2017-01-18 10:01 ` [PATCH 00/11] Add MFC v10.10 support Smitha T Murthy
[not found] ` <CGME20170118100718epcas5p1f9aebb16fc61d41a13d09054fa96a14d@epcas5p1.samsung.com>
2017-01-18 10:01 ` [PATCH 01/11] [media] s5p-mfc: Rename IS_MFCV8 macro Smitha T Murthy
2017-01-18 14:51 ` Andrzej Hajda
2017-01-31 8:56 ` Smitha T Murthy
[not found] ` <CGME20170118100723epcas5p132e0ebfad38261bed95cffc47334f9dc@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 02/11] [media] s5p-mfc: Adding initial support for MFC v10.10 Smitha T Murthy
2017-01-18 15:10 ` Andrzej Hajda [this message]
2017-01-31 9:12 ` Smitha T Murthy
2017-01-21 20:28 ` Rob Herring
2017-02-06 8:37 ` Smitha T Murthy
[not found] ` <CGME20170118100726epcas1p2d443360ea389ccb0826a1b5c5512da55@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 03/11] [media] s5p-mfc: Use min scratch buffer size Smitha T Murthy
2017-02-02 7:16 ` Andrzej Hajda
2017-02-06 8:38 ` Smitha T Murthy
[not found] ` <CGME20170118100731epcas5p16f07548a8a6c95f2ef539704e032a54d@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 04/11] [media] s5p-mfc: Support MFCv10.10 buffer requirements Smitha T Murthy
2017-02-02 8:30 ` Andrzej Hajda
2017-02-06 8:41 ` Smitha T Murthy
[not found] ` <CGME20170118100737epcas1p269ede3c99e71ce55b934945cd20181e1@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder Smitha T Murthy
2017-02-02 7:58 ` Andrzej Hajda
2017-02-02 8:20 ` Andrzej Hajda
2017-02-06 8:39 ` Smitha T Murthy
2017-02-06 8:39 ` Smitha T Murthy
[not found] ` <CGME20170118100742epcas5p1bb390dffa4fe530d94573f41d8791ef7@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 06/11] [media] videodev2.h: Add v4l2 definition for HEVC Smitha T Murthy
2017-02-02 8:34 ` Andrzej Hajda
2017-02-06 8:41 ` Smitha T Murthy
[not found] ` <CGME20170118100756epcas1p2c8a93b383a4c85648b5e9efac8cea9c7@epcas1p2.samsung.com>
2017-01-18 10:02 ` [PATCH 08/11] [media] s5p-mfc: Add VP9 decoder support Smitha T Murthy
2017-02-02 8:39 ` Andrzej Hajda
2017-02-06 8:42 ` Smitha T Murthy
[not found] ` <CGME20170118100807epcas5p1a0af682c334aa9581f32cbf7f1f264c2@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 09/11] [media] s5p-mfc: Add support for HEVC encoder Smitha T Murthy
2017-02-02 8:55 ` Andrzej Hajda
2017-02-06 8:42 ` Smitha T Murthy
[not found] ` <CGME20170118100818epcas5p1c7153a6fe9d93f96269008f42f736b90@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 10/11] [media] v4l2: Add v4l2 control IDs " Smitha T Murthy
2017-02-06 14:54 ` Andrzej Hajda
2017-02-13 5:33 ` Smitha T Murthy
[not found] ` <CGME20170118100827epcas5p16023525ba778b58b8e9a31b8a764b382@epcas5p1.samsung.com>
2017-01-18 10:02 ` [PATCH 11/11] Documention: v4l: Documentation for HEVC CIDs Smitha T Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec5c2602-627e-7a42-eda2-6a68b846fff8@samsung.com \
--to=a.hajda@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=jtp.park@samsung.com \
--cc=kamil@wypas.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=smitha.t@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®