From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-remoteproc@vger.kernel.org,
Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [PATCH v3 1/4] remoteproc: qcom: Compatible string based resource initialization.
Date: Mon, 30 Jan 2017 20:33:06 +0530 [thread overview]
Message-ID: <1485788589-21968-2-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1485788589-21968-1-git-send-email-akdwived@codeaurora.org>
This patch initialize certain driver related data based on compatible
string. This enable driver to handle more than one similar device in
by differentiating in probe their private data.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
drivers/remoteproc/qcom_adsp_pil.c | 47 ++++++++++++++++++++++++++------------
1 file changed, 33 insertions(+), 14 deletions(-)
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 43a4ed2..f674301 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -32,9 +32,12 @@
#include "qcom_mdt_loader.h"
#include "remoteproc_internal.h"
-#define ADSP_CRASH_REASON_SMEM 423
-#define ADSP_FIRMWARE_NAME "adsp.mdt"
-#define ADSP_PAS_ID 1
+struct adsp_data {
+ int crash_reason_smem;
+ const char *firmware_name;
+ int pas_id;
+};
+
struct qcom_adsp {
struct device *dev;
@@ -53,6 +56,9 @@ struct qcom_adsp {
struct regulator *cx_supply;
+ int pas_id;
+ int crash_reason_smem;
+
struct completion start_done;
struct completion stop_done;
@@ -70,7 +76,7 @@ static int adsp_load(struct rproc *rproc, const struct firmware *fw)
bool relocate;
int ret;
- ret = qcom_scm_pas_init_image(ADSP_PAS_ID, fw->data, fw->size);
+ ret = qcom_scm_pas_init_image(adsp->pas_id, fw->data, fw->size);
if (ret) {
dev_err(&rproc->dev, "invalid firmware metadata\n");
return ret;
@@ -85,7 +91,8 @@ static int adsp_load(struct rproc *rproc, const struct firmware *fw)
if (relocate) {
adsp->mem_reloc = fw_addr;
- ret = qcom_scm_pas_mem_setup(ADSP_PAS_ID, adsp->mem_phys, fw_size);
+ ret = qcom_scm_pas_mem_setup(adsp->pas_id,
+ adsp->mem_phys, fw_size);
if (ret) {
dev_err(&rproc->dev, "unable to setup memory for image\n");
return ret;
@@ -113,7 +120,7 @@ static int adsp_start(struct rproc *rproc)
if (ret)
goto disable_clocks;
- ret = qcom_scm_pas_auth_and_reset(ADSP_PAS_ID);
+ ret = qcom_scm_pas_auth_and_reset(adsp->pas_id);
if (ret) {
dev_err(adsp->dev,
"failed to authenticate image and release reset\n");
@@ -124,7 +131,7 @@ static int adsp_start(struct rproc *rproc)
msecs_to_jiffies(5000));
if (!ret) {
dev_err(adsp->dev, "start timed out\n");
- qcom_scm_pas_shutdown(ADSP_PAS_ID);
+ qcom_scm_pas_shutdown(adsp->pas_id);
ret = -ETIMEDOUT;
goto disable_regulators;
}
@@ -157,7 +164,7 @@ static int adsp_stop(struct rproc *rproc)
BIT(adsp->stop_bit),
0);
- ret = qcom_scm_pas_shutdown(ADSP_PAS_ID);
+ ret = qcom_scm_pas_shutdown(adsp->pas_id);
if (ret)
dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
@@ -197,7 +204,7 @@ static irqreturn_t adsp_fatal_interrupt(int irq, void *dev)
size_t len;
char *msg;
- msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, ADSP_CRASH_REASON_SMEM, &len);
+ msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, adsp->crash_reason_smem, &len);
if (!IS_ERR(msg) && len > 0 && msg[0])
dev_err(adsp->dev, "fatal error received: %s\n", msg);
@@ -311,20 +318,25 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
static int adsp_probe(struct platform_device *pdev)
{
+ const struct adsp_data *desc;
struct qcom_adsp *adsp;
struct rproc *rproc;
int ret;
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
if (!qcom_scm_is_available())
return -EPROBE_DEFER;
- if (!qcom_scm_pas_supported(ADSP_PAS_ID)) {
- dev_err(&pdev->dev, "PAS is not available for ADSP\n");
+ if (!qcom_scm_pas_supported(desc->pas_id)) {
+ dev_err(&pdev->dev, "PAS is not available for subsystem\n");
return -ENXIO;
}
rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
- ADSP_FIRMWARE_NAME, sizeof(*adsp));
+ desc->firmware_name, sizeof(*adsp));
if (!rproc) {
dev_err(&pdev->dev, "unable to allocate remoteproc\n");
return -ENOMEM;
@@ -344,6 +356,8 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
+ adsp->pas_id = desc->pas_id;
+ adsp->crash_reason_smem = desc->crash_reason_smem;
ret = adsp_init_clock(adsp);
if (ret)
goto free_rproc;
@@ -407,9 +421,14 @@ static int adsp_remove(struct platform_device *pdev)
return 0;
}
+static const struct adsp_data adsp_resource_init = {
+ .crash_reason_smem = 423,
+ .firmware_name = "adsp.mdt",
+ .pas_id = 1,
+};
static const struct of_device_id adsp_of_match[] = {
- { .compatible = "qcom,msm8974-adsp-pil" },
- { .compatible = "qcom,msm8996-adsp-pil" },
+ { .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
+ { .compatible = "qcom,msm8996-adsp-pil", .data = &adsp_resource_init},
{ },
};
MODULE_DEVICE_TABLE(of, adsp_of_match);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2017-01-30 15:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-30 15:03 [PATCH v3 0/4]remoteproc: qcom: Add support for Qualcomm low pass sensor peripheral loader Avaneesh Kumar Dwivedi
2017-01-30 15:03 ` Avaneesh Kumar Dwivedi [this message]
2017-01-30 21:45 ` [PATCH v3 1/4] remoteproc: qcom: Compatible string based resource initialization Bjorn Andersson
2017-01-30 15:03 ` [PATCH v3 2/4] remoteproc: qcom: Add additional agree2_clk and px regulator resource Avaneesh Kumar Dwivedi
2017-01-30 21:46 ` Bjorn Andersson
2017-01-31 5:58 ` Dwivedi, Avaneesh Kumar (avani)
2017-01-31 6:05 ` Bjorn Andersson
2017-01-30 15:03 ` [PATCH v3 3/4] remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc Avaneesh Kumar Dwivedi
2017-01-30 21:50 ` Bjorn Andersson
2017-01-30 15:03 ` [PATCH v3 4/4] arm64: dts: msm8996: Add SLPI SMP2P dt node Avaneesh Kumar Dwivedi
2017-01-31 1:33 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485788589-21968-2-git-send-email-akdwived@codeaurora.org \
--to=akdwived@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome